REPAIRS AND MAINTANANCE AND PAINTING OF STEEL FURNITURE UNDER BSO AT GE FAIZABAD

Amount

A) Removal of following existing unserviceable components of various MES F/DB/FD/TP/MAP furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges,denting, placing everypart in-tact , as applicable as per drgs. B) Work will be executed where the furniture exist in different User Units of GE Faizabad including BSO's Furniture Yard as directed by Engineer-in-Charge

Table Office Officer Steel

S&F Legs, as per drg

S&F Lock of drawer as per drg (Make-GODREJ/HETTICH/LINK)

Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg.

S&F Stiffeners as per drg

S&F PVC Shoes std quality all as per drg

S&F Welding the joints of legs / square tube as per drg

S&F Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Make: Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Table Office Clerk Steel :

S&F Legs, as per drg

S&F Lock of drawer as per drg (Make-GODREJ/HETTICH/LINK)

S&F Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg.

S&F Stiffeners as per drg

S&F PVC Shoes std quality all as per drg

S&F Welding the joints of legs / square tube as per drg

S&F Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Make: Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

Almirah Large Steel with shelves or 1/2 H 1/2S:

S&F Brass/Steel 6 lever locks (Make-Godrej/Link/Hettich) as per drg

S&F CP Handle as per drg

S&F Legs as per drg

Repairs to door as specified including replacement of hinges

Repair/adjustment to existing shelf including welding as per drg

S&F Shutter/door as per drg.

S&F Locking device complete including rod

S&F Shelf as per drg

S&F CP Conduit pipe as per drg

Almirah Medium / Small Steel

S&F Brass/Steel 6 lever locks (Make-Godrej/Link) as per drg

S&F CP Handle as per drg

S&F Legs as per drg

S&F Repairs to door as specified including replacement of hinges

S&F Repair/adjustment to existing shelf including welding as per drg

S&F Locking device complete including rod

S&F Shutter as per drg.

S&F Shelf as per drg

S&F CP Conduit pipe as per drg

Teapoy Verandah

S&F Rubber/PVC shoe std quality as per drg

S&F Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

S&F Flat iron/conduit section complete aasembled set to be provided as per drg.

Table 3x2 with and w/o drawer& Table 3'x3'

S&F Welding wherever required as directed by E-in-Incharge

S&F Top 18 mm thick of size 3'x2' made of MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

S&F Top 18 mm thick of size 3'x3' made of MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.

S&F Repairs to Drawer by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg.

S&F Rubber shoe std quality as per drg

S&F Lock of drawer as per drg (Make-GODREJ/HETTICH/LINK)

Chair Steel Tubular with arms :

S&F Second class Hard wood seat frame including cane work two coats enameled painting over a coat primer and putty fitting in position by welding plate below the seat along with nut and bolt all as per drg

S&F Second class Hard wood back frame including cane work two coats enameled painting over a coat primer and putty fitting in position all as per drg

S&F PVC Arm rest as directed by EIC

S&F Rubber cap for conduit pipe as per drg

S&F Welding wherever required as directed by E-in-Incharge

Chair Steel Tubular without arms :

S&F Second class Hard wood seat frame including cane work two coats enameled painting over a coat primer and putty fitting in position by welding plate below the seat along with nut and bolt all as per drg

S&F Second class Hard wood back frame including cane work two coats enameled painting over a coat primer and putty fitting in position all as per drg

S&F Rubber cap for conduit pipe as per drg

S&F Welding wherever required as directed by E-in-Incharge

Chair Verandah :

S&F Conduit section any member of MS conduit pipe 16G, 19mm dia as per drg.

S&F Welding joints of leg of 19/20mm MS tube & other joints as per drg as directed by EIC

S&F Hard rubber shoes as per drg

S&F Removing old unserviceable pvc frame from chair verandah map and S &F new seating and back frame of chair verandah map as specified and directed by by EIC/GE

S&F Removing old unserviceable cane from chair verandah & recaning the chairs etc with approved new plastic cane 4 mm wide half round as per Matt Pattern all as specified(colour of cane shall approved by EIC/GE)

Locker Steel

S&F CP handels as per drg

S&F S/S Hasp & Staple , rest as per drg

S&F Repairs to door/sides including replacement of hinges

S&F Shutter/door as per drg.

S&F Legs as per drg

S&F CP Conduit pipe as per drg

S&F Shelf as per drg.

S&F Brass/Steel 6 lever locks (Make-Godrej/Link/hettich) as per drg

S&F bottom Drawer complete as per drg.

S&F complete Locking device complete including rod and other device

Charpoy IP Ply Top

S&F 12 mm thick plywood top BWP grade (Make-Century ply/Greenply/Archidply) as per existing shape and size with 8 Nos shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed

S&F Hard rubber shoe std quality as per drg

S&F Welding work wherever required as directed by EIC

Chair Computer/Revolving/Executive Chair

S&F new seat made of 12mm thick hot pressed plywood with fabric polyproplene /acrelic (range of fabrics not less than Rs 300/ Rm)and mouled polyurethene foam 40 Density with PVC lipping all round complete all as shown on drawing.

All as above but back complete.

S&F PU arms as per drg

Complete pedestal assy std quality complete all as per drg and directed.

Supplying and fixing new twin wheel castors of required dia complete all as directed.

Supply & fix new chrome free cylinder tube shall be fixed complete all as per drg and directed.

Supply & fix new Locking lever assembely as shown in drawing complete all as directed.

S&F new superior quality cover cloth covering back,seat and arm as directed by engineer in charge in executive Chair

Charpoy GI pipe ply top

S&F 12 mm thick plywood top BWP grade (Make-Century ply/Greenply/Archidply) as per existing shape and size with 10 Nos shunken nut/bolts,12 mm x 6mm thick 1st class teak wood beading half round along with the edges of the plywood and round at corner fixed with fevicol and headless nails ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed

S&F 25mm mild steel square tube 20 cm long not less than 16 gauge thick each welded to GI Charpoy pipe in four corner to support. Duly painted complete all as specified and directed.

S&F stiffener in replacement of 25 mm mild steel square tube 80 cm long not less than 16 Gauge in thickness each welded to GI Charpoy pipe complete all as specified and directed.

S&F in replacemet of long rail of 32 mm dia Medium grade GI pipes ISI Marked all as specified and shown on drg Make of pipe Jindal/Prakash/TATA complete all as specified and directed.

Replacement of unserviceable short rail from charpoy GI pipe 32mm bore but "except pipe" including cutting threading etc as required and directed. Note : Pipe shall be used from unserviceable long rail obtained from item No 18 (d) here in before.

Replacement of unservicable legs from charpoy GI pipe 32mm dia including cutting threading etc as required and directed with bottom plug made of Sal wood and flat iron clamp 02 Nos for MNF set duly painted with two coats of black paint complete all as specified and directed.

S&F in replacement of GI 3 way elbow 32 mm dia complete all as specified and directed.

S&F in replacement of 32mm check nuts complete all as specified and directed.

Welding work wherever required as directed by EIC

Replacement of old us Nylon newar from Charpoy GI Pipe, tightening of loose components of complete charpoy and S&F new plywood top 12mm thick BWP grade (Make: Greenply/Centuryply/Archidply) ISI marked of required size fixed with mild steel galvanised iron nuts and bolts of required size and suitable length, 12 mm x 6mm thick 1st class teak wood beading half round along with the edges of the plywood and round at corner fixed with fevicol and headless nails, S&F three stiffeners 900 mm long made out of MS flat iron, 40x5 mm duly painted with two coat of black colour synthetic enamel paint over a one coat of red oxide primer to be fixed over the long rails by drilling holes in flat iron and long rail by two nos of semi circular top of 6mm dia 65mm long nut and bolts. 10 nos Nut and bolts with semi cirular top of 6mm dia and 65mm long with steel washers to be used (03 nos at each long rail, 02 nos at each short rail) and 06 nos nuts and bolts with semi circular top of 4 mm dia and 35 mm long with steel washers to be used (02 nos at each flat iron in between long rail) for fixing of plywood top complete all as directed by Engineer-in-Charge.

Charpoy IP folding

S&F 12 mm thick plywood top BWP grade (Make-Century ply/Greenply/Archidply) as per existing shape and size with 10 Nos shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed

S&F Hard rubber shoe std quality as per drg

Welding work wherever required as directed by EIC

Table Dinning OR A/top

S&F Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly fixed with 1mm stainless steel to be fixed as table top all as specified and directed by EIC/GE.

S&F Leg/Stiffner/short rail of MS 25mm square tube of 1.6mm thick complete all as specified and directed.

S&F Long Rail/middle support complete all as specified and shown on drg and as directed.

S&F Welding wherever required as directed by E-in-Incharge

Trestle Store Room

Taking out old U/S leg from Trestle store room (wooden) and S&F new wooden leg of secton size 100x100mm 2nd class hardwood SAL made to shape, including treating with two coats of creosote oil, complete all as shown on drawing as spectified and directed by Engineer in charge.

Taking out old unserviceable long rail from trestle store room and S&F new long rail of section size 2440x100x100mm 2nd class hardwood SAL made to shape, including treating with two coats of creosote oil, complete all as shown on drawing as spectified and directed by Engineer in charge.

Taking out old unserviceable short rail from trestle store room and S&F new short rail of section size 600x100x100mm 2nd class hardwood SAL made to shape, including treating with two coats of creosote oil, complete all as shown on drawing as spectified and directed by Engineer in charge.

Taking out old unserviceable long middle rail from trestle store room and S&F new long middle rail of section size 2040x100x100mm 2nd class hardwood SAL made to shape, including treating with two coats of creosote oil, complete all as shown on drawing as spectified and directed by Engineer in charge.

REPAIR TO CHAIR STEEL PADDED WITH ARM (TP).

Taking out old u/s Seat of Chair Steel Padded with arm and S&F new Seat of size 450 mm x 450 mm, made of 12mm thick hot pressed plywood with fabric polyproplene /acrelic (range of fabrics not less than Rs 300/ Rm)and mouled polyurethene foam 40 Density with PVC lipping all round complete all as shown on drawing.made out of 9mm ply wood at bottom and cushion with cover, complete all as shown on drawing as specified & directed by Engr-in- Charge.

All as per item no. 18.01 but but for back of chair steel padded with arm

Taking out old fabric from back and seat of the chair and S&F new fabric polyproplene /acrelic (range of fabrics not less than Rs 300/ Rm) Note;this work is apart from ser no 18.01 & 18.02

Taking out old u/s Padded arm hand rest of Chair Steel Padded with arm hand rest and S&F new Padded arm of size as specified, complete all as shown on drawing as specified & directed by Engr-in- Charge.Welding :-Gas Welding/welding of joints of Mild Steel Pipe and flat iron frame complete and supply the damaged part all as shown on drawing as specified & directed by Engr-in- Charge.

Welding :-Gas Welding/welding of joints of Mild Steel Pipe and flat iron frame complete and supply the damaged part all as shown on drawing as specified & directed by Engr-in- Charge.

TABLE CENTRE BRASS LEG WITH GLASS (FD-375)

Taking out old broken/unserviceable glass top of size 1200mm long and 600mm wide and S&F new Glass top for Table Centre Brass leg with glass shall be of 10mm thick plate tined glass (white colour) with corner rounded as shown on drawing.

Taking out old broken leg (complete Set including entire frame) S&F new brass leg (complete Set including entire frame)

Taking out old broken/unserviceable Vaccum rubber shoes and S&F new Vaccum rubber shoes as shown on drawing.

A) M&L for painting two coat of synthetic enamel paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, all are of MES pattern viz F/FD/DB/MAP series or Similar items including removing of dust, dirts,dents etc and removing of existing paint both internally & externally , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge. B) Work will be executed where the furniture exist in different User Units/Md accns of GE Faizabad including BSO's Furniture Yard as directed by Engineer-in-Charge

S&F Almirah Steel Medium/Small

S&F Almirah Steel Large

S&F Book Case Steel

S&F Charpoy IP Hard Top

S&FChair Steel Tubular with and w/o arms

S&F Chair Verandah

S&F Locker Steel

S&F Table office officer steel

S&F Table Clk steel

S&F Teapoy Varandah

S&F Table 3x2 with and w/o drawer & Table 3'x3'

S&F Charpoy IP folding

S&F Rack steel any type/Book Shelf open large

S&F Table dinning OR A/top

S&F Chair Steel Padded with arm

S&F Trestle Store room iron

S&F Trestle Store room

G S ENTERPRISES

M S Enterprises

Supreme Builders

Sheo Prasad