Constt. of Mali Hut at Govt. Fruit Plant Nursery Sangaldan Gool in Distt.Ramban

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. ( Not exceeding 1.5 mtr in width ) and for shafts , wells, cesspits and the like not exceeding 10sqm on plan, depth upto1.5 mtr including disposal of excavated earth up to 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in(1.1) All kinds of soil. =80%

Ordinary rock = 20%

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering .All work up to plinth level . 1:4:8 ( 1 cement :4 fine sand :8 graded stone aggregate 40 mm nominal size ) Nallah. including all carriage

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work up to plinth level :3:6 with 20% boulders. ( 1 cement :3coarse sand :6 graded stone aggregate 20 mm nominal size) Crushed including all carriages

Provinding and laying in position, specified grade of reinforced cement conc. excluding the cost of centering, shuttering, finishing and reiforcement. All work up to plinth level. 1:2.4 (1 cement:2 coarse sand :4 graded stone agg. 20 mm nominal ) including all carriage complete

Brick work with common burnt clay F.P S ( non modualar) bricks of class designation 75 in foundation and plinth cement mortar 1:6 (1 cement :6 fine sand incluidng all carriages complete

Extra for brick work in super structure above plinth level lupto floor V level.

Providing and fixing pressed steel door frames conforming to IS 4351, manufactured from commerical mild steel of 1.25 mm / 1.60mmthickness including hinges jamb, lock bead and if required angle threshold of mild steel angle of section 50 x 25 mm, or base tiles of 1.25 mm /1.60mm pressed mild steel welded or rigidly fixed together by Machanical means, including M.S pressed butt hinges 2.5 mm thick with mortar guards, lock strike- plate and shock obsorbers as specified and applying a coat of approved steel primer after pre-treament of the surface as directed by Engineer--in -charge. Profile -A. Sheet of 1.25 mm thickness and base tiles of 1.25 mm

Providing and laying Reinforcement cement concrete 1:1.5 :3 (1 cement:1 1.5 coarse sand :3 graded stone agg. 20 mm nominal ) in suspended floors, balconies, landings, and stair cases having slope upto 15, excluding the cost of centring shuttering, All work up to floor v level.including all carriage complete

Centring and shuttering including strutting propping etc. and removal of form for :- (9.1)Foundations, footing, bases of columns etc for mass concrete

Suspended floors, roofs, landings, balconies and access platforms.

Lintels, beams , plinth beams, girders, bressumers and cantilevers

Stairs (Excluding landings) except spiral stair cases

Edges of slabs and breaks in floors and walls under 20cm wide

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windowsincluding lSI marked M.S. pressed Butt hinges brightfinished of required size with necessary screws excludingpanelling which will be paid for separately,al! complete as per direction of engineer- in charge.2nd class kail wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves or rebatesto be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Ply wood 5 ply, 9 mm thick 9.5.7.1 Decorative ply wood both side decorative veneer (type 1) conformiong to IS 1328 BWR type

Providing and fixing glazed shutters for doors, windowsand clerestory windows using 1Okg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqmhinf!eS bright finished of required size with necessary 35 30 screws 2nd class kail wood.

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width foraperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size 2nd class Kail wood

Suppying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the endby end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for insideand outside locking with push and pull operation completeincluding the cost of providing and fixing necessary em long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part1 andM.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick sqm top cove

Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg. ) finished with a floating coat of neat cement including cement slurry,but excluding the cost nosing of steps etc complete.50 thick with 20 mm nominal size stone agg. Cr. including all carriages

Reinforcement for RCC work including straightening,cutting bending, placing in position and binding all complete upto plinth level Thermo Mechanical Treated bars.

20mm cement plas!er finished with a floating coat of neat cement of mix: 1:4 mix 1 cement :4 fine sand including all carriages

12mm Cement plaster finished with a floating coat of neat cement of mix: 1Cement :4 fine sand

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in -eluding priming coat with cement prime

Finishing walls with water proofing cement paint ofrequired shade 1 New work (two or more coats) applied @3.84 kg/1 Osqm

Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc. Layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.50 M

Supplying and filling in plinth with fine sand under floors including, watering ramming consolidating and dressing complete.

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc incl. priming coat with approved steel primer all complete Fixed to steel windows by welding Fixed to steel windows by welding

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings,frames, guard bar, ladders railings brackets, gates and similar works In gratings,frames, guard bar, ladders railings brackets, gates and similar works

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mmnominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sandincluding finishing the top smooth Nallah including all carriages

Providing laying and fixing Ceramic glazed floor tiles 300 x 300 mm ( thickness to be specified by the manufactures ) of first qulaity conforming to IS: 13755 of NITCO , ORIENT, SOMANY, KAJARIA or equivlant make in colour such as White , Ivory , Grey , Fume Red , Brown laid on 20 mm thick bed of Cement Mortar 1:4 ( 1 cement :4 coarse sand ) including pointing the joints with white cement and matching pigment including all carriages

Providing and fixing electrification as light points/fan points exhaust point etc using ISI marked material in shape of switches , wire , MCB 16/32AMP , MCB Box board, batten /cutting the walls and making good condition etc including all items complete job. (29.1)5 AMP

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap,10 litre low level P.V. C. flushing cistern including flushpipe (of approved make) "manually contro(led device(handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making goodthe walls and floors wherever required. Long pan pattern white vitreous china W.C.pan of size 580 mm

Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the walls wherever required:White Vitreous China White Vitreous China wash basin size 600x480 mm with single 15 mm C.P. brasspillar taps

Providing and fixing kitchen sink with C. I. brackets, C.F'.brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. 19.10.1 White glazed fire clay kitchen sink of size 600x450x250 mm

Providing and fixing mirror of superior glass of approved quality size 450 x 350 mm

Providing and fixing PVC waster pipe for sink or wash basin including PVC waste fittings complete 32 mm dia flexible pipe

Providing and fixing 100 mm grating for Jally floors Nahani traps

Providing and fixing 600x 120 x 5 mm glass shelf with edges round of supported anodised aluminum angle , frames in the CP brass brackets

Providing and fixing PT MT towel ring of approved quality with concelled fitting

Providing an fixing unplasticised PVC connection with brass Union 15 mm nominal bore

Providing and fixing of CP brass angle value

Providing and fixing of Soap Dish of approved quality

Providing and fixing short body bib cock of approved quality 15 mm nominal bore

Providing and fixing CP cups of approved quality

Providing and fixing of GI pipe complete with GI fittings and clamps including cutting and making walls etc medium (43.1)15 mm nominal bore

20 mm nominal bore

Providing and fixing of PVC pipe with fitting with clamps and adhesive complete of superior quality (44.1) 75 mm dia

100 mm dia

Providing and fixing of PVC fitting with Adhesive complete of superior quality (45.1)100 mm dia D Bend

100 mm dia P Bend

100 mm dia TEE

75 mm dia D Bend

75mm dia P Bend

75 mm dia P trap

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with1:2:4 mix ( 1cemE?nt : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1cement: 3 coarse sand)finished with floating coat of neat cement and makingchannels in cement concrete 1:2:4 (1 cement: 2 coarsesand : 4 graded stone aggregate 20mm nominal size)finsihed with a floating coat of neat cement complete as per standard design.Inside size 90x80 em and 45 em deepincluding C.l. cover with frame (light duty) 455x61 Omm.internal diamensions total weight of cover and frame tobe not less than 38 kg (weight of cover 23 kg and weightof frame 15 kg)With F.P.S. bricks with class designation 75& with Crushed stone aggregate

Providing and fixing hardware anodised aluminium fittings including screwes complete (47.1)Sliding Tower bolt 300 x 16 mm

Tower bolt 200 x 10 mm

Tower bolt 150 x 10 mm

Handles 125 mm

Handles 100 mm

WANI CONSTRUCTION GROUP

M/S Elite Group of Construction Chanderkote

Runyal Group Of Construction

M/s Chenab Vally Builders

M/S MAX WORTH CONSTRUCTIONS

M/S INFRATECH CONSTRUCTION COMPANY SHG