VARIOUS BR SERVICES FOR OTM AND PROCESS BLDG AT TECHNICAL AREA AT HEMRL UNDER GE RD PASHAN

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Material and labour for MS angle posts, struts in fencing including cutting to shape as directed and drilling holes, notching for wire etc, flat iron fillets, bolts etc including all necessary drilling, bolting, riveting, welding etc and similar work conforming to Fe 290 grade E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

Material and labour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm & n exc 10cm long complete all as specified and directed.

Supply and fix in repair galvanised 2 strand steel barbed wire 2mm dia barbed with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standared rail, straining bolt including provn of galvanised MS wire, staples or steel pins etc complete all as specified and directed. Note: Each line shall be measured and paid separately.

Supply and Fixing in repair of 610 mm Super Reinforced Barb Helix Coil along with three nos. of Harpoon Ripper horizontal tension strands on existing "Y"angle posts over the boundary wall.The three tension strands should be fixed at the end of the three arms of the existing "Y" angle and the helix of 700mm should be placed in between these three wires so as to circumscribe the angle . The three straight strands of SRPBT should be fixed to these angles after applying the required tension by Tensioner Machine and fixed by Box clipping (3/8") at tensioning points so that these wires retains the tension. The helix of RPBT is to be fixed in such a manner that it toches at least one of the three tensioning wires passing along the three arms of the "Y" angle with minimum 6 spirals per Running meter of fence, thus circumscribing the angle with equal clip to clip spacing . One number "J" clipping is to be done along the length of the fence at one meter interval for fixing the coils alternately to the individual strands with minimum three "J" clippings at each joint of two corresponding coils or horizontal strands complete all as specified and directed.

Excavation in trenches; not exc 1.50 m depth & n. exc1.50m wide for foundation & getting out in soft/loose of soil complete all as specified and directed.

Returning filling including spreading, leveling watering & Well ramming in layers n.exc 25 cm thick in soft/disintegrated rock complete all as specified and directed.

Removing excavated material in soft/ loose soil exc 250m & not exc 500m and depositing where directed at a level n. exc 1.50m above starting point complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling mass & concrete complete all as specified and directed.

Material and labour for Applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the old membrane and finally applying two coats of aluminium paint @ 0.10 ltrs/Sqm complete all as specified and directed by Engineer In Charge.

Material and labour for dismantling and taking out existing strip type lightening arrestor and refixing the same in position with fixtures and fittings and making good disturbed portion on roof surfaces complete all as specified and directed.

Dismantling stone slabs and tiles including bedded and pointed in any type of mortar any thickness & any description complete all as specified and directed.

Material and labour for Crushed stone sand cushioning below interlocking paver block including spreading and levelling complete all as specified and directed

Material and labour for Machine pressed precast rubber moulded concrete coloured interlocking paver block any shape and size confirming to IS 15468-2006 of 60 mm thickness with grey cement and pigment M-35 Grade complete all as specified and directed.

Material and labour for Granite slab 20mm thick machine cut,in cooking platform laid over and including screed bed 15 mm thick in CM 1:4 jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed.

Material and labour for Rounding to edges of Granite slab 20 mm thick on one edge, such as in , cills, cooking platform,etc and other similar situations complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 18 to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing laid over and including 15mm of screed bed in CM 1:6 complete all as specified and directed.

Material and labour for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

Material and labour for factory made precast chequered cement concrete tiles, size 30cmx30cmx22 to 25mm, hydraulically pressed, glossy finished, set jointed in neat cement slurry and pointed with white cement and coloured pigment to match the surface laid over and including 20mm thick screed bed, in CM (1:6) , complete all as specified and directed. NOTE : Shade of the tile shall be as directed by Engr-in-charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed

Material and labour for 450mm x 300mm x7 mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Material and labour for Non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15mm thick screed in CM 1:6 complete all as specified and directed.

Material and labour for Double charged vitrified ceramic light shade tiles 8 to 9 mm thick (square/Rectangular) polished, area of each tiles exceeding 0.18 sqm but not exc 1.00 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including and over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for providing cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) for filling in pressed steel frames and other similar items etc complete all as specified and directed.

Material and labour for 75mm thick cement concrete type C-1, 1:3:6 using 20mm graged aggregate as in plinth protection complete all as specified and directed.

Material and labour for cement concrete 1:2:4, type B -1, (20mm graded stone aggregate) 100 mm thick as in hardstanding complete all as specified and directed.

Material and labour for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' thickness of slab 100mm complete all as specified and directed.

Material and labour for75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) as in sub base etc complete all as specified and directed.

Material and labour for 25mm thick cement concrete 1:2:4, type B0, using 12.5 mm graded stone aggregate finished even and fair complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,gutter , fixed with self tapping screws complete all as specified and directed.

Fixing only pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Material and labour for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Fixing only 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Demolition of brick work/stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks, complete all as specified and directed.

Material and labour for Precast cement concrete block masonry exceeding 10 cm in width with solid block of PCC(1:3:6) type C1 and setting in CM 1:6 complete all as specified and directed.

Material and labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

Material and labour for walling of random rubble, brought upto course, well bonded, bedded and solidly hearted, built in CM (1:6) but except stone including removing mortar and cleaning the stone, stacking for measurement and removal and disposing of debris etc complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression 20 mm on face from straight edge held against the dressed surface n exc. Granite or Trap Stone complete all as specified and directed.

Material and labour for keyed pointing to random rubble, uncoursed or brought upto courses in CM 1:3 complete all as specified and directed.

Taking down rolling shutter any type including top covers complete sizes of Shutter area upto 15 Sqm complete all as specified and directed.

Taking down steel collapsible gate of any type and Area of gate n.exc 10 Sqm complete all as specified and directed.

Supply and fix Roof trusses (framed), trussed, purlins, post, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe-410 W (Gde-E-250) quality A complete all as specified and directed.

Supply and fix Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other confirming to Fe 410-W (Gde- E- 250) quality-A . Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintle hinge or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; incl errection and fabrication also fastening and fixing complete all as specified and directed.

Suppy and fix Steel rolling shutters, Thickness of laths in 1.00 mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle.complete all as specified and directed.

Supply and fix collapsible steel gates top hung consisting of channel pickets, pivoted flat bars top and bottom runners brass handles etc as specified erected in position and securing runners with holdfasts and brackets complete all as specified and directed.

Taking down chowkhats / frame including shutterrs or Steel windows / ventilators (without taking off shutters from the frame) exc 1.0Sqm & not exc. 2 Sqm complete all as specified and directed.

Taking down shutter of size exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed

Material and Labour for 35 mm flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides face is covered with decorative face veneers with lipping/ frame to match complete all as specified and directed.

Supply and fix in repair powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, floor door spring, ruber neoprene packing,handles 2 Nos in each door, hinges, suitable handle anodised aluminum snap beading screws etc. complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

Material and labour for rough cast wired glass n exc 0.5 sqm, 6.4mm thick and glazing with oil putty in square complete all as specified and directed.

Supply and fix 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane complete all as specified and directed.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Material and labour for one coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation complete all as specified and directed.

Material and labour for preparation of new or previosly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

Taking down and refixing in same position Shutters of any description exceeding 1 sqm but not exceeding 2sqm each, including easing and repair works , complete all as specified and directed.

Supply and fix factory made Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement.complete all as specified and directed

Supply and fix Mild steel flat iron as in hold fasts or similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fix 300mm long aluminum alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section.complete all as specified and directed.

Supply and fix extruded aluminium alloy handles, fabricated type anodised 150 mm size complete all as specified and directed.

Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Taking down cement plaster on brick or stone walls or concrete surfaces etc incld raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for rendering 15mm thick in two layers on fair faces of brick work or concrete surfaces 10mm in CM 1:6 and top layer 5mm thick in CM 1:4 mixed with integral water proofing compound finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately)

Material and labour for rendering 15 mm thick in CM 1:6 on internal surfaces of brick wall finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 5 mm thick plastering in CM 1:3 on ceiling and finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, complete all as specified and directed.

Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper over a coat of 3mm thcik wall interior wall care putty and a coat of primer complete all as specified and directed

Material and labour for preparation of newly plastered wall surface and applying two coats of acryalic weather proof exterior emulsion paint over a coat of 3mm thick exterior wall care putty and a exterior parimer on wall complete all as specified and directed

Material and labour for preparation of old ceiling surfaces and applying two coats of white wash complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for complete removal of existing treatment of Surfaces of any description wood, steel, iron, concrete, brick, stone, etc including preparation and applying of two coat of fire resistance paint over and including a coat of primer complete all as specified and directed.

Material and labour for welding in repairs thickness of metal exc 6mm but n exc 9mm, exc 2.5cm but n exc 5cm in length complete all as specified and directed.

Supply and Fix in repairs 20mm gun metal gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply and Fix in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min wt 210 grams) complete all as specified and directed.

Taking up or down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store .complete all as specified and directed

Supply and Fix 15mm bore Tubes Medium grade galvanised with necessary fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

Fixing only steel tubes, of 15mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store .complete all as specified and directed

Fixing only GI tubes, of 20 mm bore any grade,(medium) to walls and ceilings or laying in floors complete all as specified and directed.

Supply and Fix 20 mm bore Tubes Medium grade galvanised with necessary fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

Dismantling water tanks exceeding 250 liters and not exceeding 500 litres complete all as specified and directed

Dismantaling water tanks exceeding 500 but not exceeding 1000 litres complete all as specified and directed

Supply and fix 500 Litres ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

Supply and fix 1000 Litres ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

Disconnecting existing tanks of capacity exc. 250 litre and n. exc 500 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified & as directed.

Disconnecting existing tanks of capacity exc.500 litre and n. exc 1000 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified & as directed.

Taking down eaves gutters and rainwater pipes,PVC (SWR) pipes ( any size or pattern ) including all fittings heads ,shoes, bends, and removal to store complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary scaffolding upto the height of building from ground level complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) bend complete all as specified and directed.

Supply and Fix in repairs Vitreous China wash basin, white, flat back, size 580mm x 450mm including brackets, including cutting for and pinning in ends of brackets or erecting stand and including 32mm bore waste coupling of PTMT (half or full threaded) complete all as specified and directed.

Supply and fix in repair long body 15mm bore chromium plated Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule (minimum weight 550 grams) complete all as specified and directed.

Supply and Fix in repair 15mm bore fancy type long(swan) neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Min wt 650 grams) complete all as specified and directed.

Supply and Fix in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and Fix in repairs brass chromium plated tubular towel rail 20mm dia complete all as specified and directed.

Supply and Fix in repairs angular stop cock copper alloy, screwed down, high pressure, screwed both ends fancy type chromium plated for 15mm bore Min wt 400 grams complete all as specified and directed.

Supply and Fix in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed.

Supply and Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap complete all as specified and directed.

Supply and fix in repair, 10 litre capacity low level PVC valveless, syphonic action type flushing cistern(dual system), white, with inlet, ball valve, flush pipe, PVC connection 15 mm dia and 450 mm long float and handle including bracket complete all as specified and directed.

Supply and Fix in repairs PVC connection pipe 15mm dia and 450mm long complete all as specified and directed.

Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc. including all pipe fittings. complete all as specified and directed

Supply and fix in repair 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fix in repair 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight 32 mm ,45gms, suitable for vitreous china wash basin complete all as specified and directed.

Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with and including chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix in repairs swivel shower chromium plated with shower arm 15 mm size, 195 mm long with bend of 45º with flange fixed to 15 mm dia GI tubing, shower roses with or without swivel joints ,125mm size ,including fixing to steel pipe or union complete all as specified and directed

Supply and fix in repairs toilet paper holder of chromium plated fixed to walls with and including chromium plated brass screws complete all as specified and directed.

Supply and fix in repairs 1.2metre long chromium plated health faucet including holder fixed to wall. complete all as specified and directed

Supply only liquid water proofing compound all as specified and as directed

Supply and fix in repairs plastic water closet seat cover, white colour, soft closing type, with and including mild steel chromium plated or aluminium hinging device complete all as specified and directed.

Providing and Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Fine Fissured (Bevelled Tegular) Edge Tiles With Armstrong 15mmExposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.6, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for Green Building application, with Recycled content of 31%. The tile shall be laid on ArmstrongSuprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5 Kgs/M2 & minimum pull out strength of 100 Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system including taking down existing false ceiling and ceiling tiles complete all as specified and directed.

Dismantling wall and ceiling board any thickness and Fixing only false ceiling particle board/tiles for insulation and acoustic purposes, 60x60 cm in size fixed on old frame work snap grid complete all as specified and directed.

Demolition & breaking up drain pipes (salt glazedwere/AC/RCC ) set in CM,dia of pipe 150 mm dia complete all as specified and directed at site.

Material and labour for PCC (1 : 3: 6 ) type D2(using 40 mm graded aggregate) as in bed to drain pipe including packing under & haunching against the sides of pipes of 150 mm dia after they are laid tested complete all as specified and directed. Note: Thickness of bed below pipe shall be 10cm and width shall be outer dia of pipe plus 30cm.

Material and labour for reinforced concrete pipes, class NP2, laid and jointed complete with collars of dia 150 mm complete all as specified and directed.

AJAY ENTERPRISES

M/S SAMRUDHI CONSTRUCTION

M/S NILESH BUILDERS

S.K.HARAL

sanjay m. suryawanshi