Repair Renovation of Residential Quarter of Honble DDC Chairperson and Vice Chairperson at Poonch

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand:6 graded stone aggregate 20 mm nominal size).

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class Kail wood

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622) of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand), including grouting the joints with white cement and matching pigment etc. complete size of tile 600x600mm

Providing and Fixing of PVC Laminates for PVC panelling of approved quality and make including cutting,hoisting & fixing in poistion etc including all necessary fixing accessories etc all complete job for walls & ceiling (NSI)

For Walls

For Ceiling

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chuna flushing cistern and CP flush bend with fittings and C.I.brackets 40mm flush bend, over flow arrangement with special of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets cutting and making good the walls wherever required: WC pan with ISI marked with solid plastic seat and lid .

Providing and fixing wash basin with C.I brackets,1.5mm C.P brass pillar taps,32mm C.P brass waste of standard pattern,including painting of fittings and brackets,cutting and making good the walls wherever required:White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P.brass pillar taps.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453 x 357mm (outer dimensions).

Providing and fixing PTMT waste coupling for wash basin and sink of approved quality and colour:Waste coupling 31mm of 79 mm length and 62mm breadth weighing not less than 45gms.

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing Stainless steel A ISI 304 (18/8) Kitchen sink as per I.S. 13983 with C.I.brackets and stainless steel plug 40mm.Including painting the fittings and brackets,cutting and making good the walls wherever required:Kitchen sink with drain board 510x1040mm bowl depth 225mm

Providing and fixing PTMT liquid soap container 109mm wide,125mm high and 112mm distance from wall of standard shape with brackets of the same material with snap fittings of approved quality and colour weighing not less than 105gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long , 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour , weighing not less than 88 gms

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long , 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour , weighing not less than 88 gms

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Wiring for light point/fan point/call bell point with 1.5 sqmm FRLS PVC inculated copper condactour single core cable in surface /recessed medium class PVC Conditue with modular switch ,modular plate ,suitable G.I box and earthing the point with 1.5 sqmm FRLS PVC inculated copper condactour single core cable etc as required

Group-B

Group-C

Wiring for circuit/ sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supply and Fixing of Led Panel Layout

Supply and Fixing of PVC MCB Box 4 Way

Supply and Fixing of 6Amp to 32 Amp MCB

Supply and Fixing of 63Amp SPN

Providing and Supply of Invertor with Two no Batterys of Havels (with 36 Months Replace Warranty)

Supply and Fixing of Geyser 50 Ltr Capacity (ISI Havells or any other ISI Brand)

PARMEET SINGH

Sajid Ali

ZAKIR HUSSAIN

Abdul Majid