Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.1 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹43.9 L+₹1.8 L (4.20%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹44.3 L+₹2.1 L (5.06%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹44.5 L+₹2.3 L (5.44%)Rejected-Finance RANGAPAHAR RAILWAY CROSSING GATE NO 1 DIMAPUR 797112 NAGALAND | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹45.0 L+₹2.9 L (6.79%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
6 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS C/o 99 APO Pin-913869
SPL REPAIR TO KOUBRU DWAR, BLDG NO T-127 AND T-432 AND PROVN OF PATH FROM BLDG NO T-390 TO BLDG NO T-751, BLDG NO T-444 TO T-949 AND BLDG NO T-211 TO BLDG NO T-94 AT LEIMAKHONG MIL STN
2022_MES_564572_2
8445/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹80,000
Yes
22 Mar 2023
22 Dec 2022
7 Jan 2023
22 Dec 2022
6 Jan 2023
30 Dec 2022
Amount
Schedule 'A'
Demolition of cement concrete (reinforced) of any descrption and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.
Dismantling water tanks capacity exc. 500 litres and n.exc. 1000 liters and removing to store complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc complete all as directed.
M & L for reinforced cement concrete (nominal mix) M-15 B1 (20 mm graded aggregates) for columns/pillars complete all as specified and directed (Note:- Reinforcement and form work required shall be measured)
M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions to rough finished surfaces of concrete complete all as specified and directed
M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finised surface of concrete complete all as specified and directed
M&L for RCC M-15 B1 (nominal mix) using 20 mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels and the like over 1.5m span complete all as specified and directed. (Note:- Reinforcement and form work required shall be measured)
M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Ditto all as per Item No 14 here-in-above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.
S & F automatic boom barrier 4 mtr length , fixed in position complete all accessories with night light reflector strips on beam , outdoor type easy to operate with remote key and manually both complete all as speicfied and directed
S & F flat iron for wind ties for roof including securing bolts complete all as specified
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.complete all as specified and as directed.
S & F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections confirming to 410-w (Gde -E-250 quality) complete all as specified and directedx
M&L for structural steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.
S & F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc .Fe 410-gde -E250 quality-A complete all as specified and directed
M&L for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe- 290 (Gde E- 165) complete all as specified and directed.
M&L for MS works as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for prepraration of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S & F for Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc.complete all as specified and as directed.
S & F 0.56mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed
M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry with grey cement and pigment in floors to match over 15 mm thick screed be in CM 1:4 complete all as specified and directed.
S&F 350 x 250 x 7 mm / 450 X 350 X 7mm thick coloured glazed ceramic tiles in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.
M&L for joint free coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for joint free coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
All as per Ser No 33 above including 10 mm thick rendering in CM 1:4 as in skirtings, dados and risers to steps etc complete all as specified and directed
M & L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of ties over 15 mm thick screed bed in C:M 1:6 complete all as specified and directed.
M & L for rendering 10 mm thick on fair faces of concrete work in CM 1 :4 finished the surface rough to receive tiles etc complete all as specified and directed
S&F 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete complete all as specified and directed.
M & L for making holes drilled dia exc 12 mm and n exc 25 mm depth of holes exc 25 mm but not exc 40 mm including holes for nails or screws , hand punched through granite stone complete all as specified and directed
S& F in reapir ABS plastic Speed breaker is designed to dynamically and compact that it can bear maximium load of it. The body of the breaker is made of ABC material. Two highly reflective reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and then fixed on to the speed breaker so thatr dust and water cannot touch reflectors inside and thus it maintain its reflectivity for a long time DA - 1005 (3650x50x250)
M & L for providing and fixing stainless steel (Grade 304)railing made of hollow tubes, channels, plates etc including wedling, grinding, polishing, buffing and making bolts complete including fixing the railing with necessary accessories & stainless steel dash fasteneres, stainless steel bolts etc. of required size on the top floor or the side of waist with suitable arrangement complete all as specified and directed
Holes for nails and screws hand punched through iron or mild steel (0.63 to 1.60 mm thickness holes are reamered complete all as specified and directed
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but n exc 4 sqm and removing all unserviceable materials from site complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each and removing all unserviceable materials from site complete all as specified and directed.
S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 100mm long butt hinges medium weight cold rolled mild steel for PVC door complete all as specified and directed.
S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 150mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
S&F 200mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
S&F 100mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed.
M&L rendering 15mm thick on other than fair faces of brick work in cement mortar(1:4) using water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. (Note: Plastering shall be carried out using Dimapur Sand. Note: WPC will be measured and paid separately)
M&L for preparation newly plastered wall surfaces and applying two coats of oil bound distemper over 3 mm thick birla wall putty complete all as specified
M & L for preparation of old treated surface of wall by wasing rubbing down & applying two coat of oil bound distemper complete all as specified and directed
Demolition of cement concrete of any descrption and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundations and filling complete all as specified and directed.
M&L for 75mm thick PCC type D-2 1:4:8 (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M & L 25 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in flooring finished rough to receive tiles complete all as specified and directed
Taking down GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Taking down GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 15mm dia galvanised pipes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 20mm dia galvanised pipes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S & F in repair bib tab 15 mm dia standared of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15 mm 90 gms) complete all as specified and directed
S&F in repair stop valve cast copper chromium plated screwed down high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified and directed
S & F and repair brass chromium plated shower rose 125mm size swivel type with connecting rod 15 mm bore complete all as specified and directed
S & F Vitreous wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.
S & F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed
S&F vitreous china wash basin white, flat back of size 450x300mm including 32mm dia PVC waste pipe CP brass waste coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete all as specified and directed.
S & F 10 Ltr PVC flushing cistern , low level, white with inlet , ball, valve , float and handle including brackets , flush pipe complete all as specified and directed
S & F PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed
S&F rotational moulded polyethylene water storage tank 1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed.
S&F 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F 20mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F pillar taps(ISI marked) , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for 15mm dia iron pipes and fixed complete all as specified and directed.
M & L fair cutting straight or racking cutting n exc 10 cm width or girth on exposed surfaces of brickwork such as in splays , chamfers etc including rubbed finish and waste complete all as specified and directed
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soft/loose soil complete all as specified and as directed.
Removing excavated material/soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for internal dia of pipe 150mm complete all as specified and directed.
Taking down eaves gutters and rainwater pipes(any shape or pattern) including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal of store (measured over all as fixed along the centre line over fittings and accessories) complete all as specified and directed
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints to wall or laid in trenches or in floors with steel clamps complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints to wall or laid in trenches or in floors with steel clamps complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends complete all as specified and directed.
S&F 110mm bore PVC (SWR) junction single, (Single T) with access door equal or unequal complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single, (Single T) with access door equal or unequal complete all as specified and directed.
S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed.
S&F 110mm bore PVC (SWR) reducers complete all as specified and directed.
M&L for PVC (SWR) vent cowl of bore 75mm complete all as specified and directed.
S&F PVC (SWR) WC connector with lip ring 110 mm. complete all as specified and directed.
M& L for sand cushioning layer under the floors and hand level surface includuing watering and consolidation to receive floor tiles complete all as specified and directed
M & L for machine pressed precast conctete interlocking paver block vibro compacted rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigment including cement concrete rounded or chamfered on edges complete all as specified and directed.
M & L PCC 1:2:4 type B1 (20 mm graded aggregate ) in mud stops rounded or chamfered on edges complete all as specified and directed
S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.
S & F 4mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work in walls complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, in unframed work and in any position complete all as directed.
M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed.
M & L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and directed.
M&L for prepraration of new or previously untreated surfaces of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
M & L for 30 mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and directed
S & F 25 mm thick 2nd class HQ glazed skeleton shutters open rebated and prepared to receive glass gazed etc but divided into squares with plain chamfered or rounded mitred and rebated sash bar any numbers edges of framing plain chamfered or rounded fitted with cut and mittered beads for securing glass guage etc size of members as specified in SSR Pt -I section 8 clause 8.24 (a) fitted to chowkhats
S& F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed
S & F mild steel flat iron as in hold fast including screwing or welding complete all as specified and directed
M&L for cement concrete 1:3:6 using 20mm graded stone agg as in hold fast etc. complete all as specified & directed.
S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed.
S&F 100mm long alumiunium handles cast type anodised complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.
S & F floor door stopper of aluminium alloy body and toung with hard drawn steel spring with 140 mm over all length of cover plate complete all as specified and as directed.
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified nd directed
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.
M&L brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
all as per item No 119 here -in-above but except materials
M & L for rendering 15 mm thick in CM 1:6 on fair surfaces of brick work or concrete surfaces finished even and smooth complete all as specified and directed (a) use of Dimapur Sand to plaster
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.
Supply of Integral water proofing Compound ISI marked complete all as specified and directed.
M&L for preparation of surfaces plastered or unplastered new surface and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed
Dismantling plain or corrugalated stell sheeting , any guage , thickness , including Nainital or similar pattern roof covering complete all as specified and directed
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip, straight flashing etc fixed with self tapping screws as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.
M&L for 75mm thick PCC type C2 1:3:6 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.
M&L 25mm thick cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregateas in floor, finishes even and fair to receive floor tiles complete all as specified and directed.
M & L for 15mm thick screed bed or bedding layer in cement mortar (1:4) for laying floor tiles etc complete all as specified and directed.
M & L for RCC nominal mix 1:2:4 Type ( using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; basesfor columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed.
S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, wall cladding and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
S & F harrison rail ,mild steel ,chromium plated with fixing brackets,stops,rollers etc. complete all as specified and directed.
Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) (a) One light point controlled by one, one way switch
(b) One ceiling/exhaust fan point controlled by one, one way switch complete all as specified and directed.
(c) One socket outlet 5 Amps 5 pin on independent board
(d) One socket outlet 5 Amps 5 pin on samet board
All as per item No 141 here in above but with cable size 2.5 sqmm for one 5 pin 15 Amps socket outlet on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm complete all as specified and directed
S&F modular switch 6 Amps, single pole, one way one module complete all as specified and directed.
S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.
S&F modular socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed.
S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.
S&F modular switch, 16 Amps, one module, one way complete all as specified and directed.
S&F modular white cover with frame for fixing of 8 module.
S&F modular white cover with frame for fixing of 6 module.
S&F modular white cover with frame for fixing of 3 module.
S&F modular white cover with frame for fixing of 1 module.
S&F blank speacer plate for single module.complete all as specified and directed.
Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S & F MCB SPN 40 Amps 240 Volts 10 KA rating complete all as specified and directed
S & F MCB SP 06 to 32 Amps 240 Volts 10 KA rating complete all as specified and directed
S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed.
Taking down/dismantling of old light fittings any type complete all as specified and directed
S & F LED tube light fitting 20 W LED 6500 K basic all purpose surface and wall mounted LED robust and high performance batten LED luminar comprises of extruded channel in thermally conductive material glare and smooth lightwith complete all as specified and directed
M&L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent/Angle type including lamp complete all as specified and directed.
Taking down old unservicebale service cable from and including battens /suspending wires complete all as specified and directed
S & F service wire PVC insulated and PVC sheathed stranded Aluminium conductor 10 Sqmm 2 core flat fixed to walls or suspended by insulting hanger not more than one meter apart including 4 mm dia GI suspension wire and binding with 2mm dia new GI wire with reel insulator complete all as specified and directed
M & L Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: (a) Earth strip beyond 7.5 m length will be measured & paid separately) (b) One testing after completion if the desired resistance is not obtained the Contractor shall redo the earthing without any extra cost to the department)
Taking down carefully Ceiling/Exhaust fan any size from its original position and to depsoit in MES store yard complete all as specified and directed.
Hanging only ceiling fan (MD supply) /wall fan and connecting up ceiling rose or connecting to fan all as specified and directed
Fixing only exhaust fan (M.D supply) / and connecting up ceiling rose of connecting to fan and making a whole cutting on the wall for fixing exhaust fann all as speicified and directed
S & F modular fan step regulator , 120 watt, 2 module complete all as specified and directed
S&F building security light fitting new generation energy saving & environmental friendly long life versatile pressure dia cast aluminium IP-66 high power LED light 20 Watt complete with fixing arrangement including bracket etc complete all as specified and directed.
S & F new generation , LED decorative post top 40 watt for 360 degree direct light with IP-65 protection resistant to impact and corrison glare free better uniformity including connection with twin core twisted flexible copper conductor cable complete all as specified and directed.
S & F LED flood light 100 W made up of pressure die cast aluminium housing with thoughned glass and high power LEDs and secondary lenses with IP-66 protection complete including connecting and testing all as specified and directed.
SHARMA ENTERPRISE
M/S PRADEEP CONSTRUCTION
MAURYA CONSTRUCTIONS
M/S BIJOYA LAXMI ENTERPRISE
M/S N JADUMANI SINGH
M/s Ritz Marketing
APPLE CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .