CAMOUFLAGE PAINTING TO VARIOUS BLDGS OF EXPLOSIVE AREA OF NAD TROMBAY UNDER GE (NW) MANKHURD

Amount

Taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scrubbing down with water, etc. including all necessary scaffolding as required and taking off rubbish outside MD land, etc. complete all as specified and as directed.

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces using CM 1:6, finished the surface even and smooth without using extra cement all as specified and as directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceiling using CM 1:3, finished the surface even and smooth complete all as specified and directed.

M & L Rendering 20 mm thick on fair faces of brick work or concrete surfaces using CM 1:4, finished the surface even and smooth without using extra cement mixed with WPC @ 3% by weight of cement and Recron 3S synthetic fibre @ 0.5% by weight of cement all as specified and as directed. Note: WPC & Recron synthetic fibre shall be measured and paid separately

Supply only water proofing compound powder.

Chipping, removing carefully loose/damaged concrete including plastering (total thickness up to 60mm ) from RCC surfaces of columns, beams,Chajjas, soffits of slabs etc by low impact Hammer/Breaker without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land, complete all as specified and directed. Note: Hard concrete shall not be removed by force.

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hour between the coats, complete all as specified and directed. [Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.]

M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed. Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.

M&L for providing TMT bars any dia in various structural RCC elements like columns, beams, Slabs etc. including cutting, bending, fixing of bars with welding/ tying as required at site with & including binding wires etc. and all relevant works like anchoring of the bars in the existing RCC Members, complete all as specified and directed.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit, up to 20mm thickness while the bonding agent is still sticking, including levelling, profiling etc, complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit while the bonding agent is still sticking, exceeding 20mm thickness and not exceeding 40mm thickness in two layers, each layer not exceeding 20mm, including leveling, profiling etc, complete all as specified and directed.

M&L for casting & repairing of excessively damaged distressed RCC members (exceeding 60mm in thickness) with prebatched, prepacked, single component ready to use micro concrete from Fosroc (Renderoc RG) or equivalent of Dr. Fixit as approved by GE, at any level/ height and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, leveling, finishing, curing etc as per manufacturer's specifications and all other relevant works, complete all as specified and directed. (Note : Reinforcement only shall be measured and paid separately).

M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified.

M&L for 3 mm thick (minimum) white cement based wall care putty on new or old surfaces of walls/ceilings etc finished even and smooth, complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper with roller over one coat of primer, complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall etc and applying two coats of 100% anti fungal acrylic exterior emulsion paint over one coat of primer all as per manufacturer's instructions including necessary scaffoldings etc, complete all as specified and directed. Note: The percentage of colours in Camouflaging pattern shall be as under :- Olive Green - 50%, Dark Brown - 25%, Dark Stone/Leaf Brown - 25%

Material and labour for preparation of old treated surfaces of any description and at any position and applying one coat 100% anti fungal acrylic exterior emulsion paint in camouflage pattern complete all as specified and as directed Note: The percentage of colours in Camouflaging pattern shall be as under :- Olive Green - 50%, Dark Brown - 25%, Dark Stone/Leaf Brown - 25%

Material and labour complete removal of old external treated surfaces of any description and at any position and applying two coats of 100% anti fungal acrylic exterior emulsion paint over one coat of primer all as per manufacturer's instructions including necessary scaffoldings etc, complete all as specified and directed. Note: The percentage of colours in Camouflaging pattern shall be as under :- Olive Green - 50%, Dark Brown - 25%, Dark Stone/Leaf Brown - 25%

M & L Preparation of old plastered or un-plastered surface of wall and applying one coat of white wash complete all as specified and as directed

All as per ser Item No 20 above but on ceiling.

M & L for washing rubbing down & stopping of distempered & painted surfaces of walls, preparation of surfaces & applying one coat of oil bound distemper complete all as specified & directed by EIC.

M&L complete removal of existing treatment and preparation of surface of wall and applying two coat of distemper oil-emulsion, of white or tinted over coat primer complete all as specified and directed.

M& L preparation of old painted wooden surface of any description not other wise described , over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M& L preparation of old painted steel surface of any description not other wise described , over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M& L preparation of old painted steel surface of any description not other wise described , over 10cm width or girth and applying one coat of aluminium paint complete all as specified and as directed.

M& L preparation of old painted plastered surfaces on walls and applying one coat of synthetic enamel paint complete all as specified and as directed.

S & F in repair 6 mm thick Non asbestos fibre cement building board fixed or laid/inserted to timber/GI/Aluminium framework with screws in ceiling and applying 2 coats of white washing complete all as specified and directed.

M&L for filling of cracks in existing old surfaces of wall, chajjas, beams, parapets etc after cutting the same to V shape approximate 10mm wide and up to full depth of cracks with and including Chemistic crack seal caulking compound (Acrylic sealant) of M/s. Chemistik or equivalent of Dr. Fixit or of M/S STP Ltd, also including necessary scaffoldings etc, complete all as specified and directed.

Removing plant/growth including its roots up to 1.00 metre of plant height at any location/at any storey and of any description and treating the surfaces with Acid (HCL) and making good surfaces with cement mortar 1:4, complete all as specified and directed.

Supply only Recron 3S synthetic Fibre. Note : A sum of Rs 450.00 towards sch of credit shall be deducted to arrive the contract sum.

sahajanand const co.

Parmatma Enterprises

M/s Mohd Altaf Hanif Qureshi