Repairs to Cantt Fund Buildings

Amount

Excavation in trenches (Soft soil) n.exc 1.5m wide & 1.5m deep and getting out

Providing cement concrete 1:5:10 with 40mm graded aggregate as in foundation, filling & mass

M&L- Brick work with cement mortar 1:6 using first class well burnt bricks

M&L- Form work to soffits of suspended slab such as roof slabs, floor slabs,landings & similar work (horizontal and sloping)

Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railing, openings in concrete walls, floor and roofs

Providing mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire

Providing reinforcement cement concrete 1:2:4 using 12.5mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves

Providing precast cement concrete in door lintels with cement concrete 1:2:4, 20mm graded aggregate

Rendering 12.5mm thick cement plaster as in cm 1:4 on fair faces of brick work or concrete surfaces and smooth without using extra cement

Rendering 12.5mm thick cement plaster as in cm 1:4 on fair faces of brick work or concrete surfaces with finished even and smooth

Providing: framed work such as grills, grantings, etc. with ends of bars shouldered for Man Hole covers

Providing cement concrete 1:2:4 over 12.5mm graded in floor 40mm thick

M&L- viterified tiles on floor over screed 20mm 1:4

M&L- Glazed ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement

M&L- 40mm thick brick tiles laid on mud mortar and joints grounted flush in cement mortar (1:3) mixed with 5% of cude oil by weight of cement on mud phuska & 80mm thick average consolidated thickness, mud, phuska on flat roofs including 25mm thick mud plaster and 3mm thick leeping plaster

M&L- Earth filling including spreading, leveling and well ramming & lead upto 10Km

M&L- Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixid

M&L- Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

M&L- Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, 35mm thick

Preparing plastic emulsion paint with 2 coats at surface of any description

Painting 2 coats over a coat of primer

M&L- One light point or one fan point controlled by one switch with cables 1.5 sq mm size & switch piano flush type single pole, one way 5Amp

M&L- Butt Hinges medium weight, cold rolled mild steel and fixed 4"

M&L- Butt Hinges medium weight, cold rolled mild steel and fixed 3"

M&L- Aluminium Anodised barrel Tower bolt 6"

M&L- Aluminum Handle Cast type anodised 4" size

M&L- MS Sliding door bolt, plate type, stove enamelled blackw with bright bolt 300mm size

M&L- Glass panes 3mm thick ISI Mark

M&L- WC seat ISI Mark vitrous china squating pan or pattern long pan size 580mm white with P or S trap etc.

M&L - WC seat english complete ISI Mark

M&L - WC seat orrisa type complete ISI Mark vitrous china squating pan orrisa pattern with integral size 580 x 440 mm white etc.

M&L- WHB wash basin ISI Mark

M&L- Urinal Bowl ISI Mark vitrous china bowl urinal flat back size of 465 x 355 x 265 mm white with gratting and union for discharge pipe etc.

M&L - PVC tank 500 ltr ISI Mark

M&L- PVC rain water (SWR) pipe 4" ISI Mark

M&L- GI pipe 20mm dia medium grade laid in floors ISI Mark

M&L- GI pipe 12.5mm med ISI Mark

Providing snow cem cement paint 2 coats (using good quality snow cem to be approved by EIC)

Providing distemper 2 coat (using good quality to be approved by EIC)

Providing interlocking tiles 60mm thick ISI Mark

Providing PVC shutters (using good quality to be approved by EIC)

Providing PVC chowkat (using good quality to be approved by EIC)

PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

Vee Vee Enterprises