Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.4 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹26.5 L+₹1.7 L (6.93%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹26.5 L+₹1.8 L (7.12%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹26.8 L+₹2.0 L (8.08%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹27.1 L+₹2.3 L (9.27%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
10 Jun 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER GOMANTAK
GARRISON ENGINEER GOMANTAK PIN 403802
Repair to Joinery Rolling Shutters and Railing including aluminum joinery under AGE BR II in GE Gomantak
2023_MES_598072_1
8547/E8
Open Tender
Support/Maintenance Service
Item Rate
270 days
VASCO DA GAMA
As per tender documents
8 documents required · 8 mandatory
₹500
GE GOMANTAK
₹50,000
Yes
7 Aug 2023
24 May 2023
12 Jun 2023
24 May 2023
10 Jun 2023
5 Jun 2023
Amount
Taking down wooden Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified.
S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed .
S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and as directed by GE/Engineer-in-Charge.
Taking down wooden Chowkhats or frames exc. 1.5 sq.m and n.exc 4.0 sqm each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified.
Taking down wooden shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.
S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as per specified and as directed by Engineer-in-charge.
S & F 2nd class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified.
S&F factory made 2nd class H/W 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
S&F 2nd class H/W 35 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked).
S & F butt hinges medium weight cold rolled mild steel 100 mm long (isi marked)
S & F 150 mm long Aluminium handles, cast type (ISI marked).
Supplying 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.
Supply and fixing of mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed
S&F for hold fast made out of 25x3 mm MS flat iron.
M&L PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in coping, bed plate etc complete.
M&L forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and plastring to match existing work in cement mortar 1:6 etc. complete.
M&L for one coat of alkali resistant primer on plastered surfaces over 3mm thick Birla white wall care putty and applying two coat of oil bond distemper and preparation the surfaces complete all as specified and directed
Supply and fixing in repair of mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed
M & L in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm mm complete all as specified and directed.
Taking down,easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws,etc and refixing in same opening , shutters of any description exc 1 sqm and n exc 2 sqm each Shutters of any description all as specified and directed.
S&F in repair aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked).
S & F in repair butt hinges medium weight cold rolled mild steel 100 mm long (isi marked)
S & F in repairt 150 mm long Aluminium handles, cast type (ISI marked).
S& F in repair 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed in repair complete.
M&L two coats of synthetic enemel paint on new wooden surface over a coat of pink primer incl necessery preparation.
S&F aluminium powder coated frame and shutters for patition / windows/ ventilators/doors sliding/fixed/openable type complete with necessary fittings such hinges, as two aluminium handle cum lock for each window, stopper hooks,roller etc and fixing all as speciefied and directed by Engineer-in-Charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation,etc) or insulation board/Slabs/blankets of any thickness including cover fillets, complete all as specified and as directed by Engineer-in-charge.
M&L 12 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs
M&L for 4mm Non thick Asbestos fiber Cement building board / E-board for ceilling incl powder coated GI frame (snapgrid) of standard section as per manufacturers instructions with the 2mm thick GI suspender in ceiling complete all as spd.
Hacking out old broken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads upto 1.5 sqm complete all as specified.
S& F Sheet glass 4mm thickness, ordinary quality and glazing with oil putty /rubber beading all as specified and directed.
S&F figured glass 4mm thickness, ordinary quality and glazing with oil putty /rubber beading all as specified and directed.
S&F aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick in doors / aluminium window shutters rate incl all fitting arregement.
S&F in repair aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick in doors / aluminium window shutters rate including removal of aluminium grills aluminium window shutters and refixing them in position after fixing of wiremesh.
Dismantling wrought iron or mild steel work of any description not otherwise provided
S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 fixed with fasteners.
M&L for Plain,mild steel sheeting in stepped flashings sheet 1mm thick having tensile strength of 550 Mpa as in garrage/roof covering/cladding to wall fixed ith grade of zinc coating 275 in repair with self tapping screw and fixed properly with angles complete all as specified and directed by Engr-in-Charge.
S & F Steel rolling shutters with 1.00mm thick laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified & directed
M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified.
M&L ( in repairs) 18 mm thick Prelaminated particle board, interior grade, type-II, prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws as in shutters of Cup Boards complete with Wooden beads of size 18mmx6mm around edges and its varnishing / french polishing as directed.and specified.
S&F continuous ( piano) hinges, mild steel , bright finish or electrigalvanised width of flaps (when opened) 30 mm complete all as specified.
S&F 75 mm size Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws in repairs complete all as specified.
S & F 100 mm long Aluminium handles, cast type (ISI marked).
S&F pvc door bottom weather strip door brush sweep seal fixed complete all as specified and directed.
JINTECH
KIRAN TRADERS
Paulraj Painters And Civil Engineering Contractors
CVS CONSTRUCTIONS
K M SUBHANAIAH
SACHIN CONSTRUCTIONS
AATREYA CONSTRUCTION
Super Construction
SHIVRAJ CONSTRUCTIONS
M/S Kartik Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .