MP1/ID7 AND PUMP HOUSE/YARD/CMSRU

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil ,backfilling the same soil or disposal of surplus excavated soil as directed.Rate is inclusive of demolishing bituminous surface/ concrete/ rubble/ solingstone etc if any.complete.

Providing and laying plain cement concrete 1:4:8 using 40mm down graded IS nominal size hard broken metal including cost and conveyance of all materials,labour for mixing, laying, consolidating curing as per IS.456 etc.complete but excluding cost of cement and cost of formwork.

Providing and laying reinforced cement concrete 1:2:4 using 20mm down graded broken granite metal in ground floor upto 5m height including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing,cost of dewatering etc.complete but excluding cost of cement,cost of formwork and cost of reinforcement.

Reinforcement for RCC work including cost and conveyance of all materials, labour for, uncoiling ,straightening, cutting,bending, laying & tying with 22G binding wire etc.complete but excluding cost of steel (mild steel or tor steel) but including cost of binding wire.

Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 from approved manufacturer in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) for all leads and lifts including cost and conveyance of all materials, labour, other incidentals like scaffolding, curing etc complete, excluding cost of cement.

Plastering with CM floated hard and trowelled smooth including cost and conveyance of all materials, labour, curing etc.complete as directed by the Engineer-in- charge but excluding cost of cement. 1:4, 12mm thk.(1cement : 4Fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting with primer of approved quality and shade after rubbing and cleaning the surface including cost and conveyance of all materials,labour, scaffolding other incidentals, curing (wherever required) etc.complete.One coat cement primer on plastered surface

One coat zinc chromite primer

Painting with ready mixed interior quality plastic emulsion paint of approved quality and colour after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour, scaffolding other incidentals etc. complete.One or more coats on old work

Painting with exterior quality Acrylic emulsion paint of premium quality and colour after rubbing and cleaning the surface using wire brush,sand paper etc. including cost and conveyance of all materials labour, scaffolding other incidentals etc. complete.Two or more coats on new surface

Painting with synthetic enamel paint of approved quality and colour after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour,scaffolding other incidentals etc. complete. One or more coat on old surface

Suppying and stacking at site OPC/PPC/PSC conforming to relevant IS.

Supplying and stacking at site TOR steel reinforcement bars of different diameters conforming to relevant IS1786 .

Providing and fixing/replacing on roofing/cladding at all heights, levels and locations Aluminium profile industrial troughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5x65 mm with EPDM seal complete upto required pitch in horizontal, vertical or curved surfaces i/c cutting to size and shape where required as per specifications and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for fixing and approved sealent where required etc. but excluding the cost of purlins, rafters and trusses.0.56 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm.

Fabrication & erection of Structural steel work, using Tees, angles, channels, plates,Tubes & Pipes purlins, rafters and trusses etc. at all heights, fixed with or without connecting plate, including cutting, bending/straightening, welding/ bolting, fabrication, erecting in position, aligning the erected structure, cost of all accessories, hire for tools and plants and applying a priming coat with zinc chromate primer after mechanical buffing, etc complete. all as directed by the Engineer-in-charge.(all miscellaneous items made of steel shall be measured in the same item) complete.Using Steel procured by the contractor

Dismantling A.C./G.I. corrugated sheets of roofing/cladding up to height of 5metres including conveying and stacking the dismantled materials at the places pointed out by the Engineer-in-charge.

Demolishing PCC/RCC work manually/ by mechanical means including separately removing and stacking the available reinforcement and clearing away the debris as per directed by EIC etc. complete.

Provision of Scaffolding for pump house AC/GI corrugated sheet disman ling work Note:safety net include for this work

arcoma