C/O Govt. Pooled residential accommodation for general administration department at Shimla, C/O 10 No. type-I Qtrs. in place of block No.47 at Richmond Estate Shimla (SH- Building portion, site development, WS and SI installation and rain harvesting

Amount

EARTH WORK:- Cutting in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and un- useful material and transportation of the un-useful material for disposing at approved dumping site or otherwise and including payment of prescribed charges of dumping to the owner of dumping site( to be arranged by the contractor) as per satisfaction of Engineer- in -Charge through all modes including payment of prescribed dumping charges of M.C. if loved any of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required ). All useful material such as stones shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation used / removed as per the direction of Engineer-in-Charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges and as directed by the Engineer in Charge.

Excavation in earth work etc. in all kinds of soils including spade work, saturated soil,pick work, jumper work, blasting & chiselling / wedging out rock etc.and pumping or bailing out water including dressing of side and beds and stacking of serviceable materials and disposal of surplus earth in all leads and disposed earth to the levelled and neatly dressed including carriage of materials all lead and lifte as per direction of Engineer-in-charg as directed by Engineer-in-charge. at site according to the HPPWD specifications of 1990 volume-I and sorting out useful and unuseful materials and stacking the same in all leads and lifts and levelling of surplus excavated earth on approved dumping sites (to be arranged by the contractor including payment of prescribed dumping charges of Municipal Committee /local body if levied any) through all mode of transportation including head load, animal load or mechanical means alonwith its levelling, fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidental necessary to complete the work by mechanised means and labour (if any required).All usefull materials such as stones, shingles, aggregates and slates shall be sorted alog road side to the maximum possiable extent ia all leads and lifts through all modes of transportation and used/ removed as per direction of Engineer-in-Charge. ant lose to the public and private property during the course of execution and disposal of serviceable and unservicable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges and as directed by the Engineer in Charge.

Form Work:- Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: including all incidental charges and as directed by the Engineer in Charge.

Foundation footing and basis of columns.

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilever

Columns, Pillars, Piers, Abutments, Posts and Struts

Shelves (cast in situ)

Edges of slabs and breaks in floors and walls(under 20cm wide)

Concrete work:- Providing and laying in position specified grade of reinforced cement concrete,mechanically mixed and vibro compacted excluding the cost of centering, shuttering, finishing and reinforcement including carriage of materials in all leads and lifts - All work up to plinth level. 1:5:10(1 cement : 5 coarse sand: 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level (i) 1:2:4 (1 cement:2 Coarse sand :4 graded stone aggregate 20mm nominal size) including all incidental charges and as directed by the Engineer in Charge.

1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size complete excluding form work including carriage of material within all leads and lifts as per direction of Engineer-in-charge

1:5:10 (1 Cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size complete excluding form work including carriage of material within all leads and lifts as per direction of Engineer-in-charge

Providing and laying 40mm thick cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm (twenty millimetre) nominal size) laid in one layer finished with a floating coat of neat cement upto all floor levels complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and laying in position specified grade of reinforced cement concrete,mechanically mixed and vibro compacted excluding the cost of centering, shuttering, finishing and reinforcement including carriage of materials in all leads and lifts - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and laying cement concrete work 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 20 mm nominal size) curing complete excluding the cost of form work in all leads and lifts:-including carriage of material within all leads and lifts as per direction of Engineer-in-charge.foundation and plinth

Providing and laying cement concrete work 1:1½:3 (1 cement : 1½ sand : 3 graded stone aggregate 20 mm nominal size) in all leads and lifts:-Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever. including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.including carriage of material within all leads and lifts as per direction of Engineer-in-charge. (i) Mild steel and Medium Tensile steel bars

BRICK MASONARY:- Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure in foundation and plinth level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand).including carriage of material within all leads and lifts as per direction of Engineer-in-charge

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)including carriage of material within all leads and lifts as per direction of Engineer-in-charge

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth level. In Cement Mortar 1:4 including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. In Cement Mortar 1:4. including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Wood work:- Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought,framed and fixed in position. (i)Second class deodar wood .including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.(i)Second class deodar wood. including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 35 mm thick shutters panelled glazed or panelled and glazed shutters for doors windows and clerestory windows.including black enamelled iron butt hinges of required sizes with necessary screws excluding oaneling which shall be paid for separately all complete as per direction of engineer in charge.Second class deodar wood

Providing and fixing panelling and glazing in panelled and panelled or glazed shutters for doors windows and clerstory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured) panneling for pannel for pannelled or glazed shutter 40 mm thick . complete as per direction of engineer in charge. (i) Prelaminated particle board with decorative lamination on both side grade I

4mm thick glass panes weight not less then 10kg /sqm

Providing and fixing 35 mm thick shutters wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws. complete as per direction of engineer in charge.Second class deodar wood

Providing and fixing plywood lining with butt jointing and nails (frame work to be measured and paid for separately) complete as per direction of engineer in charge.Second class deodar wood. 6mm thick

Providing and fixing 19mm thick commercial board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc. complete as per direction of engineer in charge.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup boards i/c fixing with nickel plated piano hinges with screws etc. complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge:-

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge:-

Providing and fixing square edges teak wood lipping / cover fillets beading 19mmx6mm section including mitring junction with wood screws and nails complete. including carriage of material within all leads and lifts as per direction of Engineer-in-charge

Providing and fixing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). including carriage of material within all lead and lifts. as per direction of Engineer-in-charge

Providing and fixing 40x5 mm flat iron hold fast 14 cm long including khudda fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm as per direction of Engineer-in-charge

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm. including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. (i)125 mm. including carriage of material within all lead and lifts as per direction of Engineer-in-charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing Aluminium hasps and stapples safeety type with necessary screws etc complete 90mmincluding carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing MS grills of required patterns in frames of window etc with MS flats square or round bars etc including priming coat with approved steel primerincluding carriage of material within all lead and lifts as per direction of Engineer-in-charge.

Providing and fixing Ist quality ceramic white/coloured glazed wall tiles of minimum size (300x450mm) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) :Medium shade pigment using 50% white cement and 50% ordinary cement .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of :Medium shade pigment using 50% white cement and 50% ordinary cement including carriage of material within all lead and lifts as per direction of Engineer-in-charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Kota stone slabs 20 mm thick in risers of steps, skirting,dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Extra for pre finished/making nosing in treads of steps of Kota stone/ sand stone slab./marble/granite stone.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Baroda green marbleincluding carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing Garsa stone 12mm.cladding on R.C.C.surface side as on faces of Arch masonry walls etc.on 12mm. thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 0.60mm thick TATA Durashine or equivalent prepainted steel sheet of approved brand and shade and design in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required including carriage of material within all leads and lifts as per direction of Engineer-in-charge:-0.60mm (zero point sixty millimetre) thick sheet.

Providing and fixing ridges or hips or valley 60cm overall with 0.45mm thick TATA Durashine or equivalent prepainted steel sheets of approved brand, shade and design with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing flashing 38cm overall with 0.45mm thick TATA Durashine or equivalent prepainted sheet of approved brand shade and design with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 30cm wide 120cm overall Box type gutter with 0.45mm thick TATA Durashine or equivalent prepainted sheet of approved brand shade and design with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating gutter fixed with bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design (frame work to be measured and paid for separately). including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing valley 90cm overall with 0.45mm thick TATA Durashine or equivalent prepainted steel sheets of approved brand, shade and design with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing polycarbonatd tranparent sheet 1.20mm thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer complete with all accessories as required as per direction of Engineer-in-Charge

Providing and fixing 110 mm diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 110 mm bend.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Shoe (Plain) 110 mm Shoe

Providing and fixing unplasticised -PVC pipe clamps of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.(i)110 mmincluding carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and laying PVC high grade pressure pipe in trenches including fixing of joints properly with approved adhesive complete in all respects including carriage of materials within all leads and lifts :-.P.V.C. plastic pipe 150 mm nominal bore. as per direction of Engineer-in-charge

P.V.C. plastic bend 110 mm nominal bore.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Structural steel work riveted, bolted or welded in built up sections including hollow sections , trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. as per direction of Engineer-in-charge

Providing and fixing MSBP sheet 1.66 to 2.00 mm thick in eaves board/faciasoffits/ceiling including cutting,fixing and welding to steel roof members and applying a coat of red lead primer complete as per instruction of Engineer-in-charge

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. as per instruction of Engineer-in-charge

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)as per instruction of Engineer-in-charge

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)..including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Painting two coats on new wood and wood based surfaces with white enamel paints in .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture. .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

15 mm cement plaster in single coat on fair side of brick/stone walls for interior plaster up to all floor level i/c arrises internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth in all leads and lifts with finished with cement mortarof mix 1:6 (1 cement: 6 fine sand) on .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

15 mm cement plaster in single coat on rough side of brick/stone walls for interior plaster up to all floor level i/c arrises internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth in all leads and lifts with finished with cement mortarof mix 1:6 (1 cement: 6 fine sand) on .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

6 mm cement plaster to ceiling finished with a floating coat of neat cement of mix 1:3 (1 cement : 3 fine sand).including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing cast iron manhole cover 450x610 mm weight of cover and frame should not be not less than 38 Kg. with in all leads and lifts or as per the direction of Engineer-in-Charge

Providing and fixing cast iron cover 300X300 mm with frame for gully trap the weight of cover to be not less than 4.53 kg ..including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Stone filling behind retaining wall.Including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing weepholes in brick masonry/stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

W.S & S.I Installation:- Providing and fixng to wall ceiling floor galvanised mild steel tubes (Medium grade), including tube fitting and cutting chase etc complete.15 mm (one hundreded fifty) nominal size :-.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

20 mm (one hundreded fifty) nominal size :-

Providing and laying in trenches galvanised mild steel tubes (Medium grade), tube fittings. 25 mm (twenty five millimetre) nominal bore :-

Making connection of galvanized steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty milimetre to Forty milimetre) nominal bore.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto a height of 10 metres above ground level :- 500 litres net capacity tank. .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Fixing water metre and stop cock in galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, socket . 15 mm nominal bore. .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing ISI marked high pressure PVC (finolex) waste and ventilating pipes with collar including fixing with approved adhesive etc..including carriage of material within all lead and lifts as per direction of Engineer-in-charge :-110 mm (one hundreded and Ten) nominal size :-

150 mm (one hundreded fifty) nominal size :-

Providing and fixing PVC (finolex) door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. 110 mm (one hundreded and Ten) nominal size :-.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

150 mm (one hundreded fifty) nominal size :-

Providing and fixing PVC (finolex) plain bend ISI marked including fixing with approved adhesive etc. complete.(i)110 mm (one hundreded and Ten) nominal size :-.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

150 mm (one hundreded fifty) nominal size :-

Providing and fixing PVC(finolex) single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.(i)110 mm (one hundreded and Ten) nominal size :-.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

150 mm (one hundreded fifty) nominal size :-

Providing and fixing PVC (finolex) single equal branch plain ISI marked including fixing with approved adhesive etc. complete. (i)110 mm (one hundreded and Ten) nominal size :-.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

150 mm nominal size :-

Providing and fixing PVC (finolex) collars ISI marked including fixing with approved adhesive etc. complete. (i) 110 mm (one hundreded and Ten) nominal size :-.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

150 mm (one hundreded fifty) nominal size :-

Providing and fixing PVC (finolex) Cowl including carriage of materials within all leads and lifts :-(i)110 mm (one hundreded and Ten) nominal size :-.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

110 mm (one hundreded and Ten) nominal size :-

Providing and fixing PVC floor trap(finolex) ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 75 mm..including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing vtreous china water closet squatting pan (Indian type W.C Pan) size 580 mm earth work.bed concrete. Foot rest and trap to be measured and paid for separately. Orrissa pattern :.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing viterous China wash, down water closet (European Type W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) seat and cover to be measured and paid for separately .including carriage of material within all lead and lifts as per direction of Engineer-in-charges :-Anglo Indian universl closet.

Providing and fixing plastic seat (solid type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers. White plastic seat and cover (solid type) with C.P. Brass hinges and rubber buffers.

Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan)100mm size..including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing 10.00 ltr.capacity PVC low level flushing cistern Hind ware sleek ultra design No 186575 size 42 X 39 X 14 cm or equivalent with a pair of brackets with fittings such as lead valve, syphon, .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing viterous China wash basin Hind ware IS marked IS No. 2556 or equivalent wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white. Flat back :-550 X 400 mm..including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting. 610 x 510 mm with bowl depth 200 mm..including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing C.P. brass waste for wash basin or sink including carriage of materials within all leads and lifts :-32 mm dia. .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing & fixing 32 mm dia, PVC waste pipe for wash basin or sink including check nut .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing & fixing 100 mm dia, C.P. grating.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing looking mirror of superior glass with plasitic frame including carriage of materials within all leads and lifts :-

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws . 600x20mm. .including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Providing and fixing Acrylic shelf with C.P. brass bracket and guard rail complete, fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts

Providing and fixing CP brass bib tap with capstan head.including carriage of material within all lead and lifts as per direction of Engineer-in-charge :-15mm dia :-

Providing and fixing CP brass pillar tap with capstan head .including carriage of material within all lead and lifts as per direction of Engineer-in-charge:-15mm dia

Providing and fixing C.P. brass angle valve with CP flange for basin mixer and geyser points of approved quality conforming to IS:8931.including carriage of material within all lead and lifts as per direction of Engineer-in-charge15mm dia

Providing and fixing PVC connection pipe Heavy Duty with brass union .including carriage of material within all lead and lifts as per direction of Engineer-in-charge:-45 cms length :-15mm nominal bore

Providing and fixing brass full way valve with wheel .including carriage of material within all lead and lifts as per direction of Engineer-in-charge :-15mm nominal bore

20 mm nominal bore :-

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.including carriage of material within all lead and lifts as per direction of Engineer-in-charge

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing ISI marked high pressure PVC (finolex) of working pressure not less than 4.5 kg/sqm in trenches including fixing of joints properly with approved adhesive complete in all respects.including carriage of material within all lead and lifts as per direction of Engineer-in-charge150mm dia .

Manishsharma