SPECIAL REPAIRS AND CERTAIN PROVN WORKS IN THE AOR OF GE C KIRKEE

Amount

Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n. exc. 1.5 mtr wide and 1.5m in depth for foundation and getting out in soft/ loose soil complete all as specified and directed.

Returning filling in including, spreading, levelling, watering and well ramming in layer n. exc. 25 cm in soil complete all as specified and directed.

M & L Spreading and levelling in layer n. exc. 25 cm thick including well ramming watering as required complete all as specified and directed.

M & L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation, filling and mass concrete complete all as specified and directed.

M&L for formwork to sides and soffits of plinth beam, sides of footings, bass of columns and similar work with rough finished surfaces etc complete all as specified and directed.

M&L for formwork to sides of columns and similar work with rough finished surfaces etc. complete all as specified and directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for Hardcore of broken stone or boulders gauge n exc 63mm, deposited spread levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for formwork to sides and soffits of beam, lintel rough finished surfaces etc. complete all as specified and directed.

M&L for form work to soffits of suspended slabs, such as roof slabs and similar work; not exc. 200 mm thick for flat rough finish surfaces complete all as specified and directed.

M&L RCC M-25 design mix (using 20 mm graded stone aggregate.) in footings & plinth beams etc. complete all as specified and directed.

M&L RCC M-25 design mix (using 20 mm graded stone aggregate.) in columns etc. complete all as specified and directed.

M&L RCC M-25 design mix (using 20 mm graded stone aggregate.) in roof beams & lintel beam etc. complete all as specified and directed.

M&L RCC M-25 design mix (using 20 mm graded stone aggregate.) in roof slabs supported on walls etc. complete all as specified and directed.

M&L mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia. complete all as specified and directed.

M&L mild steel TMT bar 5mm dia and over upto and including 10mm dia cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia. in stirrups, spacers and binders. complete all as specified and directed.

M&L for precast cement concrete block masonry of grade C-5 having density not less than 1800 kg/cum and 28 days average minimum compressive strngth of block should be 5 N/sqmm as in walling set in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub-Class "B" bricks staright or curved or plan any redius in half brick thick wall built in CM 1:4 complete all as specified and as directed.

M & L rendering 10mm thick in CM 1:4 on wall surface to receive wall tiles complete all as specified and as directed.

M & L rendering 5 mm thick in CM 1:3 on concrete surface of ceiling & finished even & smooth without using extra cement.

M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja mixed with water proofing compound @ 3 % by the weight of cement surface finished even and smooth without using extra cement.(WPC shall be measured and paid seperately)

Supply only integral water proofing compound.

M&L PCC type D-2, 1:4:8 ( using 40 mm graded stone aggregate) in sub-base 75 mm thick as in sub base complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

M&L Forming 12 mm thick expansion joint with pre-formed filler and top 30 mm primed and sealed with sealing compound Grade ‘A’ all as specified for thickness of concrete slab 75mm complete all as specified and directed.

S & F Steel ventilator with top hunge shutter incl hinges, steel peg stay complete all as specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.56mm nominal dia and average width of aperture 1.18mm etc. complete all as specified and directed.

S & F Figured glass 3 mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane etc. complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet reinforced with MS square tube etc. complete all as specified and directed.

S & F PVC factory made solid, PVC moulded prelam sheet on the front face & 2mm prelam PVC sheet on back face door shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design in framing at site as per specification & drawing.

S & F extruded aluminium alloy butt hinges with galvanized mild steel hing pin, 100 mm size etc complete all as specified and directed.

S & F aluminum handle cast type anodized size 125mm etc complete all as specified and directed.

S & F aluminium anodized barrel tower bolts of extruded section length of bolts 200mm etc. complete all as specified and directed.

S & F vitreous china IWC Orissa pattern white size 580 x 440 mm with integral foot rests with ‘P’ or ‘S’ trap including provn of lime concrete bedding complete all as specified and directed.

Supplying and fixing 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supplying and fixing 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F PVC low level flushing cistern 10 litre capacity including PVC bend pipe handle & Float Value, brackets etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified and directed.

M & L GI tubing 20 mm dia medium grade galvanized with all fittings and fixed to brick/stone wall or laid in floor complete all as specified and directed.

M & L GI tubing 15 mm dia medium grade galvanized with all fittings and fixed to brick/stone wall or laid in floor complete all as specified and directed.

S & F gate valve with Iron wheel head screwed both ends for Iron pipe 25 mm dia etc. complete all as specified and directed.

S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore etc complete all as specified and directed.

Supply, hoisted and fixed in position rotational moulded polyethylene triple layered water storage tanks (cylindrical with closed top) capacity 1000 ltrs complete all as specified and directed.

S & F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

Cutting into existing manholes for conncting new drains 100 mm dia pipe, making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement conrete 1:2:4 type B-1 smooth finished , and reforming benching as reqd. complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for SGSW drain pipes laid in trenches of 150 mm internal diameter of pipe and jointed as specified complete all as specified and directed.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate as in sub-base complete all as specified and directed.

M&L for rubber moulded designer Chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with white cement and pigments and pointed in coloured cement to match coloured tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed complete.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete.

Removing excavated material exc 1.50 KM & n.exc 5 KM and depositing where directed at a level n.exc 1.5 M above from starting point complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for prepration of new plastered surface of walls and applying two coat of cement base paint over a coat of alkali resistant primer on walls complete all as specified and directed.

M&L for Soakage wells of size 1.2M diaX 3.0 M effective depth excavation, in any type of soil, including intercepting chamber and screen chamber made of Brick masonary cover slab / SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size all as specified and as shown in drawing No.CEPZ/2019/TD/13 Sheet 1/2 and 2/2 dated 30 Apr 2019 and as directed by Engr-in charge.

S&F or in repairs wash hand basin, flat back 550x400mm vitreous china (white) with and including Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms), 32mm bore size, and angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing complete all as specified and as directed.

S& F PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and directed by EIC.

M&L Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and as directed.

S&F or in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed with 15 mm bore pipe complete all as specified and as directed.

M & L for Non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set in neat cement slurry and pointed in coloured cement to match coloured tiles including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 450 X300 X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed

M& L for construction 30 users of LLDPE septic tank designed to carry sewage & sullage water, excavation in any type of soil, over 75mm thick PCC 1:4:8 as in foundation PCC below tank, vent shaft, connection etc complete all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft/lose soil complete all as specified and as directed.

Excavating over areas, exc 1.5 m and n exc 3.00 m deep and getting out in soft/lose soil complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for Reinforced cement concrete pipes,150 mm bore of pipes Class NP-2, laid and jointed with collars including demolition and breaking up drain pipes (SGSW/AC/RCC) including haunching and benching set in cement mortar complete all as specified and as directed.

M&L for providing plain cement concrete 1:3:6 type C-2 (Using 40 mm graded stone aggregates) as in concrete bed to drain pipes for 150 mm bore dia including packing under haunching against the side of pipe after laid and tested etc. complete all as specified and as directed.

M&L for Reinforced cement concrete pipes, 200 mm bore of pipes Class NP-2, laid and jointed with collars including demolition and breaking up drain pipes (SGSW/AC/RCC) including haunching and benching set in cement mortar complete all as specified and as directed.

M&L for providing plain cement concrete 1:3:6 type C-2 (Using 40 mm graded stone aggregates) as in concrete bed to drain pipes for 200 mm bore dia including packing under haunching against the side of pipe after laid and tested etc. complete all as specified and as directed.

Demolition of reinforced Concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for providing RCC nominal mix (1:1.5:3) (using 20mm graded stone aggregates) in slabs supported on walls, floor slabs, roof slabs, and the like complete all as specified and as directed.

M&L rendering 15mm thick in cement mortar (1:6) on brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Supply only approved liquid integral waterproofing compound complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 mtr wide and 1.5m in depth for foundation and getting out in any type of soil complete all as specified and directed.

Removing excavated surplus soil not exc 50 m and depositing where directed at level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L for providing plain cement concrete 1:3:6 type C-2 (Using 40 mm graded stone aggregates) as in concrete bed to drain pipes for 300 mm bore dia including packing under haunching against the side of pipe after laid and tested etc. complete all as specified and as directed.

M&L for Reinforced cement concrete pipes, 300 mm bore of pipes Class NP-2, laid and jointed with collars including demolition and breaking up drain pipes (SGSW/AC/RCC) including haunching and benching set in cement mortar complete all as specified and as directed.

Cleaning of existing septic tank and screening chamber of 50 to 100 users capacity by removing water, sludge, stones and solid particles etc complete by cleaning mechanical suction equipment and disposing the same through mechanical transport and removing the same out of defence land and burried as directed.

M&L plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregates) as in surface channels and drains complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills, steps seismic and other similar bands plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, 110mm bore in any length with rubber ring joints, laid in trenches etc including taking down existing unserviceable SWR pipes and fittings complete all as specified and directed

S&F PVC (SWR) pipes, 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches etc including taking down existing unserviceable SWR pipes and fittings complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius 75 mm bore/dia complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece, single (single ' Y'), equal or unequal, 110mm bore/dia complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece, single (single 'Y'),equal or unequal 75mm bore/dia complete all as specified and as directed.

S&F in repair PVC (SWR) junction single (Single 'T') equal or unequal, 100mm bore/dia complete all as specified and as directed.

S&F in repairs PVC (SWR) junction single (Single 'T') equal or unequal, 75mm bore/dia complete all as specified and as directed.

S&F in repairs 75mm bore/dia PVC vent cowl all as specified and directed.

S&F or in repair 75 mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specificed and as directed.

S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 to 110mm bore etc complete all as specified and directed.

Cutting existing for GI steel tubing 15 or 20mm for alterations or additions from overhead tank on roof for new connection as per the site condition complete all as directed by Engineer-in-Charge.

Cutting holes through brick walls/PCC solid block walls built, in cement mortar or cement lime mortar for GI water tubing for water connection and PVC SWR waste pipes and making good the cutting portion holes by filling in cement mortar 1:3, and applying finishesh neatly as required at site condition complete all as specified and directed by Engineer-in-charge.

M&L for Glazed ceramic coloured tiles in vertical surface 200 X 300 X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10 mm thick cement plaster (1:4) as backing coat including dismantling existing wall tiles and removal from the site complete all as specificed and as directed.

Supplying and fixing 15mm bore angle Stop valves, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 32 mm bore PVC waste pipe of approved make suitable for WHB, Urinals etc complete all as specificed and as directed.

M & L GI tubing 40 mm dia medium grade galvanized with all fittings and laying in trenches complete all as specified and directed.

M & L GI tubing 25 mm dia medium grade galvanized with all fittings and laying in trenches complete all as specified and directed.

S & F gate valve with Iron wheel head screwed both ends for Iron pipe 40 mm dia etc. complete all as specified and directed.

M&L for cutting and welding of existing CI/GI pipe in trenches for fixing/inserting of valve, bends , double socket, Tee pieces, single branch, Y junction etc, for 80 mm bore of pipe complete by using nesessary cutting material such as gas cutter etc. all as directed by Engineer-in-Charge.

M&L for concealed point wiring with two single core PVC insulated unsheathed 1100 volt grade multistranded FRLSH copper conductor cable of size 1.5sqmm (Nominal area) drawn into and including PVC conduit of medium grade of required size with all fitting and accessories alongwith one single core green colour PVC insulated 1100 volts grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for One light point or one fan point or one call bell point controlled by one, one way switch including 3 mm thick hylam sheet screwed with 04 Nos cadmium coated screws & cup washers with MS concealled box mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc all as specified and as directed.

S&F 5 Amp switch piano type single pole one way.

S&F ceiling rose PVC /polycarbonate body 3 terminals with base plate ISI marked.

S&F MCB single pole 6 Amp to 32 Amps, 240 volts, 10 KA breaking capacity, 'C' curve. Make : Cat Part No. 4085-87 to 4085-95 of Legrand or equivalent from list of make as approved by GE.

S&F MCB double pole 6 Amp to 32 Amps, 415 volts, 10 KA breaking capacity, 'C' curve. Make : Cat Part No. 4086-28 to 4086-36 of Legrand or equivalent from list of make as approved by GE.

S&F MCB DB, double door, metal enclosure, SPN, 230 volts, 4 way including dismantling unserviceable one all as specified and directed. Make : Cat Part No. 5076 10 of Legrand or equivalent from list of make as approved by GE.

M & L LED building security light 15 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed. Make- CG, Cat Part No LSTP-15-CDL or equivalent from list of make as approved by GE.

S&F LED batten fitting, 20 watt, CDL, 230 Volts, 4 feet long , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos all as specified and directed. Make-HPL, Cat Part No HPLLEDT5PC20W or equivalent from list of make as approved by GE.

S&F LED batten fitting, 2'long, 09 watt,CDL 230 Volts, complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable with mounting casing box 2 nos all as specified and directed. Make-HPL Cat Part No- HLPT51509PCGCW or equivalent from list of make as approved by GE.

Supply and fix Exhaust fan 225 mm sweep Metallic Grey including all connection all as specified and as directed. Make Bajaj Cat part No 70002 or equivalent from list of make as approved by GE.

Supply and lay LT UG cable 2 core 6 Sqmm XLPE insulated armoured 1100 Volts grade heavy duty cable with PVC insulated stranded aluminium conductor laid in trenches incl indoor and out door joint all as specified and directed.

Supply only HDPE Double wall corrugated pipe (DWC) confirming to IS-14930(Part-II) of size-50/38mm including snap fit coupler as required, for cable protection complete all as specified and directed.

V.R.PRAJAPATI AND CO.

Om Construction