Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.8 LAccepted-AOC GORAKHPUR UP 273001 | GORAKHPUR | GORAKHPUR | UTTAR PRADESH | 273001 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹6.0 L+₹21,096.50 (3.64%)Rejected-Finance H N 131 GOPLAPUR NEW SHIVPURI GOPLAPUR GORAKHPUR UTTAR PRADESH 273016 | GORAKHPUR | UTTAR PRADESH | 273016 | L2 | Rejected-Finance 2ND LOWEST | |
| 3 | L3₹6.2 L+₹44,357 (7.66%)Rejected-Finance JHARIA BENIGANJ HARDOI | BENIGANJ | HARDOI | UTTAR PRADESH | L3 | Rejected-Finance 3RD LOWEST |
Tender Value
Refer Docs
EMD Value
₹6,000
Closing Date
21 Jul 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SUPERINTENDING ENGINEER
ELECTRICITY URBAN DISTRIBUTION CIRCLE, BUNGLOW NO.-9, OLD POWER HOUSE COLONY, RAILWAY STATION ROAD, GORAKHPUR
Work against sanctioned package
2022_PVVNV_714430_1
23/EUDC(G)/2022-23
Open Tender
Electrical Works
Lump-sum
60 days
AREA OF EUDD-I/IV GKP
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
SUPERINTENDING ENGINEER
₹6,000
19 Sept 2022
12 Jul 2022
22 Jul 2022
12 Jul 2022
21 Jul 2022
12 Jul 2022
Amount
fo|qr uxjh; forj.k [k.M&izFke xksj[kiqj ds vUrxZr tek ;kstuk esa Lohd`r iSdst la[;k 58@2022&23 ¼15osa foRr vk;ksx ds vUrxZr cM+s uydwi okMZ la0 30] VªkaliksVZ uxj egsok] xksj[kiqj ij 25 fd0ok0 ds la;kstu gsrq fo|qrhdj.k dk dk;Z½ ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&
Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-
63 KVA Transformer
ST Pole 11 mtr long
11 KV Cross arm
MS Top Channel (125x65x2240) mm
MS angle (Dropper) 100X50X2028X mm
MS angle 75X75X6X2028 mm with clamp & bolts & nut (T/F base)
11 KV pin Insulator with pin
11 KV Dise Insulator with fitting
ACSR Weasel conductor
11 KV Fuse set
Stay complete (Stay rod 16x1800 mm stay wire 5 kg stay clamp bolt & nuts)
Earthing complete
MS Channel 125x65x1300 mm (T-off)
F Bracket with nuts & bolts
Supply of following material/fitting complete in all respect :-
Cross arm holding clamp with nuts & bolts
Clamps for T-off with bolts & nuts
holding clamp for top dropper channel Fuse set etc with nuts & bolts
Nuts & bolts of different sizes
Cu Z clamp
Al Lugs
The excavation of 2 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.
The excavation of 1 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.
Painting of Pole by double coating Aluminum & Red oxide paint. Paint will be provided by contractor
Earthing of ST Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO Norms.
Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with Nozelling and binding of stay wire (Complete work)
Laying, stringing, sagging, binding and jumpering of ACSR Weasel conductor for LT/HT Line with fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts off size as per required.
Erection of Fuse set
Chemical earthing of Transformer (Body+Neutral) as per IS Code 3043 - 1987 specification (Materials will be provided by contractor)
Fabrication, errection, commissioning & Testing of 63 KVA T/F on Double Pole with all accessories including make its LT and HT connection. All necessary materials such as Holding clamp, Al.Lugs (Confirming to IS 8309), Z Clamp, Nuts & Bolts will be supplied by the Contractor.
fo|qr uxjh; forj.k [k.M&izFke xksj[kiqj ds vUrxZr tek ;kstuk esa Lohd`r iSdst la[;k 59@2022&23 ¼Jh ,0ds0 flag okLrs Hkkjrh; ,;jVsy fy0] iz'kkUr Vkoj] VªkaliksVZuxj] xksj[kiqj ds Hkkj o`f) ds mijkUr vko';d fo|qrhdj.k dk dk;Z½ ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&
Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-
11 KV XLPE 3x70sq mm
Jointing kit for 11 kv XLPE 3x70 sq mm
11 KV CT (20/5A)
11 kv CT/PT metering pole mounting unit (20/5A)
11 KV Electronic TVM Meter
Supply of following material/fitting complete in all respect :-
Holding Clamps with nuts & bolts
Nuts & bolts of different sizes
G.I pipe 4' dia
Laying and dressing of under ground 11 KV XLPE 3x70 sq mm by digging method using bricks and sand etc as per RESSPO norms.
Errection of 11 KV XLPE Cable 3X70mm² Jointing Kit with complete work
Erection of 11 KV CT & 11 KV CT/PT Pole Mounting Unit with 11 KV TVM Meter
Earthing of PPMC
Earthing of CT unit
fo|qr uxjh; forj.k [k.M&prqFkZ xksj[kiqj ds vUrxZr tek ;kstuk esa Lohd`r iSdst la[;k 61@2022&23 ¼15osa foRr vk;ksx ds vUrxZr okMZ la0 07] jkIrhuxj i=dkjiqje esa feuh uydwi ds u;s la;kstu dk dk;Z½ ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&
Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-
25 KVA Transformer
ST Pole 11 mtr long
11 KV Cross arm
MS Top Channel (125x65x2240) mm
MS angle (Dropper) 100X50X2028 mm
MS angle 75X75X6X2028 mm with clamp & bolts & nut (T/F base)
11 KV pin Insulator with pin
11 KV Dise Insulator with fitting
ACSR Weasel conductor
11 KV Fuse set
Stay complete (Stay rod 16x1800 mm stay wire 5 kg stay clamp bolt & nuts)
Earthing complete
LT PVC Cable 3.5x35 sq mm
F Bracket with nuts & bolts
Supply of following material/fitting complete in all respect :-
Cross arm holding clamp with nuts & bolts
Holding clamp for top dropper channel Fuse set etc with nuts & bolts
Nuts & bolts of different sizes
Cu Z clamp
Al Lugs
The excavation of 2 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.
The excavation of 1 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.
Painting of Pole by double coating Aluminum & Red oxide paint. Paint will be provided by contractor
Earthing of ST Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO Norms.
Erection and grouting of stay in CC ratio 1:4:8 of Cement, Sand and Stone Ballast including cost of grouting material with Nozelling and binding of stay wire (Complete work)
Laying, stringing, sagging, binding and jumpering of ACSR Weasel conductor for LT/HT Line with fixing of LT Clamps/other clamps, Shackle insulator and nuts&bolts off size as per required.
Fabrication, errection, commissioning & Testing of 25 KVA T/F on Double Pole with all accessories including make its LT and HT connection. All necessary materials such as Holding clamp, Al.Lugs (Confirming to IS 8309), Z Clamp, Nuts & Bolts will be supplied by the Contractor.
Errection of Fuse set
Chemical earthing of Transformer (Body+Neutral) as per IS Code 3043 - 1987 specification (Materials will be provided by contractor)
fo|qr uxjh; forj.k [k.M&izFke xksj[kiqj ds vUrxZr tek ;kstuk esa Lohd`r iSdst la[;k 62@2022&23 ¼15osa foRr vk;ksx ds vUrxZr tydy foHkkx uxj fuxe okMZ la0 69] iqfyl ykbu xksj[kiqj esa 15 fd0ok0 ds uydwi fo|qrhdj.k dk dk;Z½ ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&
Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-
11 KV XLPE Cable 3x185sq mm
25 KVA Transformer
ST Pole 09 mtr long
11 KV TOP Channel
11 KV Dropper angle
11 kv Cable Jointing kit
11 KV Fuse set
11 KV TPMO set
Earthing complete
11 KV S/S Base angle
LT PVC Cable 4x16 sq mm
Supply of following material/fitting complete in all respect :-
Clamps for Top Dropper angle etc with nuts & bolts
Nuts & bolts of different sizes
Al Lugs
G.I pipe dia 4 inch
HDPE pipe dia 150 mm PN6 PE8
The excavation of 2 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of double Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.
The excavation of 1 No foundation pit of size 750mmX450mm and having depth of 1/6th of the full length of the pole. Fabrication & erection of Pole with fixing of necessary clamps & accessories (Top Channel, Dropper Angle etc.) as per required. All required materials such as Holding clamp/STP clamp, Nuts & Bolts off size etc will be provided by the contractor. Grouting of Pole in cc 1:4:8 (Cement, sand & 40 mm brick ballast), Grouting will be done in the block of size 450x450 mm x depth upto ground level and backfilling of pits with mud completely and leveling etc (Material provided by Contractor). Making plinth around Pole height 300 mm above ground level with top 100 mm is kept tapered so that No rainwater gets accumulated on the top. All work will be done as per RESPO Norms & relevent IS Specification.
Painting of Pole by double coating Aluminum & Red oxide paint. Paint will be provided by contractor
Earthing of ST Pole by MS earthing Rod & 6 SWG earthing Wire as per RESPO Norms.
Laying of HDPE Pipe 150 mm Diameter for laying of 11 KV 3x185 sq mm XLPE Cable by horizontal drilling method. The HDPE pipe shall be of PE 80 grade with pressure rating PN6 conforming to IS 4984/1995 and shall have wall thickness of 6.20 to 7.10 mm (HDPE pipe 150mm dia with elbow and socket for 11 KV cable will be supplied by contractor)
Laying and dressing of under ground 11 KV 3X185 sq mm XLPE Cable into HDPE Pipe by Horizontal drilling method as per RESPO norms. The Depth of horizontal drilling shall be between 2 to 3 meters or as per site required.
Fabrication, errection, commissioning & Testing of 25 KVA T/F on Double Pole with all accessories including make its LT and HT connection. All necessary materials such as Holding clamp, Al.Lugs (Confirming to IS 8309), Z Clamp, Nuts & Bolts will be supplied by the Contractor.
Errection of 11 KV 3X185 sq mm XLPE Cable Jointing Kit with complete work
Erection of TPMO & Fuse set
Chemical earthing of Transformer (Body+Neutral) as per IS Code 3043 - 1987 specification (Materials will be provided by contractor)
fo|qr uxjh; forj.k [k.M&izFke xksj[kiqj ds vUrxZr tek ;kstuk esa Lohd`r iSdst la[;k 63@2022&23 ¼14osa foRr vk;ksx ds vUrxZr tydy foHkkx uxj fuxe okMZ la0 30 egsok] flf)fouk;d] dkyksuh] pdjk vOoy] xksj[kiqj esa feuh uydwi gsrq 5 fd0ok0 ds la;kstu gsrq fo|qrhdj.k dk dk;Z½ ds dk;ksZ dks lseh VuZdh ds vk/kkj ij djk;s tkus gsrq dk;Z dk fooj.k %&
Loading, unloading and safe carriage of following materials from Store Centre, Gorakhpur to JE dump Store and JE dump Store to work site with proper stacking :-
LT ABC (3x50+1x35+1x16) sq.mm
Supply of following material/fitting complete in all respect :-
Distribution Box with Clamp (Distribution box shall be made from 20 SWG CRCA sheet by Deep Drown method with powder coating & size of box shall be 418 mm X 300mm X 120 mm (Roof of the box shall be tapered on both sides to drain the rain water)
Clamp for Distribution box
LT Insulation piercing connector for Line to Line jumpering in case of Tapping
Insulated dead end clamp with I hook
Insulated suspension clamp with I hook
LT PVC Insulated 1x35 sq.mm cable
Nuts & Bolts
Laying, stringing, sagging, binding and jumpering of ABC (3X50+1X35+1X16) Sq.mm. Cable of LT Line with fixing of Distribution Box with Clamp, Insulated Dead end clamp with I hook, Suspension clamp with I hook(Insulated), LT insulated Piercing connector, XLPE 1X35 Sq.mm. Al. cable for enerzing DB, XLPE 1X16 Sq.mm. Al. cable for giving connection to Street Light and nuts&bolts off size by the contractor.
M/s S.B.S. Traders
M/s Anil kumar singh
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .