Construction of KARGIL GIRLS Hostel at majeen Jammu

Amount

Earth work in excavation by mechanical means in foundation trenches or drain (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kind of soils.

Providing & Laying in position cement concrete 1:4:8 in stone aggregate 40mm excluding the cost of centering and shuttering . all works upto plinth level.incld. Carraige complete.

Providing & Laying in position cement concrete 1:3:6 in stone aggregate 20mm excluding the cost of centering and shuttering . all works upto plinth level.(stone crushed aggregate).incld. Carraige complete.

Reinforced cement concrete work in walls (any thickness) incluidng attached pilasters, buttresses,plinth,and string courses fillets columns, piers, abutments, pillars, posts, struts, etc, upto floor five level, excluding cost of centering shuttering and finishing. and reinforcement.1:1.5:3 (1 cement :1.5 coarse sand: 3 graded crushed stone aggregate 20mm nominal size) incld. carriage.

Reinforced cement concrete work in beams, suspended floors ,roofs having slope up to( 15 degree)landings ,balconies ,shelves ,chajjas,lintals bands ,plain windows sills ,stair cases and spiral stair cases up to floor five level excluding the cost of centering ,shuttering ,finishing and reinforcement with 1:1.5:3(1cement:1.5coarse sand :3graded stone agg.20mm nominal size.) crushed including carriage complete

centering and shuttering incld.strutting propping etc. and removal of from for

Foundations, footings, basis of columns etc. for mass concrete.

Column, lentel, beam and suspendid floor . .

Centering and shuttering including strutting, propping etc and removal of form work for edges of slab above 20 sqcm.

Brickwork with common burnt clay F.P.S brick of class designation 75 cement moretar 1:6 above plinth level upto floor level in all shapes and sizes..incld. Carraige complete.

Extra for brick work in surper structure above plinth level upto floor five level.(by manual means)

Half brick masonary with bricks of class designation 75 in foundation in plinth in 1:4 (1 cement :4 couse sand) include. carriage

Extra for half brick masonary in superstructure above plinth level upto floor five level

Reinforcement for RCC work including straightening, bending, cutting, placing in position and binding all complete .Hot rolled deformed bars.

Providing & fixing UPVC doors & windows in glazzing fixed & openable shutters as per design approved by Architect at all floors.

Providing and fixing M.S grills of required pattern in frames of windows etc with MS flats,square or round bars etc. all complete fixed to opening/wooden framesrawl plugs screws etc.

P/ fixing stainless steel (304 grade) railling in the staircase of each floor & Front entrance foyer

CEMENT PLASTER

12mm thick cemnt plaster 1:4 mix (1 cement;4 fine sand ) incld. carriage complete

15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand).incld. Carraige complete.

Providing and applying white cement based putty of 2mm thickness of approved brand and manufacture over plastered surface to prepare the urface even and smooth complete

FLOORING AND FINISHING (.incld. Carraige complete)

Cement concrere flooring 1:2:4( 1cement :2 coarse sand :4 grade stone agg) finished with floating coat of neat cement incld. Cement slurry , but excluding the cost of nosing of steps etc. complete 50mm thick with 20mm nominal size stone aggregate.

Kota stone slab 25mm thick in risers of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:3 (1 cement :3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing conplete.

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished) machiane cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Raj Nager plain white marble/ udhaypuri green marble/ zebra black marble (Area of slab upto 0.5sqm) 18mm thick

Providing and fixing vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarsse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 100x100cm

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coat) over and including priming coat with cement primer

Providing/ fixing 1st quality glazed tiles conforming to IS: 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shapes except bergundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1cement : 3coarse sand) and jointing with grey cement slurry @3.3kg per sqmtr including pointing in white cement mixed with pigment of matching shade complete.

providing and fixing antiskid floor tiles

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound,consisting of applying after surface prepration ,first layer of slurry of cement @ 0.488 kg/m2 mixed with water proofing cement compound @0.253 kg/m2. with polymer mixed slurry.

10cm thick average mud phuska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35kg/cum of earth and gobri leaping with 1 clay : 1 cow dung,and covered with tile bricks of class designation 100 gouted with cement mortar 1:3 mixed with 20% of internal water proofing compound bt wt. of cement and finished net with FPS brick tiles.

Making plinth protection 50mm thick of cement concrete 1:3:6 over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth crushed..incld. Carraige complete.

Supplying, filling, watering, compacting and dressing sand under floors and dressing and Carraige complete.

Anti termite treatment of soil using chemical emulsion (LMR)

Sanitary items

Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS:7231, with all fitings and fitures complete, including cutting and making good the walls complete including cutting and making good the walls and floors wherever required recommended by engineer. White viterous China Orissa pattern W.C pan of size 580x440mm with integral type foot rests.

Providing and fixing white vetreous chine pedestal type water closed (European type W.C pan) with seat and lid, C.P brass hinges and rubber buffers, 10 litre low level, white PVC flushing cistern with manually controlled device *handle lever) conformig to IS :7231 with all fittings, C.I/M.S brackets 40mm diameter flush bend, with fitting and clamps, over flow arrangement with specials and mosquito proof coupling of approved mnicipal design complete inclusing painting of fittings and brackets, cutting and making good the wall and floors whercecer required W.C. pan with ISI marked black solid plastic seat and lid

Providing and fixing wash basin with C.I/M.S brackets, 32mm C.P brass waste of standard pattern including painting of fittings and brackets cutting amaking good the walls wherever required. Flat back wash basin size 550x400mm with Pedestal

Providing and fixing Salem Stainless steel A ISI 304 (18/8)kitchen sink as per I.S 13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets cutting and making good the walls wherever required. 510x1040mm bowl depth 250mm

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete flexible pipe 32mm dia

Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approced make and shade with 6mm thick hard board backing.

Rectangular shape 453x357mm (outer dimensions)

Rectangular shape 1500x450mm

Providing and fixing PTMT waste coupling for wash basin and sink of approced quality ad colour waste coupling 31mm of 79mm length and 62mm breadth weighing not less than 45gms.

Providing and fixing PTMT towerl rail complete with brackets fixed to wooden cleats with CP brass screws with conealed fitting arrangement of approval quality and colour 450mm long towel rail with total length of 495mm, 78mm wide and effective eight of 88mm, weighing not less thang 170gms.

Providing and fixing CPVC pipes having thermal stability for hot and cold water supply of approved make like supreme, fenolex Prince or equivalent including all CPVC plain and brass threaded fittings I/C fixing the pipe with clamps at 1.00m spacing this included jointing of pipe and fitings with one step CPVC solvent cement, trenching , refilling and testing of joints complete as per direction of engineer-in-charge (concealed work including cutting chases and making good the wall etc.) including all fitings and accessories.

15mm pipe

20mm pipe

25mm pipe

32mm pipe

Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end) 25mm nominlar bore.

25mm nominlar bore

32mm nominlar bore

Providing and fixing ball valve (brass) of approved quality complete

15mm nominal bore

20mm nominal bore

Constructing masonry chamber 30x30x50cm, inside with 75 class designation brick work in cement mortar 1:5 (1 cement: 5 fine sand) for stop cock, with C.I surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg. 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement:5 fine sand: 10 graded stone agg. 40mm nomminal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design (Crushed)

Constructing masonry chamber 60x60x75cm, inside with 75class designation brick work in cement mortar 1:5 (1 cement: 5 fine sand) for sluice valve, with C.I surface box 100mm top diameter 160mm botom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone agg. 20mm nominal size ) necessary excation foundation concrete 1:5:10 (1 cement:5 fine sand: 10 graded stone agg. 40mm nomminal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design (Crushed)

Inside size 90x80cm and 45cm deep including C.I cover with frame (light duty) 455x610mm internal diamension total weight of cover and frame to e not less than 38 kg( weight of cover 23kg and weight of frame 100kg) with FPS bricks with class designation 75 and with crushed stone agg.

Inside size 120x9cm and 90cm deep including C.I cover with frame (light duty) 560mm internal diamension total weight of cover and frame to e not less than 208 kg( weight of cover 23kg and weight of frame 100kg) with FPS bricks with class designation 75 and with crushed stone agg.

Providing and placing on terrace 9at all floor levels) polythylen water storage tank ISI: 12701 marked indicating the BIS Lincese No with cover and suitable locking arragement and making necessary holes for inlet outlet and over flow pipes but without fittings and the bases support for tank (sintex, dlectroplast, lous or equivalent hving valid ISI license)

Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931 15mm nominal bore.

Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms , 15mm nominal bore

Providing and fixing C.P stop cock (concealed) of standard design and of approved make conformin gto IS:8931 15mm nominal bore

Providing and fixing C.P brass angle valve for basin mixer and gyser points of aproved make conforming to IS:8931 15mm nominal bore

Providing and fixing C.P grass close hole basin mixer pillar tap of approved and make weighing not less than 1.970Kg 15mm nominal bore of standard back type

Providing and fixing C.P grass close hole basin mixer pillar tap of approved and make weighing not less than 1.970Kg 15mm nominal bore of standard back type

Cutting holes upto 15x15cm in RCC floors and roofs for passing drain pipe etc. and reparing the hole after inserting of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone agg. 20mm nominal size) including finishing compel;te so as to make it leak proof

Making hole upto 20x20cm and embedding pipes upto 150mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement :3 coarse sand:6 graded stone agg. 20mm nominal size) incld. Disposal of mulba

Providing and fixing CPVC single socketed pipes, including collars etc. working pressuer of 4Kg per sqcm of approved make like supreme, fenolex prince or equivalent in proper line/ alignment / gradient including jointing etc. complete with recommended Adhesve colour seal ring.

75mm dia

100mm dia

150mm dia

Making soak pit 6.00 mtr dia and 5.00mtr deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75 and S.W drain pipe 100mm diameter 1.8mtr long complete as per standard design.

Providing and fixing of 2 HP Motor (boosting pump) of Kirloskar, sharp or equivalent make with necessary G.I fittings etc. Complete

SHARAT PURI CONTRACTORS

MOHD SALEEM

Ghulam Mohammad Bhat

SABZAR AHMAD ROY