Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance LESLIGANJ PALAMU | Admitted-Finance |
| 3 | Rejected-Technical | Rejected-Technical Rejected |
| 4 | Rejected-Technical | Rejected-Technical Rejected |
Tender Value
₹69.4 L
EMD Value
₹1.4 L
Closing Date
20 May 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Nodal Officer
e Procurement Cell, Office of the Superintending Engineer, Building Construction Department, Circle No.-2, Combined Building, Line Tank Road, Ranchi-834001
Construction of Additional Central Library Near Sahitya Samaj Chowk at Medininagar, Palamu.
2023_BCD_71117_1
06/BCD/CIR-2/DALTONGANJ
Open Tender
Civil Works - Buildings
Works
180 days
Palamu
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
EE, BCD, Building Division, Daltonganj
₹1.4 L
Yes
23 Aug 2023
15 May 2023
22 May 2023
15 May 2023
20 May 2023
15 May 2023
Amount
Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.
Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50Mand lift of 1.5M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)
Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).
Providing P.C.C. with nominal mix of (1:1.5:3) in foundation with approved quality of stone metal grade III (50mm to 25mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l.
Providing designation 75 A brick work in C.M.(1 :6) in foundation & Plinth with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.
Providing designation 75 A brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.
Providing designation 125 mm thick reinforced designation 75 A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials , scafolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l.
Providing RCCM - 200 with nominal mix of (1:1:5:3) in foundation and plinth with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering , mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete, s per building specification and direction of E/I
extra for centring and shuttering including strutting propping etc, and removal of form
Providing RCCM - 200 with nominal mix of (1:1½:3) in columns with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering , mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete, s per building specification and direction of E/I
extra for centring and shuttering including strutting propping etc, and removal of form
Providing RCCM - 200 with nominal mix of (1:1:5:3) in lintel with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering , mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete, s per building specification and direction of E/I
extra for centring and shuttering including strutting propping etc, and removal of form
extra for centring and shuttering including strutting propping etc, and removal of form (plinth)
Providing RCCM - 200 with nominal mix of (1:1½:3) in beam of all types with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering , mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement, taxes and royalty all complete, s per building specification and direction of E/I
extra for centring and shuttering including strutting propping etc, and removal of form
Providing av. 63mm thickR.C.C.M - 200 with nominal mix of (1:1.5:3) in chajja with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening, centering, shuttering and mixing cement concrete in mixer and placing in position, vibrating, striking, 6mm cement plaster (1:4) in ceiling and sides of chajja with sand of F.M. 1.5 curing (but excluding the cost of reinforcement) taxes, and royalty all complete as per building specification and direction of E/l.
extra for centring and shuttering including strutting propping etc, and removal of form
Providing tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. Taking 8mm TMT FE 500 ( only valid for SAIL & TATA STEEL)
Providing Tor steel reinforcement of 10mm. dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. 10mm TMT FE 500 (only valid for SAIL & TATA STEEL)
Providing Tor steel reinforcement of 12mm dia.to25 mm dia bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. 12mm TMT FE 500 (only valid for SAIL & TATA Steel)
Supplying, fitting and fixing 35mm thick solid core type non decorative double leaf flush shutters in doors and windows with block board core blended with high quality pehnol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I.
Providing and fixing pressed steel door frames conforming to IS: 4351. manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50X25mm or base ties of 1.60mm pressed mild steel welded or rigidly fixed together by mechanical mens, including M.S. pressed butt hinges 2.5mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-incharge - Profile B
With float glass panes of 8mm thickness
Providing and fixing aluminium extruded sedction body tubular type universal huydraulic door closer (having brand log with ISI, IS:3564) embossed on the bodyu, door weight upto 36kg. To 80 kg. and door width from 701mm to 1000mm) with double speed adjustement with necessary accessories and screws etc. complete
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete
Twin rubber stopper
Providing and fixing bright finished brass 100mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc. complete
Supplying, fitting and fixing fully glazed steel door, winodws or ventilations of standard rolled 'Z' mullion steel sections and size as per IS - 1038 joints met and welded with 100X16X3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15X10X10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with aluminium beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in postion in all storys and taxes all complete as per building specification and direction of E/I.
Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)
Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.)
Providing and laying double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting. risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l.
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations. a. Applying and grouting a slurry coat of neat cement using 2.75kg/Sq.m. of cement admixed with ;proprietary water proofing compound confirming to IS 2645 over the RCC slab including cleaning the surface before treatment.
.b.Laying cement concrete using broken bricks/brick bats 25mm to 100mm size with 50% of cement mortar (1 cement : 5 coarse sand) admixed with proprietary water proofingcompound confirming to IS 2645 over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with proprietary water proofing compound confirming to IS 2645 to required slope and treating similarlythe adjoining walls upto 300mm height including roundingof junctions of walls and slabs.
C. After two days of proper curing applying a second coat of cement slurry admixed with proprietary water proofing compound confirming to IS 2645 and approved by Engineer-incharge d. Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with properietary water proofing compound conforming to IS:2645 and approved by Engineer-incharge including laying glass fibre cloth of approved quality in top layer plaster and finally finishing the surface with trowel with neat cement slurry and making of 300X300mm square 3mm deep.
e. The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as direted and specificed by the Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurra as 65mm
Providing & laying water proofing treatment in sunken portion of WCs, bathrooms etc. by applying cement slurry mixed with Armourcrete of M/S The Structural Water Proofing Company PVT. Ltd.or Tapecrete of M/s CICO Engg. Servce consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with Armourcrete or Tapecrete @ 0.125 kg/ sq.m. This layer will be allowed to air cure for 4 hours
(b)second layer of slurry of cement @ 0.242 kg/sqm mixed with Armourcrete or Tapecrete @ 0.126 kg/ sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
The rate includes preperation of surface, treatment& sealing of all joints, corners, junctions of pipes & masonary with polymer mixed slurry.
Providing 1.5mm cement punning including curing carriage of water with all leads and lifts as per building speicification and direction of E/I.
Providign and applying Plaster of Paris Putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.
Providing two coats of oil bound distemper ofapproved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.
Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered syrface bv rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, sacffolding washing of floors and taxes all complete as per building specification and direction of E/I,
Finishing walls with premium acrylic smooth exterior paint with sillicone additives of requited shade . New work : 2 or more coats applied @1.43 Ltr/10sqm over and including base coat of waterproofing cement paint applied @2.2 Kg/10 sqm
Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l.
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
Making plinth protection with bricks of class designation 75 laid on edge in cement mortar 1:6 (1cement :6 coarse sand) with 12mm th. Bed of cement mortar 1:6 (1cemnt:6 coarse sand) over 75mm bed of dry brick aggregate 40 mm nominal size rammed, consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1:3(1cement :3 fine sand).
Providing & injecting chemical emulsion for pre-construction Anti-termite treatment and creating a chemical barrier under and all around the coloum pits,wall treanches,basement excavation, top surface of plinth filling,junctions of wall and floor along the external perimeter of building with approved chemical as per IS code As per specification and direction of E/I.
Providing and laying 25mm thick kotah stone slab flooring of approved size, texture and colour over 19mm thick base of lime mortar (1:1:1) (1 lime putty sucrkhi coarse sand) laid over and jointed with grey cement slurry mixed with pigement to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. - 600 X 600mm size
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grde made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the durection of Engineer-in-charge.
labour for fitting and fixing G.C.I or C.A sheet roofing in proper slope including the cost of "J" or "L" hooks, limpet and bitumen washers, carriage of sheet to work site and taxes all complete as per building specification and direction of E/I
GCI sheet 0.50 mm
angles sze in mm
labour for fitting and fixing G.C.I or C.A sheet ridge including the cost of -do- -do-
Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished seamless type tubes
Iron and steel plate
steel circular hollow pole of standard specification for street lighting to mount light at 5 metre height above deck level
erection of c.c. pole above 4.5 m and upto 6.5 m. erection of metallic pole of following length in cement concrete 1:3:6 foundation including all as required
S.I.T.C. of floowing rating led street lighting luminaries with pressure die cast housing and toughened glass cover (0p 66 protection) in existing pole/pipe for supply voltage 100-270V AC 50Hz .luminaries shall be confirm to is 10322 part 5 seciton -3 and shall be complete with all necessary accessories as required. ( 2) 25 W led street light
Providign and applying Plaster of Paris Putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.
Finishing walls with premium acrylic smooth exterior paint with sillicone additives of requited shade . New work : 2 or more coats applied @1.43 Ltr/10sqm over and including base coat of waterproofing cement paint applied @2.2 Kg/10 sqm
Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l.
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
Supplying, fitting and fixing fully glazed steel door, winodws or ventilations of standard rolled 'Z' mullion steel sections and size as per IS - 1038 joints met and welded with 100X16X3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15X10X10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with aluminium beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in postion in all storys and taxes all complete as per building specification and direction of E/I.
Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)
Supplying, fitting and fixing 35mm thick solid core type non decorative double leaf flush shutters in doors and windows with block board core blended with high quality pehnol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I.
dismantlling pucca brick or lime work including stacking serviceable materials in countable stacks within 15 M. lead and dispoal of unserviceable materials with all leads all complete as per direction of E/I
dismantlling plain cement or lime concrete work including -do-
taking down old door and window shutter including stacking serviceable materials within 15 m lead and dispoal of unserviceable materials with all leads all complete as per direction of E/I-
taking down chaukhat in door including-do-
taking down chaukhat in door including-do-
leak repair to tarraced roof with cement and powder application -do-
Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l.
Construction of 200mm dia. High yield B/T/W.Supplying, all materials, labour and tools and equipments for drilling 200mm dia, bore well in all kinds of soil and rock by using DTH super ring machine as per direction of E/I.
0 to 30m. below G.L.
30 to 60 Mtr. Below G.L.
60 to 90 Mtr. Below G.L
90 to 120 Mtr. Below G.L.
120 to 150 Mtr. Below G.L.
150 to 275 Mtr. Below G.L.
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia conforming to IS : 12818, including required hire and labour charges fittings & accessories etc. all complete for all depths, as per direction of Engineer-in-charge - 200mm nominal size dia
Gravel packing in tube well construction in accordance with IS : 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge
Development of tube well in accordance with IS 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required tile till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, colleting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete including hire & labour charges of air compressor, tools & accessoires etc. all as per requirement and direction of Engineer-in-charge.
Providing & fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of 200mm dia
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS:2800 (Part-1) including necessary bolts & nuts of required size complete
Providing and fixing bail plug/bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS :2800 (Part-1) 200mm dia
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pioes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement trenching, refilling & testing of joints complete as per direction of Engineer in charge
50mm nominal outer dia pipes
Supplying and commissioning of 5 H.P. submersible pump of reputed make ISI marked suitable for 200X150mm dia tube well and head of 90M with lowering 50mm dia column pipe 60mm 4 sq.mm finales copper cable with panel board main switch, starter, volt meter ammeter on off switch HRC fuse unit lighting arrangement all complete as per direction of E/I.
Providing brick flat soling all complete
Providing P.C.C. (1:1.5:3) in subbase all complete
Providing 75A Brick work in foundation all complete
Providing R.C.C. (1:1.5:3) in lintel all cost complete
Providing 125mm thick brick work in partition all cost
Proiding 12mm. Cement plaster all cost complete
Providing 1.5mm cement punning all cost complete
Providing R.C.C. (1:1.5:3) in slab all cost complete
Supplying C.I. Cover 600X450MM (Wt. 25 kg) - 4 nos.
Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. (A) With "P" trap (b)12.5 lit. low level P.V.C. cistern
Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry hindustan or any other ISS approved make with 100mm HCI p trap 15 litres CI pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings CI or C C bracket 32mm alkethene / PVC telescopic flush pipe about 2m long with one brass coupling and clamps GI chain and pull including supplying and fixing a pair of vitreous white glazed earthenware footrest to be fixed in floor 15mm CI body brass spindle stop cock of weight not less than 50 grames 15mm PVC connection pipe 450mm long and coat of red oxide primer etc all complete as per specification and direction of E/I.
Supplying, fitting and fixing flat back or angular lipped front vitreous white glazed earthern ware urinal of Hindustan "Parry" or any other approved ISS make with 5 ltrs. Capacity C.I. automatic fushing cistern of reliance for any other ISS approved make with all fittings with C.I. or RS brackets standard size G.I. flush pipe with fitting clamps 15mm C.I. body brass spindle stop cock of approved quality weight not less than 400 gms. 15mm PVC alkethene pipe 450mm long with brass coupling at both ends and doing plumber points including painting of exposed part with two coats of approved paint over a priming coat of red oxide cutting wall and floor making good the same etc. all complete as per speciifcification and direction of E/I. Flat back or standing corner (600X350mm)
supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or hindustan or any other I.S.S approved make supported on painted C.I OR R.S bracket 32mm C.I brass waste 15mm dia C.I body brass spindle stop cock of approved quality of weight not less than 350 grames, 32mm PVC wate pipe 750mm long with brass coupling with one end and making plumber joints etc.all complete as per specification and direction of E/I.
Supplying, fitting and fixing gun metal full way valve of approved quality all complete as per specifcation and direction of E/I. 20 mm dia
Making holes in walls for PVC Pipe and restoring the same atfer pipe Laying (b) 250mm thick wall
Making holes in wall for laying PVC pipes and restoring the same all cost complete (PVC pipe 125mm dia)
Bib cock - long thread (Basic rate Rs.728.15 + 30% for C.P. & laying charge)
Angular stop cock L.T.(Basic rate Rs.610.65 + 30% for C.P. & laying charge)
Glass shelf (Basic rate Rs.683.55 + 30% for C.P. & laying charge
32mm dia. PVC waste pipe 750mm long with cushion (Basic rate Rs.62.40 + 30% for C.P. & laying charge
15mm C.P. nipple with coupling(As per JSR 12 basic rate Rs.45.40 + 30% C.P. & laying charge)
Steel jali - 100mm dia. (Basic rate Rs.39.00 + 30% for C.P. & laying charge
toilet paper holder( 239.85*1.3 for installation
Supplying, fitting and fixing Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. 600 X 450mm
Supplying, fitting and fixing C.P. brass towel rail 20mm X 600mm with bracket container
Supplying, fitting and fixing C.P. brass soap dish container medium quality with screw and hinges etc.
Providing and fixing 15mm dia and 45cm long PVC connection pipe with heavy quality brass coupling at both ends etc all complete as per specification and direction of engineer in charge
Supplying, materials and labour for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600X450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600X475mm G.I. cover with frame (weight not less than 35kg) alongwith earth work in excavation and 80mm thick PCC (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
PVC plain bend 100mm dia.
PVC double junction with door and ear 100mm dia.
PVC cowel - 100mm dia.
floor trap 100 mm dia
Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931, 15mm dia nominal bore of approved brand C.P. fittings
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e fixing the pipe with clamps at 1Mtr. Spacing. This includes jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. Concealed work including cutting chases and making good the walls etc.
20mm nominal bore
25mm nominal bore
32mm nominal bore
External work - 40mm nominal bore
50mm nominal bore
Providing & fixing on wall face unplasticised - Rigid P.V.C. pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia
Providing and fixing on wall face unplaqsticised- PVC moulded fitting/ accessories for unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A,including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm bend
Providing and placing on terrace (at all floor levels) (PVC) Polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Point Wiring in PVC Conduit, with Piano type Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with piano type switch, modular plate, suitable size of GI box etc as required.
Group- C
S/F light plug point with piano type accessories:- Supply and Fixing GI/PVC box on surface or in recess including providing and fixing 5 pin, 5/6 amps piano socket outlet and 5/6 amps piano type switch, connection, painting etc as required
S/F power plug point with piano type accessories:- Supply and Fixing GI /PVC box on surface or in recess including providing and fixing 6 pin, 15/16 amps piano socket outlet and 15/16 amps piano type switch, connection, painting etc as required.
Supply & fixing 20A SPN MCB Industrial Socket Outlet: Supply and fixing of 20A, 240V, SPN insustrial type socket outlet with 2 poles and earth, metal enclosed plug top along with 20 amps 'C' series, SP MCCB, in sheet steel enclosure, on surface or in recess with chained metal cover for socket out let and complete with connections, testing and commissioning etc as required.for split/wondow AC points.
Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.
2x1.5 Sqmm + 1x1.5 sqmm earth wire(for Single Separate 5A)
2x2.5 Sqmm + 1x2.5 sqmm earth wire (for switch board circuit).
S/F TP MCB DB: Supplying and fixing following way, three pole and neutral sheet MCB distribution board, 415 volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc. as required ( But without MCB/RCCB/ ISOLATOR).
4Way (4+12), Double Door (Horizontal Type).
S/F Ceiling Rose: Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.
S/F Batten / Angle Holder: Supplying and fixing batten / angle holder including connection etc as required.
S/F Electonic Musical Call Bell: Supplying and fixing electronic musical call bell suitable for D.C./A.C. single phase, 230Volts, complete etc as required.
Erection on incandececent light fitting :- Erection of wall bracket/ceiling fittings of all sizes and shapes containing upto two GLS amps per fitting, complete with all accessories including connection etc as required.
ITC Ceiling Fan :- Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq. mm. FRPVC insulated,copper conductor,single core cable etc, as required.
ITC Exhaust Fan upto 450 mm sweep: installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning etc as required.
CARRIAGE OF MATERIALS (including C.P. 10%)
Bricks (1K+ 7P = 8 KM.)
Coarse Sand 5 km
Stone Chips (28P + 2K) = 30 KM.)
Supply 18/20W CFL (essential) in existing battan/angle holder. (Make :- Philips / Bajaj /Wipro).
Supply fitting fixing and testing of CFL Essential to be used as mirror light in toilets.(Make :- Philips/ Bajaj / Wipro.
Supply fitting fixing and testing of surface/ pendent mounted fluorscent tube light luminaries with 1x28W Tube light with all accessories as per the standard Catlogue Items. (Make :- Philips - TMS122M-TL-5-1X28WEBE/ Bajaj-BITR128/Wipro WIF 20128
Supply of 1400mm sweep ceiling fans complete with double ball bearing, motor, blades, downrod, canopies, capacitor, suitable for operation on 230 volts, 50 Hz., 1 phase, AC supply connection with 1.5 sq.mm PVC Copper wire complete as required (minimum Three star rated with euro effect fan shall be provided or approved by engineer incharge) Make- Havells Velocity 1400 mm / Bajaj 56" Grace Gold Dx / Crompton WW HE WOR 1400
Supply of 12" dia 1400 rpm,230V AC Exhaust Fan (metal) exhaust fan in with double ball bearing existing opening and fittinigs as required. Make- Havells Ventil Air-DB 300 mm / Bajaj Supreme Dlx 380mm 1400 rpm 1Ph Ind Ex Fan/ Crompton Trans Air 9"-Reversible.
Add 18 % GST (in Basic Rate must fill 12)
Add 1% Labour Cess (in Basic Rate must fill 1)
M/S TIWARI CONSTRUCTION
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .