Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 5 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
11 Dec 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Mechanical and Hospital Divisio
Executive Engineer Mechanical and Hospital Division Doda
Construction of Pre-Fabricated Hut with Toilet at Paddar for Sheep Husbandry Department Jammu
2023_PWDJK_236126_3
MHDD/TS/2023-24/39
Open Tender
Metal Fabrication
Turn-key
30 days
Padder
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
xen Mech and Hospital Division Doda
₹20,000
Yes
16 Dec 2023
5 Dec 2023
11 Dec 2023
5 Dec 2023
11 Dec 2023
5 Dec 2023
Amount
Detail of Scope of Work can be had from SBD of the e-NIT
Site Preparation Earthwork in excavation by manual means over area for leveling purpose including disposal of excavated earth up to 50m from cutting edge and should be disposed in near-by all kind of soil Foundation for plinth work = 72’-0”-0” x 1’-6” x 1’-6’ ’= 162ft3 Foundation for columns = 8 x (2’ x 2’ x 3’-0”) = 96 035955ft3 Foundation for plinth protection = 84’-0” x 1’-6” x 0’-6” = 63 ft3 Total = 321 ft3 = 9.08 m3 Area to be excavated keeping in view the earth quake resistance for which a ms mesh (10 mm) is to be provided in the base foundation of the plinth
Providing and laying of cement concrete (1:5:10) using 40mm nominal size nallah stone. Plinth work = 72’-0” x 1’-6” x 0’-6’’= 54 ft3 Flooring=20’-0” x 16’-0” x 0’-3’’= 80 ft3 Foundation for columns = 8 x (2’ x 2’ x 6”) = 16 ft3 Plinth Protection=84’-0” x 1’-6” x 0’-6” = 63 ft3 Total = 213 ft3 = 6.02m3
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (one cement: Two coarse sand: Four Graded stone aggregate 20 mm nominal in size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars for Plinth beam
Centering and shuttering including strutting, propping etc. and removal of form work for: 4.6.1 Foundations, footings, bases for columns
12 mm cement plaster to plinth wall of mix 1 : 3 (1 cement : 3 fine sand) Area = (72’-0” x 2’-0”) = 144 ft2 = 13.38 m2. Total = 13.38 m2
Steel work welded in built up section/ framed work including cutting, hosting, applying a priming coat using structural steel. In gratings, frames, guard bard, ladders, railings etc. trusses including primer and enamel paint including nut bolts, kingpost, struts etc.
Supply and installation at site of Prefabricated PUF (Poly-Urethane Foam) Panels of size 60 mm thick Fire proof Panels for walls (PPGI finish on both sides) and 70 /100 mm thick Color Coated Corrugated PPGI sheet for Roof to make a closed structure on the outer frame including doors and windows. Prefabricated Sandwich PUF panels with Cam toggle type fasteners fitted and self-locking PVC gaskets fitted on all sides of wall and ceiling/roof including rivets, Silicones, Anchor fastener, self drilling screw and all other allied accessories required for the installation/erection of PUF panels. a. Wall to wall cam locking system. Internal/External flashing to be provided. Job includes Cladding on all walls including sunshade on all windows and outer doors.
Fabrication, Providing and Fitting of Aluminum doors, windows and ventilators with frame made out of Powdered coated aluminum of gauge not more than 12 mm including glass, rubber beading, aluminum Fly mesh, aluminum sheet panels for doors and other allied accessories. The total no. quantity of doors and windows are enclosed as per Annexure “A”.
Tiles Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)I including grouting the joints with white cement and matching pigments etc. complete. (Size-600x600mm) Floor area = (20’-0” x 16’-0”) = 320 ft2 = 29.74 m2
False Ceiling Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminum primer on both sides & edges, inclu+ding two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodized aluminum (with 15 micron anodic coating) T- sections35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia. M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of primer and paint as per Direction of Engineer In charge. Roof area = (20’-0” x 16’-0”) = 320 ft2 = 29.74 m2
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single Socketed pipes 110 mm dia Length of pipe = 88 ft = 26.82 mtr
Providing and fitting of following sanitary items in one no. bathroom and Kitchen to make them fully functional. Job includes P/F of 1 no. English Seat with all accessories, 1 no. urinal pot with all accessories, 1 no. wash basin of size not less than 18” with all accessories, 1 no. steel sink of size 24 “, 1 no. looking mirror of appropriate size, 2 nos Towel rods, Soap holders, Bib cocks, pillar cock, angle valves, PVC pipe waste pipe, Pvc connections and all other accessories. Providing and laying underground PVC pipe of size 150 mm of reputed make for sewage from bathroom to soakage pit and 75 mm PVC pipe for urinal, wash basin and kitchen sink. Providing and laying of CPVC pipe of size 50 mm and 25 mm for water supply to the bathroom and Kitchen from main source along with all allied fitting and accessories. Job also includes construction of main holes, PVC cover at the top of the main/check hole, cement circular soakage septic tank of size 3ft dia and depth of 8ft with lid and cover, fitting of gas pipe along with connections with the bathroom to make bathroom fully functional with all other allied accessories.
Making Soakage pit 2.5 mtr diameter 3 mtr deep with 45x45cm dry brick honey comb shaft with carbon burnt clay non-modular bricks of class designation 7.5 bricks and SW drain pipe 100mm pipe, 1.8mtr long. Complete as per standard design
P/F of 2 nos P.V.C water storage tank of capacities 1000 ltrs and 500 ltrs along with all allied accessories and connections. The 500 ltrs tank should be placed on a platform made out of rectangular section MS pipe of size 60 mm X 40 mm of thickness not less than 3.6 mm. The height of the fabricated platform should not be less than 10 feet from ground level. The 1000 ltrs tank should be placed on a PCC Platform made on the ground level. Job also includes providing and fitting of 0.5 HP mono block pump for lifting the water with all allied accessories and fittings. The job is inclusive of all material cost, labour cost and taxes.
Electrification of the facilitation center by way of Providing and fitting of 10 nos. round recess/ surface 20 watt LEDs, 6 nos 4 feet LED tube lights, 2 nos ceiling fans with regulator of 1200 mm sweep, 2 nos exhaust fans of 12” dia with lovers, 100 W LED Flood Light. Providing and fitting of 1 no. distribution panel consisting of MCCBs, MCBs, SPN for different circuits. Providing and laying of main service line of size 16 sq. mm from main pole to MCB/distribution box and 1 mm sq. mm, 1.5 mm sq mm. 2.5 sq.mm pvc wire, 4 mm pvc wire for different power circuits. P/F of modular switches, sockets, conduits of different per site requirement. The job includes material cost ,labour cost and taxes
M/S A.S.I ENTERPRISE
Manoj kumar contractor
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .