Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.5 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING L1 | |
| 2 | L2₹16.7 L+₹1.2 L (7.58%)Rejected-AOC | L2 | Rejected-AOC REJECTED NOT BEING LOWESWT | |
| 3 | L3₹17.0 L+₹1.5 L (9.43%)Rejected-AOC | L3 | Rejected-AOC REJECTED NOT BEING LOWESWT |
Tender Value
₹19.5 L
EMD Value
₹39,060
Closing Date
16 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) AWANTIPUR
GE (AF) AWANTIPUR, 8 FBSU, AF AWANTIPUR
PROVISION OF CERTAIN REVENUE WORKS AND MINOR WORK AT 8FBSU
2022_MES_543782_2
GE (AF) AWA-28/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (AF) AWANTIPUR
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (AF) AWANTIPUR
₹39,060
Yes
20 Dec 2022
20 Oct 2022
18 Nov 2022
20 Oct 2022
16 Nov 2022
3 Nov 2022
Amount
Surface Excavation not exceeding 30 cm deep and averaging 15 Cm deep and getting out in any type of soil, complete all as specified and directed.
Excavation in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m deep for foundation , laying pipes, drain or man holes etc not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out, complete all as specified and directed.
Returning filling in, soil including spreading leveling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed.
Removing of excavated material (soil) to a distance not exceeding 50 metres and depositing where directed at a level not exceeding 1.5metre high from the starting point, complete all as specified and directed.
Plain cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed.
Material and labour for reinforced cement concrete, type B-2 (1:2:4), using 20 mm graded machenically crushed stone aggregates as in foundation and the like complete all as specified and directed.
Use & waste of formwork to soffits of footings and similar work; not exceeding 200 mm thick (Horizontal or sloping) with fair finished surfaces of concrete, complete all as specified.
Material and labour for reinforced cement concrete, type B-2 (1:2:4), using 20 mm graded machenically crushed stone aggregates as in columns and the like complete all as specified and directed.
Use & waste of formwork to cloumns and similar work; not exceeding 200 mm thick (Horizontal or sloping) with fair finished surfaces of concrete, complete all as specified.
Material and labour for reinforced cement concrete, type B-2 (1:2:4), using 20 mm graded machenically crushed stone aggregates as in beams and the like complete all as specified and directed.
Use & waste of formwork to soffits of suspended slabs such as plinth beam, roof beam and similar work; not exceeding 200 mm thick (Horizontal or sloping) with fair finished surfaces of concrete, complete all as specified.
Material and labour for brick work with sub class 'B' bricks, old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:4) complete all as specified and directed.
Supply only integral water proofing compound ISI marked complete all as specified.
Supply and fixing for mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel annealed wire not less than 0.9 mm dia complete all as specified.
Supply and fixing for mild steel TMT bars 10 mm and over dia cut to length, bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel annealed wire not less than 0.9 mm dia complete all as specified.
Spreading and levelling in layers not exceeding 25 cm thick and well ramming including watering as required. Note: - Earth obtained from exacavation works in sl item no.1 and 2 shall be used in filling under floors.
Material and labour for broken stone hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete, all as specified.
Material and labour for cement concrete, type B-1 (1:2:4), using 20 mm graded machenically crushed stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork all as specified and directed.
S & F for anodised aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F for providing & fixing for anodised aluminium window and ventilator shutters ,three tier , aluminium section weighing 0.50 Kg/m including supply and fixing of 4 mm thick glass and stainless steel wire cloth of 0.063 mm dia , width of aperature 1.40 mm and fixed with aluminium beading ,silicon lining and gaskets, necessary joining cleats , glazing clips , rubber neoprene packing, anodised aluminium snap beading srews etc complete all as specified and directed.
Material and labour for 100 mm thick, cement concrete type D-2, 1:4:8 using 40 mm graded machenically crushed stone aggregate, finished even & fair, as in sub base etc.complete all as specified and directed.
Material and labour for 40 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded machenically crushed stone aggregate, finished even and smooth with using extra cement, as in floors, complete all as specified and directed.
Plain cement concrete type B1, (1:2:4), using 20 mm graded crushed stone aggregate as in benching, copping, surface channels and other similar nature of work etc. the like including form work and finishing all exposed surface of concrete incl demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.
Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified and directed.
Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:4), using Water proofing compound complete all as specified and directed . Note:Water proofing compound measured paid separately.
M&L for preparation of new plastered surface on walls and applying two coats of oil bound distemper over two mm wall care putty on plastered surfaces complete all as specified and directed.
Preparing new plastered or un-plastered surfaces of walls and applying two coats Acrylic exterier emulsion paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) over a coat of acrylic primer complete all as specified and directed.
S&F structural steel work as in channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths, cleats etc. confirming to Fe 410-W (E-250 grade quality B).
M & L Rolled Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) orming holes, without any attachment all as specified.
S&F Anodised aluminium snap grid frame work for false ceiling for size of grid 605 x 605 mm including hangers 6 mm dia GI (up to 1200 mm long) adjusting level fixed to roof complete all as specified
S&F 12 mm thick gypsum board ISI Marked fixed with screw to aluminium frame work in ceiling flat or sloppy as per manufacturer instructions all as specified and directed.
S & F galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L Type or J Type or cranked hook bolts in lieu of screws of sheet thickness 0.63 mm class 3 all as specified and directed.
S&F Galvanised plain mild steel sheeting 0.63mm thickness fixed with l or J type or cranked hook boltes with washers, in roofs as in ridge etc all as specified and directed.
Preparation of new surfaces of steel or iron work or CGI/PGI sheeting in walls or roofing over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) complete all as specified and directed.
Demolition of stone, brick masonry built in cement mortar incl quoins, arches, etc and making good the surface of wall with cement plaster 1:6 all as specified and directed
Preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified
S&F 1.00 mm thick plain, black steel sheeting, in eave board & straight flashings (length & girth as fixed) with welded and sholdered joint to be provided all as specified and directed.
Material and labour for 50 mm thick, cement concrete type C-2, 1:3:6 using 20 mm graded machenically crushed stone aggregate, finished even and smooth with using extra cement, asplinth protection, complete all as specified and directed.
Demolition of cement concrete (reinforced) to Roofs, floors (other than ground floors), beams,MH cover, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
M&L RCC (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Type B1 1:2:4 (20 mm gradded aggregate) incl demolition of cement concrete reinforced of any description in any positio complete all specified and directed.
M&L for PCC 25mm thick 1:2:4 type B1( using 12.5mm graded crushed stone aggregates )as in sub flooring , complete all specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all specified and directed.
M&L coloured/printed non skid ceramic tiles 7 mm thick (squre/rectangular) area of each tile exc 0.11 but not exc 0.16 sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed.
M&L coloured vitrified tiles 9 to 10mm thick (square or rectangular ) of area exc. 0.18 sqm and not exc 0.36 sqm and laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed.
-ditto- but on vertical surfaces such as skirting incl rendering in cement mortar 1:3 rough finish to receive the tiles complete all as specified and directed.
M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 350x 250x 7 mm/ 450X 350X 7mm/450x300x7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
M&L for 18-20mm thick granite stone (slab) of any colour/type, (table rubbed and polished) work as in floors/ vertical surfaces, cooking platforms and like, set in neat cement including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortor (1:6) laid and jointed with gray cement slurry mixed with pigment, , complete all specified and directed.
M&L for Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed
Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 15mm thick screed bed in cement mortor (1:6) laid and jointed with gray cement slurry mixed with pigment, complete all as specified and as directed
M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius in cement mortar 1:6, complete all as specified and directed
M&L for Brick work with old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.
M & L for applying of Birla/JK white wall putty approx 3 mm thick in two layer as per manufacturer's instruction including preparation surface and make the surface smooth by rubbing with sand papers etc complete all as specified and directed.
M&L for preparation of newly plastered surface on walls and applying two coats of oil bound distemper incl primer complete all as specified and directed.
S&F GI tubes medium grade 15mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F GI tubes medium grade 20 mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
M&L for cutting chases, pinning in making good to facing where required and pointed in CM 1:3 to ends or edge of landing, steps cills, sunshade, shelves etc and cutting chases for concealed water tubing in stone concrete block or slab walls etc and making good cutting n exc 10 cm girth complete all as specified and directed
S&F in repair sink mixture for mixing (Hot and Cold) 15mm bore chromium plated cast copper alloy with capstan head screwed for iron pipe fixed complete all as specified and directed.
S&F in repair of PVC (SWR) floor trap of 110mm dia, plain with grating incl jointing with solvent cement complete all as specified and directed.
S&F in repair of PVC (SWR) bends any radius of 110mm bore, complete all as specified and directed.
S&F PVC (SWR) pipes single socketed,110mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed.
S&F PVC SWR) 'T' junction 110mm dia complete all as specified and directed.
S&F in repair 32mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm incl connected fittings and jointing complete all as specified and directed.
S&F Waste coupling of CP (half or full threaded) with accessories for stoping and removing to waste water accessories and fixing on granite stone complete all as specified and directed.
Taking down Old U/S copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc.
Taking down Old U/S DB 04 Way 415 Volt/230 Volt including MCB/MCCBs.
Taking down Old U/S light fittings of any type complete all as directed .
Taking down Old U/S old aluminium sub main wiring of any size.
M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including rigid non-metallic PVC conduit of suitable size but not less than 20mm dia , with all fittings, fixed on concealesd including decorative modular cover plates (inner and outer) suitable for housing modular pattern switches/ sockets/ regulators etc. along with necessary metal boxes flush mounting in the wall duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for :- (a) One light/fan point controlled by one switch 6 Amps one way.
(b) One 3 pin 5 Amp socket out let on independent board.
(c) One 3 pin 5 Amps switch socket combination on same Board
All as per item No.69 above but point wiring with 2.5 sqmm PVC FRLS insulated multistranded copper conductor suitable for one 3 pin 15 Amps socket out let and one run of 2.5 sqmm cable for earth in green colour on independent board.
S & F Modular switch 6Amp one way 230 V AC
S&F Modular switch 16Amp one way 230 V AC
S&F Modualr white cover plate with frame of 3 Module.
S&F Modualr white cover plate with frame of 6 Module.
S&F Modular socket outlet 6 Amp intel multi socket for all pins 230 V AC
S&F Modular socket outlet 16 Amp and 6/10 Amp two socket heavy duty 230 V AC.
S/F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete.
Supply and Fixing wall mounted Fan complete of capacity 400mm sweep, having speed 1300 RPM while delivering 60 CMM air.
Supply and fix exhaust fan made of sturdy, engineering plastic complete with louvers shutter, voltage 230V, 50 hz, RPM 1200, copper winding of sweep 300mm
S & F communication modules for TV socket sap code no.ACAKTOW000. MAKE: HAVELLS/ANCHOR/BAJAJ.
S&F LED luminarie 600mmx600mm 36watts 220votls AC Recess mounted with high efficency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roop ceiling including connecting up with driver 3 core flexible copper conductor cases of suitable size complete.
S & F surface mounted 1x20watts LED tube light fitting 220volts AC decorative box type with driver holder incliuding LED tube light connecting up with 3core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F LED wall decorative light fitting aesthetically designed wall bracket light with B22d and E27 lamp holder
S&F LED building security light fitting 35watts 230volts AC outdoor type with high pressure die cast alluminium housing and heat resistance complete with driver lamp bracket with impact and corrosion resistance including thermal management and multiple optics complete with IP-65/66 protection complte.
S & F Sub main wiring with PVC insulated FRLS cable 2 single core 6 sq mm 1100 V grade with stranded copper conductor in and incl rigid PVC Casing & Capping (ISI marked) incl all specials/accessories etc and provision of PVC insulated FRLS copper conductor single core 4.0 sq mm for earth continuity all as directed.
S & F Sub main wiring with PVC insulated cable 2 single core 4 sq mm 1100 V grade with stranded copper conductor in and incl rigid PVC conduit comcealed in wall (ISI marked) incl all specials like joint elbow, Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 2.5 sq mm for earth continuity all as directed.
S & F Triple pole and neutral sheet steel powder coated vertical type double door Distribution board for MCCB/MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 415 V, 50 Hz supply TP&N DB system 06 ways. Make: Legrand/L&T/Havells/ABB
S & F MCCB , 415 V, 16 KA, 4 Pole 100 Amps.
S& F MCB SP , 6-32 amps, 10 KA , 240 volts ,
S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20Amps MCB 240V AC 50Hz.
Taking down carefully exisitng split type AC of capacity 1.5/2.0TR from wall keep in safe custody of AGE E/M store after complete the wall work re-fixing the same complete with gas filling and working in as same satifactory with Engineer-in-Charge.
Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6.0 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion.
Supply and install hi wall split AC units of capacity 1.5 TR indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity including S&F of stand for outdoor unit of AC complete all as specified and directed. Make- Voltas/ Bluestar/LG
Supply only 5.0 KVA Voltage stabilizer for Air Conditioner voltage 170-280 volts I/C outgoing stabilized at 230 Volts +/- 5% tolerance complete all as specified. Make- MICROTEK/ V-GUARD
Supply & Fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 V complete all as specified and directed.
Note :- An amount of Rs. 3,209.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .