REPAIRS TO FLOORING, PLASTERING, INTERNAL AND EXTERNAL FINISHES, PLUMBING WORKS, SANITARY FITTINGS AND CONNECTED WORKS TO SF ACCN, MARRIED OFFICERS, JCOs AND ORs ACCN AT LAXMI TEK, QUEENS GARDEN, HARSHAN ENCLAVE AND GLOBE AREAS UNDER GE I BELGAUM

Amount

Taking down chowkhat with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n exc 4 Sqm each all as specified and directed.

M&L for 2nd class hard wood chowkhat or frames, plain, solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints, fixed in position all as specified and directed.

M&L for 30 mm thick second class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick plywood BWR 7 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats all as specified and as directed.

M&L for 19mm thick Block board, interior grade, grade 2 quality, decorative type with decorative face veneers on one side, fixed with screw to timber frame work including external teak wood lipping 6mm thick around edges including taking down existing unserviceable boards of any description and thickness and making good disturbed surfaces all as specified and as directed.

M&L for 18/19mm thick veneered particle board, interior grade, solid core, general purpose type, with face veneers of type BB fixed with screw to timber frame work including external teak wood lipping 6mm thick around edges including taking down existing unserviceable boards of any description and thickness and making good disturbed surfaces all as specified and as directed.

M&L for solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on both sides reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing all as specified and as directed.

M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of prelaminated PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing all as specified and directed

S&F stainless steel butt hinges 100mm in size, medium weight all as specified and directed.

S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro galvanised with width of flaps when open 30mm all as specified and as directed.

S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section, 150mm long all as specified and directed.

S&F aluminium handle, 'D' type, anodised 150 mm in size all as specified and directed.

S&F aluminium handle, 'D' type, anodised 75mm in size all as specified and directed.

S&F 300mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia all as specified and directed.

S&F 100mm long aluminium anodised hasp and staple, safety type with hinge pin including bolt to hinge plate fixed with screws complete all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm fixed in panel of joinery with stainless steel wire staples all as specified and directed.

S&F in repairs Mild steel powder coated curtain rods, fancy type, 25mm dia including brackets and end designer caps all as specified and as directed.

S&F in repairs fancy type brackets, mild steel with antique finish or colour with rounded fancy ends suitable for holding 25mm dia single curtain rods, fixed to wall with necessary screws including drilling and plugging the holding screws and making good the wall surfaces all as specified and directed. Make: MARVEL or equivalent

M&L for providing roof treatment with APP modified water proofing membrane with the following specifications all as specified and directed.

Removing existing roof/ chajjas treatment of any type like plastic felt/ HP tiles of any description including taking down existing plastering/ concrete of any thickness and cleaning the top surface of RCC slab with wire brush including removal of debris to a distance exc 50m but n exc 100m

Brushing with neat cement slurry @ 3Kg/Sqm on cleaned RCC slab surfaces and rendering 10 mm thick in CM 1:3 mixed with water proofing compound and finishing surfaces even and smooth without using extra cement. Note: Water proofing compound shall be measured and paid separately

Preparation of plastered surfaces by removing dust, dirt & applying oil bound bituminous primer at 0.3 litre per Sqm & providing APP modified water proofing membrane 4mm thick and weight not less than 4.5kg/Sqm reinforced with non oven polyester mat weight not less than 160gms per Sqm including min 10cm side/over lap & including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm & on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm.

NOTE: APP modified water proofing membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given IS 16540-2017/ IS 16532-2017. Contractor shall produce necessary test certificate of the manufacturer to the Engineer-in-charge before incorporation in the work. Necessary independent tests shall also be carried out by the contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work.

Roughening old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per Sqm to receive screed bed all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base for flooring including finishing the surface fair and even and demolition of existing cement concrete sub base/ floor of any description and making good the disturbed surfaces all as specified and directed.

M&L for 100 mm thick plain cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in paving, hard standing etc. and finishing the concrete surface even and fair without using extra cement and making impressions of expanded metal while the concrete is green including demolition of existing plain cement concrete of any description and size and making good disturbed surfaces all as specified and directed

M&L for coloured vitrified tiles, square or rectangular, light shade, 9 to 10mm thick, area of each tile not exc 0.36 Sqm, as in floors/ skirtings, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 including dismantling of existing unserviceable tiling alongwith cement mortar bedding (but not backing) and removing rubbish off the premises all as specified and directed.

M&L for coloured ceramic tiles, matt finished, edge cut, 7mm thick, area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 including dismantling of existing unserviceable tiling alongwith cement mortar bedding and removing rubbish off the premises all as specified and directed.

M&L for coloured ceramic tiles, matt finished, edge cut, 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 including dismantling of existing unserviceable tiling alongwith cement mortar bedding and removing rubbish off the premises all as specified and directed.

M&L for coloured ceramic tiles, edge cut, 8 to 9mm thick, area of each tile exc 0.18 Sqm but not exc 0.36 Sqm as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 including dismantling of existing unserviceable tiling alongwith cement mortar bedding and removing rubbish off the premises all as specified and directed.

M&L for coloured glazed ceramic tiles 450mm x 300mm x 7 mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces including 10mm thick backing coat in CM 1:4 including dismantling of existing unserviceable tiling alongwith cement mortar plaster and removing rubbish off the premises all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete including dismantling of existing unserviceable tiling alongwith cement mortar bedding (but not backing) and removing rubbish off the premises all as specified and directed.

M&L for machine cut Kota stone slab, 20-25mm thick, as in flooring, laid and jointed with neat slurry and pointed with grey cement slurry mixed with pigment to match the shade of the slab including bull nosing the edges, rubbing and polishing complete including 15mm thick screed bed in cement mortar 1:4 including dismantling of existing unserviceable stone tiles alongwith cement mortar bedding and removing rubbish off the premises all as specified and directed.

M&L for machine cut Cudappah stone slab, 20-25mm thick, as in flooring, platforms, etc. laid and jointed with neat slurry and pointed with grey cement slurry mixed with pigment to match the shade of the slab including bull nosing the edges, rubbing and polishing including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for machine cut granite stone slab, premium quality, any colour, 18 to 19mm thick, set and jointed with neat cement slurry laid over and including 15mm thick screed bed in cement mortar 1:4 and pointed in white cement (1:2) mixed with colouring pigments to match with the shade of slab, as in platforms/ steps, cills, etc. including rubbing and polishing and bull nosing the edges where required complete all as specified and directed.

M&L for 55 to 60mm thick machine pressed precast concrete interlocking coloured paver blocks, M-35 grade, any shape and size with glossy finish on top confirming to IS 15658-2006 including dismantling of existing unserviceable paver blocks of any description and size and removing rubbish off the premises all as specified and directed.

M&L for sand filling in floors or pavings including watering and consolidation all as specified and as directed.

M&L for plain cement concrete 1:3:6, type C1, using 20 mm graded stone aggregate, 75mm thick as in plinth protection, finishing the surface fair and even, in panels & filling joints with mortar, etc. including demolition of existing plain cement concrete plinth protection of any description and size and making good disturbed surfaces all as specified and directed

M&L for weather proof coating to external wall surfaces with Rain coat with the following specifications all as specified and directed.

The external wall surfaces shall be prepared and made free from all dust, loose particles, laitance and sharp edges, fungus, algae, organic matters, etc. including removal of debris outside of MOD premises

All wide shrinkage cracks shall be cut open and Dr. Fixit crack X paste (for cracks upto 5mm)/ Dr. Fixit crack shrink free paste (for cracks upto 10mm) or equivalent shall be filled in the cracks and finished.

All masonry wall & RCC column separation/ masonry wall & RCC beam separation shall be filled with polymer modified mortar admixed with Dr. Fixit URP or equivalent at the ratio of 1:3 with polymer dosage of 12-20%.

Over the prepared surfaces one primer coat of Dr. Fixit Primeseal acrylic water based penetrating primer or equivalent shall be applied as a bonding coat.

Over the primered surfaces water proof coating shall be applied with two coats of Dr. Fixit Rain Coat or equivalent to form weather proof and decorative coating with 80-100 micron thick and 100% elongation properties.

NOTE: Water proofing chemicals shall be procured from approved manufacturer with prior written approval of GE. Full quantity of fresh chemicals required for incorporating in the work shall be brought to site with sealed containers. Water proofing treatment shall be carried out through authorised applicator of the manufacturer and the contractor shall produce necessary certificate of authentication to the Engineer-in-charge before commence of the work.

M&L for rendering 5mm thick in cement mortar 1:3 on soffit of roof ceiling, finished fair and even without using extra cement including taking down existing cement plaster and hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement including taking down existing cement plaster and hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound all as specified and as directed.

M &L for 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of ceilings including necessary preparation of surfaces all as specified and as directed.

M&L for one coat of oil bound distemper (Acrylic distemper washable), any colour, on old distempered walls, pillasters, cornices, etc., including necessary preparation of surfaces by washing, rubbing down and stopping all as specified and as directed.

M&L for two coats of oil bound distemper (Acrylic distemper washable) on newly plastered surfaces of walls, cornices, pillasters, etc. including necessary preparation of surfaces with chalk whiting primer all as specified and directed.

M&L for two coats of oil bound distemper (Acrylic distemper washable) over a coat of primer over 1mm thick layer of wall care putty, on walls, pillasters, cornices, etc., including complete removal of existing treatment and necessary preparation of surfaces all as specified and as directed.

M&L for one coat of cement based paint on old cement painted walls, pillasters, cornices, etc., including necessary preparation of surfaces all as specified and as directed.

M&L for two coats of cement based paint, any colour, on newly plastered surfaces of walls, pilasters, cornices, etc., over a coat of alkali resistant primer including necessary preparation of surfaces all as specified and directed.

M&L for two coats of weather proof exterior emulsion on old decorated surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc., including necessary preparation of surfaces by washing, rubbing down and stopping all as specified and as directed.

M&L for one coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed.

M&L for one coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed.

S&F 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors including taking up or down existing unserviceable PVC/ GI tubes of any grade and making good disturbed surfaces all as specified and directed.

S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors including taking up or down existing unserviceable PVC/ GI tubes of any grade and making good disturbed surfaces all as specified and directed.

S&F 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors including taking up or down existing unserviceable PVC/ GI tubes of any grade and making good disturbed surfaces all as specified and directed.

Fixing only 15mm bore GI tubes of any grade, fixed complete to walls, ceilings or laid in floors including taking up or down existing GI tubes and making good disturbed surfaces all as specified and directed.

Fixing only 20mm bore GI tubes of any grade, fixed complete to walls, ceilings or laid in floors including taking up or down existing GI tubes and making good disturbed surfaces all as specified and directed.

S&F in repairs 15 mm bore 2 way Bib tap, long body, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed. Make: Cat No. FUS 29041 of JAQUAR or equivalent model in JOHNSON/ CERA

S&F in repairs 3 way mixer tap for mixing hot and cold water, fancy type, brass chromium plated screwed down for 15mm bore GI pipe all as specified and directed. Make: JAQUAR/ JOHNSON/ CERA

S&F in repairs 15mm bore PTMT bib taps, standard type, (Minimum weight 90gms) any colour, high pressure screwed for iron pipe all as specified and as directed.

S&F health faucet, brass chromium plated with 1m long flexible PVC tube and wall hook all as specified and as directed. Make: Cat No. 563 of JAQUAR or equivalent model in JOHNSON/ CERA

S&F in repairs 15mm bore stop valves, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions all as specified and as directed.

S&F in repairs 15mm bore stop valves, fancy type, brass chromium plated, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions all as specified and as directed.

S&F in repairs 15mm bore stop valves, fancy type brass CP, with long shank and cup (concealed type), screwed down high pressure, screwed both ends for iron pipe for unions all as specified and as directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm, excluding taps, waste chain and plug and porcelain stopper but including brackets etc complete all as specified and directed.

S&F in repairs vitreous china squatting pan, Orissa pattern of size 580 x 440 mm, white, with integral foot rest (excluding flushing cistern) including 'P' or 'S' trap etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including 'P' or 'S' trap, plastic water closet seat of any colour as approved by GE, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, fixing bolts etc, connecting to drain pipe and flushing pipe including provision of PVC flush pipe complete all as specified and as directed.

S&F in repairs syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe etc complete all as specified and directed.

S&F in repair 1mm thick stainless steel sink, overall size 495x420mm, bowl size 410x330x160mm, with plug, washers & wastes incl bedding in cement mortar, fixing cantilever brackets & connecting union to pipe all as specified and as directed.

S&F in repairs brass chromium plated towel rail 600mm long with and including Chromium plated brass screws & wooden/ plastic cleats all as specified and as directed.

M/s. VIJAY ELECTRICALS

SHRI.H.R.PATIL

ASHOK M RAJGOLKAR

SANJAY ELECTRICALS

SAMARTH ASSOCIATES

DHANSHRI ENTERPRISES

RAJENDRA KRISHNA SARAF

M/S VISHWAROOP ELECTRONICS AND ELECTRICALS

M/S MAHADEV M PATIL