REPAIR /PAINTING OF STEEL FURNITURE AT FURNITURE YARD UNDER BSO OF GE JAIPUR

Amount

Description for item S/No. 1.01 to 1.07 : Removing of existing unserviceable ply wood and S&F new plywood BWR Grade Make: Gold from Greenply/Gold from Archidply/ Club Prime from Century Ply confirming to IS-710 of 1980mmx900mm with shunken nut/bolts, appropriate hole shall be made with electric drill machine complete all as specified and directed.

Bed Hard Steel Drg No. : FD/E6/MAP/08

Charpoy IP hardtop Drg No. : FD/MAP-II/01

Charpoy IP folding with hard top Drg No. : FD-388 (R)

Replacement of unserviceable pre laminated particle board from the head and foot rest assy of bed hard Drg No. : FD/E6/MAP/08

S&F PVC/Rubber shoe of bed hard steel as per drg Drg No. : FD/E6/MAP/08

S&F PVC/Rubber shoe of Charpoy IP hard top as per drg Drg No. : FD/MAP-II/01

S&F PVC/Rubber shoe of charpoy IP folding as per drg Drg No. : FD-388 (R)

S&F MS conduct pipe stiffeners of charpoy IP and bed hard made out of 25mm square MS pipe of 18 gauge wall thickness with welding and painting neatly with two coat of synthetic enamel paint black to match with existing as shown on drawing and directed. Drg No. : FD/MAP-II/01, FD/E6/MAP/08

M&L welding where required and filling properly at places of welding point throughout in broken joints of frame including painting of replaced part of steel portion to match with existing as directed. one broken point shall be measured as one point i.e. one unit. Bed hard steel, Charpoy IP hardtop and charpoy IP folding with hard top Drg No. : FD/MAP-II/01, FD/E6/MAP/08, FD-388 (R)

Repairing Description for Almirah Large and Medium Steel : (4.01 to 4.06) Drg No. : FD-1031,1032

Taking out old unserviceable existing handle and S&F chromium plated handles including necessary nut, bolts, washer etc for almirah large steel/almirah medium steel. Drg No. : FD-1031,1032

Taking out existing shelves and making the same in functioning condition including necessary nuts, bolts, clips and washer etc of almirah large / medium steel all as directed. Drg No. : FD-1031,1032

Taking out old unserviceable leg of almirah large/medium steel and S&F new legs made out of 20 gauge MS sheet made to shape and sizes shown on drawing all as directed. Drg No. : FD-1031,1032

Removing of existing unserviceable lock from almirah medium/large steel and supply and fix new brass lock 6 lever with duplicate key complete. Drg No. : FD-1031,1032

Removing existing locking device with MS plate, rod and S&F new locking device with plate, rod complete in almirah large steel as directed. Drg No. : FD-1031

All as per Item No 4.05. above but in almirah medium steel Drg No. : FD-1031

Painting Description (for item No 5.01 to 5.16) :- M&L preparation old painted steel surfaces i.e filliing all holes/cracks or detoriated spots of old painted steel furniture with primer, (Internally /externally) putty then by cleaning and applying one coat of synthetic enamel paint olive green/black/ white/grey (as directed) with spray gun or by manual brush and roller as per requirement in appropriate shade complete including S&F hard rubber shoe where ever required all as specified and directed by engineer in charge.

Almirah large steel with shelves both side (out side and in side) Drg No. : FD-67, FD-1031

Almirah large steel with shelves out side only. Drg No. : FD-67, FD-1031

Almirah medium steel with shelves both side (out side and inside). FD-67,FD-350,FD-1032

Almirah medium steel with shelves out side only. FD-67,FD-350,FD-1032

Form with back (steel frame only). Drg No. : FD-78M

Form without back (steel frame only). Drg No. : FD-78M

Table office officer steel complete (outside and inside). Drg No. : FD-84,FD-1003

Table office clerk steel (outside and inside). Drg No. : FD-84,FD-1003

Table dining OR. Drg No. : FD-165M

Table 3’x2’ steel with drawer and without drawer Drg No. : FD-1008

Teapoy verandah white colour. Drg No. : FD-255

Teapoy verandah . Drg No. : FD/MAP-II/06

Chair writing steel with arms. Drg No. : FD-360

Table 900mm x 900mm x 860mm (steel). Drg No. : FD-1009

Locker Steel Drg No. : FD-1029

Book case steel Drg No. : FD-1028

Replacement description of tops (6.01 to 6.08): Taking out unserviceable top and S&F new top made out of 18mm thick particle/MDF board Make Kitply with one side exterior laminated sheet including plain/half round 4mm thick teak wood edging around the top duly polished with the help of necessary screw/ nut bolts all as specified in drg and directed by engineer in charge

Table dining OR Drg No. : FD-165

Table office officer steel Drg No. : FD-1003

Table office clk steel Drg No. : FD-1004

Table typist steel Drg No. : FD-1006

Table top of size 3’x2’ with or without drawer Drg No. : FD-1007, FD-1008

Teapoy verandah Drg No. : FD-255

Teapoy verandah Drg No. : FD/MAP-II/06

Table 900mm x 900mm steel Drg No. : FD-1009

Repairs to Tables (7.01 to 7.05) :

Taking out old unserviceable lock of drawers of table officer office/ clerk/ typist steel and S&F brass lock with four levers locks with duplicate keys. Drg No. : FD-1004,1003, FD-1006

Taking out existing drawers of table office clerk /typist/ officers/table 3x2 steel and re-fixing same after necessary setting of drawers for free movement all as directed. Drg No. : FD-1004, 1003, FD-1006, 1008

Taking out old unserviceable drawers of table office clerk/ typist/ officers steel and S&F new drawers made out of 20 gauge MS sheet made to shape and sizes shown on drawing all as directed. Drg No. : FD-1004, 1003, FD-1006

Taking out old unserviceable existing centre stiffeners/long rail of table dining OR and supplying and fixing new one made out of 25mm square MS pipe of 1.6mm wall thickness as shown on drawing and directed. Drg No. : FD-165

M&L welding throughout in broken joints of frame of table dining OR, teapoy verandah,table 3’x2’, 3’x3’, office officer, office clk, typist etc. Welding at one broken point will be counted as one point. Drg No. : FD-165,255, 1003, 1004, 1006 to 1009

Taking out old unserviceable seat plank of form with back and S&F new plank of 2nd class hard wood in one piece duly wrought upper side including edges and cleaning the other face bottom fix with MS nut and washer as shown on drawing & directed size of Plank shall be 1800mm x 255mm x 25mm. Drg No. : FD-77,97,78M

All as per Item No 8.00 above but form without back and size of Plank shall be 1525mm x 255mm x 25mm. Drg No. : FD-77,97,78M

TV trolly (10.00 to 10.03) Drg No. : FD/E6/MAP/04

Replacement of 5.5mm thick plain glass openable glass shutters with magnetic catcher and stainless steel patch fitting for glass EBCO type all as per drg as directed.

Replacement of top of TV trolly with 18mm thick pre-laminated particle/MDF exterior grade board ISI marked of approved shade with 50 x 50mm moulded teak wood beading on 3 sides to shape to be provided all as per drg and as directed.

Replacement of swivel type nylon castors all as per drg and as directed.

Table bed side (11.00 to 11.07) Replacement of following unserviceable parts made of 18mm pre-laminated particle board ISI marked all as per drg and directed by engineer in charge. Drg No. : FD/E6/MAP/15

Top of table bed side of size 440mm x 460mm alongwith 6mm PVC edging

Side/bottom pane of table bed side of size 440mm x 400mm

Back of table bed side of size 460mm x 440mm made of ply 6mm BWR grade

S&F front steel support/ leg of table bed side duly painted black in colour with the help of screws / washers as per drg and directed.

S&F rear steel legs including back of table bed side duly painted black in colour with the help of screws / washers as per drg and directed.

Tightening of steel support as well as particle board panes to make it serviceable

S&F PVC/Rubber shoe of table bed side

Locker Steel : (12.00 to 12.05) Drg No. : FD-1029

Taking out old unserviceable existing handle and S&F chromium plated handles including necessary nut, bolts, washer etc for locker steel.

Taking out existing shelves and making the same in functioning condition including necessary nuts, bolts, clips and washer etc of locker steel all as directed.

Taking out old unserviceable leg of locker steel and S&F new legs made out of 20 gauge MS sheet made to shape and sizes shown on drawing all as directed.

Removing of existing unserviceable haps and staple and S&F new set complete.

S&F 20mm chromium plated steel conduct pipe along with suitable bracket

Book Case Steel : (13.01 to 13.05) Drg No. : FD-1028

Taking out old unserviceable existing handle and S&F chromium plated handles including necessary nut, bolts, washer etc for book case steel.

Taking out existing shelves and making the same in functioning condition including necessary nuts, bolts, clits, clips and washer etc all as directed.

Taking out old unserviceable glass and S&F new plain glass 3mm including fixing of glass supporing MS plate with screw/nut bolts. The shape and sizes as per drawing and directed.

Removing of existing unserviceable locks and S&F new lock set (04 Nos of lock with two keys only) as per drawing and directed.

M&L welding where required and filling properly at places of welding point throughout in broken frame of Locker steel and book case steel. One broken point shall be measured as one point ie one unit.

REPAIRS TO CHARPOY GI HARD TOP (14.01 TO 14.06) M&L for replacement of following parts all as specified and shown on drawings. Fixing and finishing shall be done in accordance with standard workmanship/ specification and as directed. Drg No. : FD-220(M)

Removing existing unserviceable plywood from charpoy GI Pipe and tightening of Charpoy frame, check nuts and elbow as required and Supply & fixing of new plywood BWR Grade Make: Gold from Greenply/Gold from Archidply/ Club Prime from Century Ply confirming to IS-710 of 1980mmx900mm with shunken nut/bolts, appropriate hole shall be made with electric drill machine complete. Providing 04 Nos of clits welded 2 on each short rail and 02 Nos of stiffner made of flat iron of size (40x05 x900 ) mm duly painted black and ply shall be fixed with 10 Nos of suitable round headed nut bolts and washer as approved in each charpoy through suitable drill machine holes of appropriate size complete all as directed by engineer in charge.

Removing of old long rail of Charpoy GI Pipe Make TATA, Jindal and supply and fix new long rail of 32mm dia GI pipe medium grade duly threaded both sides as required. Drg No FD-220 Note : 1. Old long rail as retrieved shall be used for converting short rail under item No 14.03 and charges for converting is included in unit rate of item. 2. GI pipe shall be arrange by the contractor and pipe shall be ISI marked.

Conversion of long rails of Charpoy GI Pipe (retrieved under item No 14.02) into short rail by cutting/finishing to shape and threading and replacing the same as required against unserviceable short rail. Drg No FD-220 Note : Old short rail retrieved shall be used for converting the leg under item No 14.04 and charges for converting is included in the unit rate of item.

Conversion of short rails (retrieved under item No 14.03) into leg rail by cutting/finishing to shape and threading and replacing the same as required against unserviceable short rail.Drg No FD-220.

Removing old elbow from charpoy and S&F 32mm bore medium grade GI elbow, 3 ways ISI marked complete all as directed.

Removing old check nut from charpoy and S&F new check nut 32mm bore, 6mm thick galvanised iron medium grade complete all as directed.

Repair description of Steel chairs (15.01 to 15.04) Drg No. : FD/E6/ MAP/12

S&F MS flat iron 440x18x3mm in chair writing steel under seat , front and back (set of two) with welding and painting neatly in colour paint black complete all as directed.

Taking out unserviceable seat of Chair writing Steel and S&F new seat 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

Taking out unserviceable back of Chair writing Steel and S&F new back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shadewith black pvc beeding including necessary nut bolts and washer.

Taking out unserviceable PU handle of Chair writing Steel and S&F new PU handle with screw/ Nut/bolts as per drg.

Chair Computer (16.01 to 16.06) Drg No. : FD/E6/ MAP/01

Taking out unserviceable seat of Chair computer and S&F new seat 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

Taking out unserviceable back of Chair computer and S&F new back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

Removing of unserviceable castor from the chair computer revolving and S&F new castors as per drg and directed.

Removing of unserviceable PVC Base (5 legs) from the chair computer revolving and S&F new PVC base as per drg and directed.

Removing of unserviceable hydraulic assy from the chair computer and S&F new hydraulic assy with pvc couplings as per drg and directed.

Taking out unserviceable PU handle of Chair computer and S&F new handle with suitable screw/ Nut/bolts as per drg.

Chair school with hand rest:- (17.01 to 17.03)

Replacement of writing top made of 18mm thick pre-laminated MDF board of approved colour ISI marked 585mm x 500mm and fixing it to handle of chair by means of hinges 75mm all as per drg and as directed. Drg No. : FD/E6/MAP/05

M&L welding where required and filling properly at places of welding point throughout in broken joints of frame including painting of replaced part of steel portion to match with existing as directed. one broken point shall be measured as one point i.e. one unit. Chair writing,CBA with hand rest,school with hand rest and table bed side Drg No. : FD/E6/MAP/12, FD-260, FD/E6/MAP/05,FD/E6/MAP/15

Removing the useviceable PVC seat assy from chair school with hand rest and S &F new PVC Seat assy of superior quality as shown on drg and as aproved by Engr-in-charge. Drg No. : FD/E6/MAP/05

Chair CB/CBA steel MH (18.01 to 18.03) Drg No. : HFD-2045

Taking out unserviceable seat of Chair CBA Steel MH and S&F new seat 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

Taking out unserviceable back of Chair CBA Steel MH and S&F new seat 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

M&L 04 nos of hard rubber toe in legs of chair CB/CBA Steel MH including removal of broken rubber toe.

Chair Easy steel/HFD (19.01 to 19.02): Drg No. : HFD-2034

Removing of unserviceable cloth rexene and foam cushion cloth of chair easy frame and supplying and fixing new Rexene/lining cloth/frame with cushion 40 density, 50mm thick as shown in drawing and as directed. Size of seat frame shall be 560mm x 535mm x 50mm.

All as per Item No 19.01 above but back frame of chair easy steel of size 560mm x 355mm x 25mm (thickness of foam cushion 50mm & 40mm density).

Chair revolving (20.01 to 20.06): Drg No. : TP

Taking out unserviceable seat of Chair Revolving and S&F new seat 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

Taking out unserviceable back of Chair Revolving and S&F new back 12mm, teak ply with ploy urethane foam 50mm thick moulded with density 40 Kgs per cum with fiber cloth of approved colour and shade with black pvc beeding including necessary nut bolts and washer.

Removing of unserviceable castor from the chair revolving and S&F new castors as per drg and directed.

Removing of unserviceable PVC Base (5 legs) from the chair revolving and S&F new PVC base as per drg and directed.

Removing of unserviceable hydraulic assy from the chair revolving and S&F new hydraulic assy with pvc couplings as per drg and directed.

Taking out unserviceable PU handle of Chair revolving and S&F new handle with suitable screw/ Nut/bolts as per drg.

Stool steel with backrest HFD 2007 (21.01 to 21.02) Drg No. : HFD-2007

Removing unserviceable cloth rexene and foam cushion cloth of seat of stool steel frame and supplying and fixing new Rexene/lining cloth/frame with cushion 40 density, 50mm thick as shown in drawing and as directed.

Removing unserviceable cloth rexene and foam cushion cloth of back of stool steel frame and supplying and fixing new Rexene/lining cloth/frame with cushion 40 density, 50mm thick as shown in drawing and as directed.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

GLOBAL ENGINEERS AND INNOVATORS

M/S United Builders

shekhar & company

M/S Shri Balaji Enterprises

M/S CHANDER SHEKHAR