Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.1 LAccepted-AOC NO 92 KUVEMPUNAGAR 2ND STAGE JALAHALLI EAST BANGALORE 560 014 | 560014 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹24.6 L+₹15,897.90 (0.65%)Rejected-Finance | L2 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 3 | L3₹24.9 L+₹45,626.40 (1.87%)Rejected-Finance | L3 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 4 | L4₹25.0 L+₹56,126.90 (2.30%)Rejected-Finance NO 9 LAKSHMI NIVAS SOMASHETTAHALLI CHIKKABANAVARA POST BANGALORE 560 090 | BENGALURU URBAN | KARNATAKA | 560090 | L4 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 5 | L4₹26.9 L+₹2.4 L (9.93%)Rejected-Finance 21 9TH MAIN 4TH CROSS GOWDAKEHOLA BAGALAKUNTE NAGASANDRA POST BANGALORE 560073 | BENGALURU URBAN | KARNATAKA | 560073 | L4 | Rejected-Finance Rejected. Quoted rates are higher than L1 |
Tender Value
Refer Docs
EMD Value
₹49,600
Closing Date
6 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M AF Jalahalli
Garrison Engineer M AF Jalahalli Bangalore 560013
8660ADDITION AND ALTERATION TO SMQ AT OLD IMH AREA AT AF STN JALAHALLI EAST UNDER GE M AF JALAHALLI BANGALORE
2022_MES_522988_1
8660/E8
Open Tender
Civil Works
Item Rate
152 days
Garrison Engineer M AF Jalahalli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF MAINT PUBLIC FUND ACCOUNT
₹49,600
19 Aug 2022
9 May 2022
8 Jun 2022
9 May 2022
6 Jun 2022
23 May 2022
10 May 2022 - 16 May 2022
Amount
Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for.
Material and labour for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in sub base, pavings, mass concrete all as specified and directed .
Material and labour for 50mm thk PCC 1:2:4 type B-1 using 20mm graded stone agg as in flooring finished even and smooth without using extra cement all as specified and directed .
Material and labour for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in plinth protection complete finished fair and even.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified.
Material and labour 25mm thk PCC 1:2:4 type B-1 using20mm graded agg as in flooring finished fair and even without using extra cement.
Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar.
Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.
Material and labour for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes all as specified and directed .
Material and labour for rendering 10mm thick in CM 1:3 on brick work or concrete surfaces as in backing coat to receive wall tiles etc.
Material and labour for Ist quality non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.
-Ditto- all as per item Ser No. (11) above but in skirting/dados etc.
Material and labour for Ist quality coloured glazed ceramic tiles of size 300x200x7 to 8mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match.
Material and labour for 20 mm thick screed bed in cement mortar 1:6 for laying floor finishes all as specified and directed .
Material and labour for Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick with white cement and pigment, set, jointed and pointed in neat cement slurry in floors all as specified and directed .
Material and labour for pre- polished (Mirror finish) granite slab machine cut, in skirting/dado, steps, jambs, pillars, window cill, cooking platform etc. of any shade as approved by GE of 15 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing (Granite finish) with suitable grinding stones complete all as specified and as directed.
Material and labour for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in coping, benching in floor complete all as specified and as directed.
Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins, arches etc complete
Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6.
Material and labour for Rendering 15mm thick in CM (1:4) (5mm with WPC over 10mm thick in two layers) on external surfaces of walls mixed with water proofing compound on stone masonry/roof plaster under WPT/concrete surface or brickwalls finished even & smooth without using extra cement. Note : WPC shall be measured & paid seperately
Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.
Material and labour for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement
Material and labour for making groove in plaster of size 10mm width and 8mm depth in junction of wall and Col/Beam and applying Sika Primer 3N and filling with Sikaflex Construction (AP) with 112gm sealant/rm incl thermocol rod backup as per manufacturer's instructions
Supply only integral water proofing compound.
Material and labour for distempering walls with two coats of washable distemper oil emulsion on new surfaces over a coat of alkali resistant priming paint (white or tinted) as directed of distempered and painted surfaces as in preparatory work to give uniform and smooth finish all as specified.
Material and labour for two coats of cement based paint over a coat of alkali resistant priming paint on newly plastered surfaces of wall including necessary preparation and all as specified and directed.
Material and labour for preparation new surfaces of wall and applying three coats of white wash on ceiling.
Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for.
Material and labour form work to soffits of suspended slabs such as roof slab floor slab not exc 200mm thick with flat rough finished surface of concrete.
Use and waste Form work to rough finished edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in oncrete walls, floor and roofs n exc 10 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide
Material and labour reinforced cement concrete (1:2:4) type B-1using 20mm graded stone aggregate as in slabs and finishing exposed surfaces fair & even all as specified.
Material and labour Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cracking bending spirally hooking ends and binding with MS wire (annealed) no less than 0.90 mm dia
Material and labour for Pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in cement mortar 1:4 as in cover slab including all necessary form work. Exposed surfaces of concrete shall be finished even and smooth without using extra cement. (Note : Reinforcement shall be measured and paid separately under relevant items of this schedule).
Material and labour Providing and injecting chemical emulsion for post construction anti termite treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per liner meter including drilling and plugging holes etc in apron complete all as specified and directed
Material and labour for injecting at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 50mm centre to centre and sealing the same complete all as specified and directed.
Removal of existing roof treatment with plastering and cleaning the surface with wire brushes and washing and drying the top surface for execution of work complete all as specified and directed.
Material and labour for 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as padding for roof surfaces, finished even and smooth complete all as specified and as directed.
Material and labour for 15 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding/under WPT) with WPC all as specified and directed. (Note : WPC shall be measured and paid separately)
Material and labour for water proofing treatment on horizontal and vertical surface with polymeric water proofing membrane at the rate of 4Kg/Sqm reinforced with min160 gram/Sqm non woven polyster mat over a coat of bitumen primer @.20 Ltr/Sqm and a coat of hot blown bitumen of 85/25 or 95/15 @ 1.20 Kg/Sqm applied on the top of Polymeric membrane and finally finished with a coat of bituminous aluminium paint @ of 100 grams/Sqm all specified and directed and testing complete on completion.
Supply and fixing PVC low level flushing cistern 10 Ltr capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces all as directed
Supply and fixing in repairs viterous china wash basin white flat back size 550 x 400 mm including brackets, waste coupling etc all as specified and directed
Taking out steel water tubing and connections 15 mm dia.
All as per item No (42) hereinbefore but 20mm dia.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 including elbow,tee,fta,mta and all fittings 20mm dia on walls/ceiling or laying in floors complete all as specified
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 including elbow,tee,fta,mta and all fittings 16mm dia on walls/ceiling or laying in floors complete all as specified
Supply and fixing in repairs 15 mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for cpvc pipe.
Supply and fixing in repairs stop valves fancy type chromium palted with long shank and cup (concealed type ) screwed for cpvc pipe of 15 mm bore.
Supply and fixing in repairs brass Choromium plated shower rose with or without swivel joints 125mm size including fixing complete all as spfd.
Supply and fixing in repairs 20 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe.
Supply and fixing in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for cpvc pipe or for brass ferrule and fixed complete for 15 mm bore.
Supply and fixing in repairs pillar tap with capstan heads chronium palted screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for cpvc pipe and fixed complete for 15 mm bore
Supply and fix in repairs viterous china squatting pan Orrisa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc including provision of PCC (1:5:10) concrete complete all as specified and as directed
Material and labour for aluminium drapery rod outer dia 25mm with powder coated paint thickness ce welded MS pipe with corrugated PVC extrusion having plastic rings made of ABS plastic with outer dia 56-58 mm & inner dia 40-42mm incl Brackets/holding clips shall be at galvanised steel 1.6mm thick complete all as specified and directed.
Dismantaling of cast iron / RCC/ PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings
Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor/walls bore of pipe 75 mm with PVC clamps and saddles
All as per item No. (56) above but bore of pipe 110 mm
Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 75 mm
All as per item No. (58) above but bore of pipe 110 mm with access door
Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm bore
All as per item No (60) above but bore of pipe 110 mm bore
Supply and fixing PVC (SWR) reducers 110 mm bore
Supply and fixing PVC (SWR) vent cowl bore of 110 mm bore
Supply and fixing PVC (SWR) bends any radius of bore 75 mm bore
Supply and fixing PVC (SWR) bends any radius of bore 110 mm bore
Supply and fixing in repair tubular towel rail brass chromium plated 20 mm dia 'D' type 60 cm long between flanges
Supply and fixing in repair waste coupling 32 mm dia of PTMT (half or full threaded) minium weight 45 gram.
Supply and fixing PVC flexiable pipe (Connecter) 15 mm dia, 450 mm long with check nut and bolt with washer all as specified
Material and labour for PVC waste pipe 32 mm dia flexible with cup & pressure rating 6 kgf/cm2 to fit wash hand basin waste coupling complete all as specified and directed by Engr-in-Charge.
Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames).
All as per item (70) above but exceeding 1.5Sqm but not exceeding 4 Sqm each
Taking down shutters of any description exceeding 1 Sqm and n.exc 2 sqm each.
Taking down shutters of any description not exceeding 1 Sqm each.
Material & labour for 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, all as specified and directed.
Supply and fixing factory made, 2nd class hardwood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.
Supply and fixing factory made, 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats and all as specified and directed.
All as per item No (76) hereinbefore but divided into squares, with plain chamfered or rounded, mitred and ribeted sash bars any numbers as in window shutter 30 mm thick all as specified in SSR Part I Sec 8 Clause 8.24 (b).
Supply and fixing of solid PVC door frame A Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant
Supply and fixing factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick moulded PVC prelam sheet on front face and 5mm prelam coloured PVC sheet on back face, complete all as specified and directed by Engr-in-Charge.
Taking down steel shutters windows / ventilators area n.ecx 1 Sqm each including all fittings and all as specified and directed.
Supply and fixing steel ventilators with top hung shutter including hinges, steel pegs, stay, MS handles etc complete all as specified and directed.
Material and labour for steel windows with side hung shutters incl hinging devices and steel peg stay , MS handles etc complete with glazing bars dovetailed or welded all as specified and directed.
Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and S/F sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including. Necessary new oil putty or with existing metal beadings complete.
S/F sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including. Necessary new oil putty or with existing metal beadings complete.
Supply and fix 4mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.
Supply and fixing MS bends streps, hold fast or small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified.
Material and labour PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in hold fast
Supply and fixing Extruded Aluminium alloy handles, fabricated type, anodised 150mm
Supply and fixing in repairs Extruded Aluminium alloy handles, fabricated type, anodised 150mm
Supply and fixing in repairs Floor door stoper of alumunium alloy body and tongue, aodised with hard drawn steel spring, fixed in floor, 150mm size.
Supply and fixing 150 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed
Supply and fixing 200 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed
Supply and fixing 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed
Supply & Fixing 150 mm size Aluminium handles, cast type, anodised
Supply & Fixing in repairs 125 mm size Aluminium handles, cast type, anodised
Supply and fixing Butt hinges, medium weight coldrolled mild steel and fixed 50mm size.
All as per item No (96) hereinbefore above but 100mm size
Resecuring or easing and adjusting wooden shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each without taking down
Supply and fixing Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
Material and labour for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide on new surfaces in any tint complete all as specified.
Material and labour for preparation of new wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint in any tint over a coat of wood primer on new surfaces all asspecified and directed
Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence salts trading oil and greasy spots etc by applying one coat of white wash on walls
All as per item No 102 hereinbefore but one coat of white wash on Ceiling
Material and labour for Preparation of old treated wooden surface exceeding 10 cm width and grith and applying one coat of synthetic enamel paint all as specified
Material and labour for preparation of old decorated surfaces of walls including cornices, pilasters etc (Plastered or un plastered surfaces) and applying one Coat of cement base paint complete all as specified and as directed.
Material and labour for preparation of old surfaces of wall including complete removal of existing treatment including washing down and cleaning etc. and applying 3mm thick wall putty on walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed
All as per item No (106) hereinbefore but one coat of oil bound distemper on old wall surfaces including preparation of surfaces Washing, rubbing down and stopping of distempered and painted surfaces.
Material and labour for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint on old surfaces in any tint complete all as specified.
Material and labour for preparation of old decorated surface of walls and applying one coat of weather coat (ACE) exterior emulsion paint all as specified and directed
Supply and fixing in repairs Rotational moulded Polyethylene water storage tank - 500 liters capacity (cylidrical vertical with double layered, threaded top cover) hoisted and fixed in position all as specified in SSR part I.
Supply and fixing 1mm thick Stainless steel Plate rack of size 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete all as directed.
Supply and fixing in repairs sink with drainage board made of stainless steel 1mm thick with plugs, washer and wastes including fixing in cement mortor 1:3 to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915x460mm,bowl size 410 mmx 330 mmx 160 mm including CP waste coupling all as specified.
Supply and fixing stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or serviceable fillets complete as directed by EIC
Supply and fixing in repair stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or old serviceable fillets complete as directed by EIC
Supply and fixing for 8 feet 4 pipes pulley operatoed cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm, made up of detrin with rope guide mounted on channel pair of lemgth 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg, minimum weight of rope shall not be less than 7700Gms/unit (for 04 pipes).
Making arrangement of scaffolding in buildings, cutting of small trees/plants at the stem, removal of the roots of the plants by using acids, cutting around the spot for removing the roots any size and making good with cement mortar 1:3 or with PCC 1:2:4 including finishing with existing complete all as directed by Enginner-in-charge.
Material and labour for Writing letter or figures (Block, Roman, Italian or Indian) not exceeding 30cm high including preparation of base surface any colour as approved complete.
Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level
shashi shekar construction
S CHANDRASHEKAR (SREE BUILDERS)
LAKSHMI CONSTRUCTIONS
SRI MAHALAKSHMI CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .