CONSTRUCTION OF MARRIED ACCOMMODATION FOR ORs AT UDAIPUR MILITARY STN (JOB NO S/2973)

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.28

Lump sum price worked out by the contractor for "SITE CLEARANCE ,DEVELOPMENT, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.30

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.31

Lump sum price worked out by the contractor for "INTERNAL ELECTIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.33

Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.36

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.37

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No.39

Lump sum price worked out by the contractor for "BOUNDARY WALL, FENCING AND GATE" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 40

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.41

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.44

Lump sum price worked out by the contractor for "FIRE FIGHTING EQUIPMENT" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.46

Lump sum price worked out by the contractor for "LIGHTNING PROTECTION" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.47

Lump sum price worked out by the contractor for "RAIN WATER HARVESTING" as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.48

Lump sum price worked out by the contractor for "LIFTS" as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.49

Lump sum price worked out by the contractor for "ARBORICULTURE" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No.50

Sch 'A' PART-XVI (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL WATER SUPPLY S&F of brass CP sink mixer with swinging casted spout (wall mounted model) for mixing hot & cold water with connecting legs & wall flanges, complete all as specified and directed.

S&F of angle cock 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes or unions, complete all as specified and directed.

S&F of brass CP mixer for WBH for mixing hot & cold water screwed down for iron/CPVC pipe and fixed with connecting legs & wall flanges, complete all as specified and directed.

S&F of brass CP wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges complete all as secified and directed.

S&Fof CP hand shower (health faucet) with 1 meter long easy flex tube in chorme finish & wall hook, complete all as specified and directed.

S&F 15mm bore two way angle valves cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe or for union complete all as specified and directed.

INTERNAL ELECTRIFICATION S & F energy saving 9 Watt LED bulb input operating voltage range 100-270V AC, CCT-6500K, operating temprature -10 to 50 degree centigrade, PF more than 0.90, luminous flux equal/ greater than 460 lumens, CRI equal/ greater than 80, Base B22 all as specified and directed.

S & F wall mounted compact one piece, decorative LED tube light fitting 1x10w comprises of extruded channel in thermally conductive material, high translucent serrated milky white diffuser, input operating voltage range 120-270V, CCT-6500K, view angle 120(Min),operating temprature -10 to 50 degree centigrade, PF more than 0.90, luminous flux efficiency equal/ greater than 100 lumens per watt, CRI equal/ greater than 75,THD equal/ less than15%, free of glare along with integrated constant current SMPS based LED driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand two core 1.0 sqmm of suitable length from fitting to the ceiling rose crompton model LDL-10-NW or equivalent complete all as specifeid and directed.

S & F wall mounted decorative box type tube light fitting suitable for T8 tube , double side connection including LED polycarbonate tube T8, 1x20W, input operating voltage range 120-270V, CCT-6500K, view angle 120(Min),operating temprature -10 to 50 degree centigrade, PF more than 0.90, luminous flux efficiency equal/ greater than 120 lumens per watt, CRI equal/ greater than 75,THD equal/ less than15%,free of glare along with integrated driver with metal heat shrink complete and connecting to the point wiring with necessary flexible copper conductor of multistrand two core 1.0 sqmm of suitable length from fitting to the ceiling rose crompton model DMLN1LT8-16(Batten) & LT8-20-865-(2) or equivalent complete all as specified and directed.

M&L for LED security Light luminaire 25 watts, input operating voltage 120-270V, CRI - equal/greater than 70, CCT-6500K, PF more than 0.90,Luminous flux efficiency equal/ greater than 110 lumens per watt, IP 66 made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver upto 10KV surge protection fitted with adjustable pole adopter with suitable GI pipe bracket 25mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts all as specified and as directed crompton model LSTS-25-CDL-M or equivalent complete all as specified and directed.

S&F roundal surface mounting LED panel inection molded in thermally conductive engineered plastic-FR V0 grade housing, diffuser with high optically efficient material along with integrated driver complete LED light 10W and connecting to the point wiring with necessary flexible copper conductor of multistrand two core 1.0 sqmm of suitable length from fitting to the ceiling rose all as specified and as directed crompton model LCRP-10-CDL or equivalent complete all as specified and directed.

S & F bulk head LED fixture 10W, IP65, CCT-5700K,PF more than 0.90,Luminous flux efficiency equal/ greater than 100 lumens per watt giving glare free light and all as directed by Engg in charge crompton model LBHP-10-CDL or equivalent complete all as specifie and directed.

S&F ceiling fan of 1200mm sweep energy efficient, ISI Mark, super enamelled copper wound, class B insulation, rated power 50W+/- 10%,rated speed 350rpm+/-10%, power factor equal/ greater than 0.90, air delivery 226 CMPM,rated voltage 230V including down rod and connecting to the point wiring with necessary flexible copper conductor of multistrand three core PVC insulated unsheathed FRLS cable 1.5 sqmm of suitable length from fan to the ceiling rose complete as specified and directed.

S&F plastic body exhaust fan of 200mm sweep, energy efficient, super enamelled copper wound, class B insulation, rated power 32W +/- 10%,rated speed 1350 rpm +/- 10%, Temprature rise 75degree centigrade Max,power factor equal/ greater than 0.90, air delivery 520 CMH,rated voltage 220-240V with louver shutter including fixing/ grouting of frame in wall and cutting opening complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core PVC insulated unsheathed FRLS cable 1.5 sqmm of suitable length from fan to the ceiling rose complete as specified and directed.

S&F metallic body exhaust fan of 300mm sweep, energy efficient, super enamelled copper wound, class E insulation, rated power 55W +/- 10%,rated speed 900 rpm +/- 10%, Temprature rise 75degree centigrade Max,power factor equal/ greater than 0.90, air delivery 1275 CMH,rated voltage 220-240V with suitable size louver shutter including fixing/ grouting of frame in wall and cutting opening complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core PVC insulated unsheathed FRLS cable 1.5 sqmm of suitable length from fan to the ceiling rose Havells model No Turbo force HD or equivalent complete as specified and directed.

S&F geyser of capacity 50 Ltr, 5 Star rated,white in colour, IPX-4 protection, adjustable knob for temperature setting, 0.8 MPa high working pressure,plasto shield outer coating, incoloy glass coated heating element, Feroglas technology, PUF insulation, whirlflow technology including PVC connections and fixing on wall with grouting nut bolts etc Havells model No Monga DX or equivalent all as specified and directed.

S&F MCB Distribution board 2 way metal,concealed flush to wall for mounting MCBs, factory made, fabricated out of CRCA sheet not less than 1.20 mm thick. DBs shall be semi glossy finished with epoxy polester based powder paint process to ensure smooth finish and protection against corrosion atmosphere complete all as specified and directed .

S&F MCBs rated short-circuit breaking capacity, Icn 10kA, C curve, ISI/CE marked as per IS/IEC 60898 of the following type and rating all as specified and directed.

MCB SP 6 to 32A

MCB DP 40A

MCB SPN 40A

MCB SPN 10A

MCB TPN 63A

M & L for submain wiring with 4 runs of single core 10 sqmm PVC insulated unsheated multistranded FRLS 1100 volts grade with copper conductor drawn through 40 mm dia MS conduit and conduit accessories including one run of single core 10 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and as directed.

M&L for submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheated multistranded FRLS 1100 volts grade with copper conductor drawn through non-metalic rigid PVC conduit and conduit accessories not less than 25mm dia including one run of single core 6 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and as directed.

M&L for submain wiring with 2 runs of single core 2.5 sqmm PVC insulated unsheated multistranded FRLS 1100 volts grade with copper conductor drawn through non-metalic rigid PVC conduit and conduit accessories not less than 20 mm dia including one run of single core 2.5 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected all as specified and as directed.

M & L for TV coaxial socket outlet deluxe including pressed steel sunken box of suitable size with cover plate &TV cable drawing through 25 mm dia PVC conduit pipe complete all as specified and directed

Supply install, testing and commissioning of microprocessor based single phase single source tamper proof electronic smart prepaid energy meter, with provision of conversion into postpaid at the time of emergency, surface mount type and of rating 415Volts, 50Hz, of range 10-60 Amps, confirming to IS 16444(2015) with LED display and parameters like voltage, current, frequency, power, power factor, KWh/KVA, default/ inbuilt single source, inbuilt long range RF communication suitable for outdoor, suitable range data accumulator and also comatible for prepaid online engry monitoring/billing system, through remote software/ data export to ERP complete all as specified and as directed.

EXTERNAL WATER SUPPLY M&L for construction of stone masonry valve pit for Sluice valve all as specified and as per drawing including plastering, PCC in foundation, Excavation and earth work in any type of soil, MS sheet cover 3mm thick sheet with locking arrangement painted with two coat of anti corossive paint over one coats of zinc chrome primer of 900mm x 900mm x 600mm (type 'B').

Supply test & commissioning of pumping set, open well submersible pump set electric driven, 15HP, three phase, working for 50Hz AC supply and delivery dia 80mm delivery head upto 97mtr and discharge capacity minimum 450 LPM complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of plate not less than 1.5mtr below normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or stee all as shown in electrcal plate No 3 of SSR Part-I connected to continious earth wire or main switch board/ panel etc all as specified or indicated and testing on completion including provision of earth wire protection by 15mm dia, light grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI wire and protection pipe upto 7.5mtr complete all as specified and directed.

Supply and fix PVC insulated and sheated 1100 volts grade, submersible flat cable 3 core, multistranded, copper conductor of size 6.0 sqmm complete all as specified and directed.

S&F gun metal gate valves with iron wheel head, screwed both ends for iron pipe and fixed 80mm bore ISI marked complete all as specified and directed.

S&F gun metal reflux valves screwed both ends for iron pipe and fixed 80mm bore ISI marked complete all as specified and directed.

S&F cast Iron air valves with two air outlets, 50mm bore and fixing up in 80mm bore GI iron water supply mains complete all as specified and directed.

M&L for sand cushioning to PVC/XLPE cables with tibba sand and punning to provide required cover to UG cables complete all as specified and directed. Note: Punned down thickness shall only be measured and paid .

EXTERNAL ELECTRIFICATION M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5mtr below normal ground level connected to galvanized strip 32mm X 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to OH conductor on pole/ Panel/ main switch board etc all as specified or indicated and testing on completion including provision galvanized strip protected by 40 mm bore, light grade pipe and watering pipe shall be 20 mm bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI strip and protection pipe upto 7.5 mtr complete all as specified and directed.

Supply, install, testing and commissioning of electrical panel board (CPRI approved) outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materilised dust and vermin proof (protection class IP 54), made out of 3.15 mm thick MS sheet (CRCA) including hinged door both side opening with locking arrangement duly painted with coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer including suitable size required steel glands and carry out internal connection with suitable copper bus bar all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following:

Supply, install, testing and commissioning of electrical panel board (CPRI approved) outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materilised dust and vermin proof (protection class IP 54), made out of 3.15 mm thick MS sheet (CRCA) including hinged door both side opening with locking arrangement duly painted with coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer including suitable size required steel glands and carry out internal connection with suitable copper bus bar all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following:

Supply and install, testing and commissioning of Bus bar chamber of size 60 cm x 60cm x 40 cm outdoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 3.15mm thick MS sheet (CRCA) including factory made hinged type door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer including suitable size required steel glands and carry out internal connections with busbar complete all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following accessories;

Supply and install, testing and commissioning of Bus bar chamber of size 60 cm x 60cm x 40 cm indoor type suitable for LT 415 volts 3 phase 4 wire system factory made cubical complete materialised dust and vermin proof (protection class IP 54), made out of 2.00mm thick MS sheet (CRCA) including factory made hinged type door both side opening with locking arrangement duly painted with two coats of synthetic enamel paint with powder coated finish over a coat of zinc chrome primer including suitable size required steel glands and carry out internal connections with busbar complete all as specified and directed by Engineer-In-Charge. the panel board shall be comprising of the following accessories:

Supply and fixing of energy efficient street light fitting 60 watt LED with lense, compact street lights fitting with deep drawn MS housing complete with Acrylic cover incl provision of PVC insulated unsheated copper conductor single core cable 2.5 sqmm, 1.5 mtr long aprox for connection from OH line to fitting complete all as specified and directed.

S&F SMC junction box with bus bar with MCB of cap 20Amps 230 volts complete all as specified and directed.

ROAD, PATH & CULVERT M&L for WMM 15 cm thick in two layers of 7.5 cm thick (compacted thickness) with coarse aggregates of grading 2 (63 to 40mm size) spread rolled and consolidated to gradient materials and camber required with granite trap or ballast stone complete all as specified and directed.

BOUNDARY WALL, FENCING AND GATE M&L for laterite/sand stone masonry in squared rubble regular coursed well bonded bedded and solidedly hearted built in CM 1 : 6 as in walling complete all as specified and directed.

M&L for two coats of exterior emulsion weather coat over a coat of primer including preparation of plastered surface complete all as specified and directed.

SEWAGE DISPOSAL M&L for laterite stone masonry regular coursed well bonded bedded and solidly hearted built in cement mortar (1:4) complete all as specified and directed.

M&L for providing lowering, laying, aligning, fixing in position and joining at all level/depths full round HDPE DWC( Duble wall corrugated) 200mm dia pipes with required jointing accessories of SN8 grade as per IS 16098(Part 2) amended upto date in trenches in complete including all material, labour, sectional hydrotesting (including the cost and conveyance of water to site fortesting) and Commissioning as per Technical Specifications, drawings and as per direction of Engineer in charge.

FIRE FIGHTING EQUIPMENT S&F branch pipe with nozzle of 20 mm dia for hose reel conforming to IS 8090 complete all as specified and directed.

S&F 100 watt amplifier complete all as specified and directed.

S&F automatic air release valve 50mm bore suitable for domestic water with 50mm bore gun metal stop valve complete set complete all as specified and directed.

S&F water type extinguisher of 9kg capcity conforming to IS-15683 complete all as specified and directed.

S&F light weight squeeze grip type CO2 extinguisher of 3kg capcity conforming to IS-15683 complete all as specified and directed.

S&F dry powder (ABC) extinguisher of 9kg capcity conforming to IS-15683 complete all as specified and directed.

S&F mechanical foam extinguisher of 9 ltrs capcity conforming to IS-15683 complete all as specified and directed.

S&F fire buckets (dry sand) of 7kg capcity conforming to IS-15684 complete all as specified and directed.

DG SET Supply install, test & commissioning of silent diesel driven generating set 415 Volts, 3 PH 4 wire, 1500 rpm, 126 BHP, engine as per IS 10001/10002 and altemator as per IS 13364 complete with replay panel and switch gears for automatic starting on main failure control panel (AMF Panel) having meter and sound proof canopy as per CPCB norms and foundation etc of capacity upto 82.5 KVA for lifts in married Accn and fire fighting system.

RAIN WATER HARVESTING Trial bore of 250 mm dia up to 200 mtr depth below ground level in any kind of soil strata including hard stone / boulder incl elecrtric logging ,MS cap , MS flat iron clamp , reducing socket etc complete all as specified and directed.

Reaming up to 525 mm for 60 RM from ground level including MS casing pipe of 200 mm bore and thickness 8 mm and pea gravel complete all as specified and directed.

Supplying filling, spreading & levelling stone boulders of size range 5 cm to 20 cm in recharge pit in the required thickness, for all leads & lifts, complete all as specified and directed.

Supplying filling, spreading & levelling gravel of size range 5 mm to 10 mm in recharge pit over the exisiting layer of boulders in the required thickness, for all leads & lifts complete all as specified and directed.

Supplying filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit over the exisiting layer of gravel in the required thickness, for all leads & lifts complete all as specified and directed.

M&L for PVC SWR pipe single socketed in any length 160mm dia with rubber ring joints and laid in trenches complete all as specified and directed.

ARBORICULTURE M&L for earth filling in clayey soil brought from out side of defence land to form a landscap including levelling and dressing of soil complete.

M&L for providing ATT on top of soil complete on clayey soil complete all as specified and directed.

M&L for treating top surface with mixing of manure, neem cake etc complete all as specified and directed.

M&L for plantation of Neem tree with good earth, fertilizers, pesticides, watering complete of 1.00m height including excavation of suitable size pit (size of pit shall not less than 45cm dia & 60 cm deep) to accommodate the roots of plants including provision of good earth by treating with farm yard manure in the ration (4:1) fertilizers and pesticides (i.e. Bevaton and neem cake BHC 10% linson dust. Thimment or phorate, manures super and vermicompost) and making up the trench area to proper levels, for its growth complete all as specified and directed.

All as per Ser item No 80.00 hereinbefore but Shisham tree

All as per Ser item No 80.00 hereinbefore but Gulmohar tree

All as per Ser item No 80.00 hereinbefore but Pomogranate tree

All as per Ser item No 80.00 hereinbefore but Nimbu tree

All as per Ser item No 80.00 hereinbefore but Gauva tree

All as per Ser item No 80.00 hereinbefore but Ashoka tree

All as per Ser item No 80.00 hereinbefore but Fishtail palm tree

All as per Ser item No 80.00 hereinbefore but Areca palm tree

All as per Ser item No 80.00 hereinbefore but Bottle palm tree

All as per Ser item No 80.00 hereinbefore but Ficus Black/Golden/Benzaminal 1.00m height.

All as per Ser item No 80.00 hereinbefore but Ficus Panda Hedge 2 feet height

All as per Ser item No 80.00 hereinbefore but Anarmi Hedge 2 feet height

All as per Ser item No 80.00 hereinbefore but Hibiscus 2 feet height

All as per Ser item No 80.00 hereinbefore but Begun walia 2 feet height

All as per Ser item No 80.00 hereinbefore but Perrinial flowers ( Rose/ sada bahar/ champa/ chandani single/ chandani double/ 9'O clock/Kaner/ Sunder roopa / Raat ki rani) 2feet height

M&L for grassing the area grassing with cyndan dactylon (Calcutta grass 0 having rhizomes with sufficient nodes in row of 5cm apart in either direction & watering, mainatenance of the lawn till the grass forms a thick lawn free from weeds & fits for mowing incl spreading of good earth & compost complete all as specified and directed.

NOTE:- Grassing shall be carried out to carpeting effect on installation 80% of the ground should note be visible due to plant cover. If the desired effect is not obtained than additional grass will be planted at the speicfied location to achive the effect.

PHASE-II Outsourcing the one FGM as DG set operator cum lift rescue man per shift of 08 hours for three shifts round the clock for operation of one DG set (capacity- 82.5 KVA) and rescue the man from the any of three lifts (13 Passengers) in case of any lift becomes un-operational and as per indian electricity rules / Engineering practice and maintaining properly the installation, protective instruments complete in good condition and maintanance records, breakdown records for all as specified na das directed to the entire satisfaction of Engineer-in-charge.

NOTE:- for item No 97.00 (i) All three lifts and DG set are located in one comlex only. (ii) Contarctor shall submit ID proof, police verfication, Bank A/C deatils, Educational certificate to department and obtain approval from AGE(I) before employing person as a STP operator and helper . (iii) Payment shall be done by crossed cheque through aadhar linked bank account only and it shall not be less than minium fair wages as per act in vogue. The contractor shall submit proof of payment before claming payment. (iv) Contarctor has to submit proof of payment of ESI ( insurance ), EPF subscription made by him as applicable as per latest laws/acts before claming RAR. (v) Contarctor shall provide two set of uniform, shoes, safety belt, stationery, basic tools,log book to each employed person.

FRIZO INDIA PVT LTD

Dasmesh Buildcon

A S CONSTRUCTION COMPANY