Unknown (Unspecified Location) Tender Results

Set of Hex. Head screw consisting of two items.

High Voltage HRC Fuse

Channel for Rubber Cladding

Hydraulic low lift tackle.

OLMESARTAN 40 MG ORAL TABLET

TAB SILODOSIN 8 MG + DUTASTERIDE 0.5 MG/TAB/CAP IN STRIPS

SUCTION STRAINER

Punched Washer A36 (for Bolt or Screw size M 33)

TUMBLER GLASS HEAVY BASE OF CAPACITY 285 ML %B1 5 % BASE THICKNESS 10 MM %B1 2 MM,THICKNESS OF GLASS 2MM APPROX ,HEIGHT 120 MM %B1 3MM TO IS: 1961/1968 WITH AMENDMENT NO.3.NOTE:- INDIAN RAILWAY LOGO TO BE PRINTED.

CYLINDRICAL ROLLER AXLE BOX BEARING

IMATINIB 400 MG TAB/CAP

Overhauling Kit for Magnet Valve

set of Pneumatic grease pumps

Pin Large with Collar for Equalizing Stay 16T/ BG-ICF. ICF Drawing no.:- WLRRM- 0-5-003 Item 11 & 12, alt.-G/9 Mat. Spec.:- As per drawing with latest revision and amendments.

Set of Cylindrical Roller Bearing (NDE side), as per ABB Drg. No.(ABB DRG.NO IBO12-00584)-1 OR Schaeffler (imported) NJ1044.566185 + HJ1044 or SKF (imported) NJ1044 MP C4VA 327 + HJ1044 VA335 or NEI (indigenous) NH 1044 to NEI Drg. No. PESD 3453 Mod. B or Schaeffler (indigenous) NJ1044.566185+HJ1044 or SKF (indigenous) NJ1044 MP/C4VA327/45+HJ 1044/VA 335/45 for suspension tube of WAP7/WAG9 locomotives

Sealed Lavatory Window Glass Unit for AC coaches to RCF Drg. No. CC55101 Alt. f and RDSO Spec. No. C - K404 (Rev. 1) with Corrigendum No. 1 of March 2009.

WORM DRIVE HOSE CLAMP SIZE- 80 MM TO IS: 4762-2002 TABLE-1. (REAFFIRMED 2021).

Lavatory Pan Orient type for LHB coaches to Drg.No.LE63202, Alt 'd'

HRC fuse link 16 Amps

Densified thermal bonded polyester blocks for single seat backrest size 50x595x962 mm for sleeper class coaches as per ICF Drg. No- ICF/SK 3-6-1-097, Alt-Nil/0, Item- 4, conforming to RDSO Spec. No. CK-607 (Rev. 2 of Dec. 2015 with Amndt. 01 of Aug16.). (Drg. Ref. is only for size & shape the cushion).

Circuit Breaker. 16A, 3 Pole AC 3-ph loco Ref. Part No.- CMC QX3-AH8569- 16A/ S803X-16-AH8569, CLW Drg. No.- CLW/ES/3/0096 with latest Alteration. Type- type 14. CLW Specn No- CLW/ES/3/0096 Alt-L with latest Alteration CLW Specn No- CLW/ES/3/0096 Alt-L with latest Alteration, Ref Type-CMC QX3-AH8569-16A/ S803X-16-AH8569 and ABB ID No-HBTB585552R3033

LEAD ACID BATTERY 12 V, 180 AH, MAINTENANCE FREE ( As per Specification attached)

Bolt with nut size 16 x 55 mm complete assembly for draw hook beam

LED pit light 21W

Chlorine filter (RH) and (LH) for LHB Coaches .

Converter On/ Off rotary used in LHB

JOINT CHEVRON

BRAKE CYLINDER 300 MM

RADIATOR CORE FOR 1400 HP DEMU/DPC. DRG. COMPATIBLE FOR DEMU /DPC AND COMPLETE REPLACEMENT OF CIL. PT. NO. 4968230

Hot dip galvanized bolt

Catenary large suspension bracket

Supply of 6Amps 1 way modular switch

HIGH PRESSURE DISCHARGE VALVE ASSLY. for GD make Water Cooled Air Compressor to GD Pt. No. 301WLN307/EMD Pt. No. 8424969.

Hydraulic Nut Splitter Cutting Tool etc

FIRE BARRIER WATER TIGHT TAPE THICKNESS 1.5MM, WIDTH 100 MM, SINGLE SIDED SELF ADHESIVE PROTECTED BY REINFORCED ALUMINUM FOIL WITH OPERATING TEMPERATURE -40C TO 120C.

STAINLESS STEEL FULL THREAD HEXAGONAL HEAD BOLT SIZE:-10X40MM, WITH 01 NOS. NUT, 02 NOS. FLAT WASHER AND 01 NOS. SPRING WASHER, GRADE-304.

LED LIGHT FITTING FOR SLR COACHES (9 WATT)

Supply of Roller Blind for Vande Bharat.

HYDRAULIC MOTOR FOR 700 HP DRG NO CILPT. NO 3230038 OR BOSCH RAXROTH PT NO A2FM 12/16 WVPB-040 OR EQUIVALENT

Slotted raised countersunk

Fcream contains - Ketoconazole 2 % w/w packing upto 20 gm

SYP LACOSAMIDE 15 MG/ML 200 ML

Snack table for LHB type coaches.

Procurement of POH KIT FOR MAGNET VALVE WITH INTERMEDIATE PLATE, etc.

Earthing Switch for VCB as per CLW Spec. No.-CLW/ES/3/0010( Alt.-D) (ABB Document No.-HSBA 031197-R0001).

MASTER CONTROLLER

Brake head fabricated

Complete seal kit with O-Ring etc.

PISTON SCREW, Equivalent to Plasser Part [PISTON SCREW, Equivalent to Plasser Part No.: 2E36.48 as per RDSO Drawing No.: TM/0425 Rev-2 and Specification No.: TM/HM/6/161 for CSM, DUO, MFI machine. Part Make: PLASSER OR EQUIVALENT. NOTE: Material supplied by firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully.]

FILTER CARTRIDGE (SUCTION FILTER), Equiv [FILTER CARTRIDGE (SUCTION FILTER), Equivalent to Part No.: 40102854, SUB: 40091492, SUB: SE460.130.ES, Filtrec Part No.: WT284 for PCTM, MPT machine. Make: CRCC/DONALDSON/FLEETGUARD/HYDAC/HYDROLINE/FILTREC. NOTE: Material supplied by firm should be fitted on machine without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. NOTE: Authorized dealer certificate to be submitted with supply. ]