E-Tender No. 33/2025-26, EUDC-II, Noida

Amount

fctusl Iyku 2025&26 ds vUrZxr fo|qr uxjh; forj.k [k.M & r`rh;] uks,Mk ds {ks= u;s 11@0-4 dsoh 15 ua0 midsUnzksa dh LFkkiuk ls lEcfU/kr dk;ZA

Safe Cartage of following centralised stock material from any of the Store Center of PVVNL Discom to work site including Loading from Store and safe unloading at site for Item No. 3 to 23

PCC Pole 11 Mtr

MS Channel (Dropper) 100x50x2028mm (for fuse set)

Stone pad 300x300x75mm

MS Top channel (125x65x2240mm)

11 KV Disc Insulator T&C type 4500kg.

11 KV Disc fitting

MS Channel 125x65x1300mm (T-off)

11 KV Pin insulator (Polymeric)

11/0.4 KV T/F 250 KVA

11 KV TPMO

11 KV fuse Set

LT incoming panel with metering equipment & fixing arrangement (LS)

LT PVC Cable Al 3.5x400 sq mm

LT PVC Cable Al 1x400 sq mm

Stay set Complete 16x1800

Earthing of pole by MS earthing rod of 20x2500mm

LT ABC (3x120+1x95+1x16) Sq mm

PCC Pole 8.5 Meter

ACSR Dog Conductor

11 KV V Type Steel Cross Arm

LT 3 Phase Distribution Box

Errection of above Centralised material for completing the works as per RESPO.

Installation and Commissioning of 11/0.4 KV, 250 KVA T/F Mounted on Plinth as per site requirement and providing & fixing of Lugs & copper L-piece (04 No.) of size 400x50x6mm and making of L.T.Connections with complete work in all respects.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. Single Pole (a) ST - 11 Mtr Lone Pole, PCC 8.5 Mtr Long Pole and PCC 11 Mtr Pole

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per RESPO. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. Double Pole and Single Pole Structures (a) ST - 11 Mtr Lone Pole, PCC 8.5 Mtr Long Pole and PCC 11 Mtr Pole

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Road Restoration charges shall be inclusive in quoted rates. Single Pole and Double Pole (a) ST - 11 Mtr Lone Pole, PCC 8.5 Mtr Long Pole and PCC 11 Mtr Pole

Laying, Sagging and Re-Sagging of AB Cable 3x120sqmm at different locations of T/F as per site requirement.

Fixing of MS Channel (Dropper) 100x50x2028mm (for fuse set) as per site requirement.

Fixing of Stone pad 300x300x75mm as per site requirement.

Fixing of MS Top channel (125x65x2240mm) as per site requirement.

Fixing of 11 KV Disc Insulator T&C type 4500kg.as per site requirement.

Fixing of 11 KV Disc fitting as per site requirement.

Fixing of MS Channel 125x65x1300mm (T-off) as per site requirement.

Fixing of 11 KV Pin insulator (Polymeric) as per site requirement.

Installation and Fabrication of 11 KV TPMO as per site requirement.

Installation and Fixing of 11 KV Fuse Set: Assembling and installation of fuse set on the fuse set structure of the T/F. The work includes fabrication for proper fixing, if required. Complete work in all respect.

Installation and Fabriciation and commissioning of LT incoming panel with metering equipment & fixing arrangement (LS) as per site requirement.

Laying and Fixing of LT PVC Cable Al 3.5x400 sq mm as per site requirement.

Laying and Fixing of LT PVC Cable Al 1x400 sq mm as per site requirement.

Fixing and Grouting of Stay set Complete 16x1800 as per site requirement.

Earthing of pole by MS earthing rod of 20x2500mm as per site requirement.

Laying and spreading of ACSR Dog Conductor as per site requirement.

Fixing of 11 KV V Type Steel Cross Arm as per site requirement.

Fixing of LT 3 Phase Distribution Box as per site requirement.

Supply and Errection of below De-Centralised/Market material for completing the works as per RESPO. (Contractor will provide the material at his own cost.)

Supply and Fixing of Clamps for LT T-off with bolts & Nuts as per site requirement.

Supply and Fixing of Holding clamps for top channel TPMO & fuse set etc. with bolts & nuts as per site requirement.

Supply and Fixing of Copper L-piece 50x225x10mm (LS) as per site requirement.

Supply and Fixing of Copper L-piece 62x225x12 mm (LS) as per site requirement.

Supply and Fixing of Al Leg long barrel off size (LS) as per site requirement.

Supply and Comissioning of 400KVA LT ACB Panel with Structure Havells/Crompton/L&T/any other approved in PVVNL Discom.

Supply and Fixing of Danger baord Barbed wire including jumper as per site requirement.

Supply of Red oxide paint and paint on Poles as per site requirement.

Supply of Aluminium paint and paint on Poles as per site requirement.

Construction of New Plinth for 250KVA & above capacity Distribution Transformers, The size of plinth shall be 2M long 2m wide and the height of the plinth shall be 1.50 M with 20 cm. thick top slab with 02 no. 125x65mm MS channel 2 M long embedded in it. The repairing work includes excavation of earth, laying of brick ballast pad for foundation brickwork, CC and plastering and proper curing. The ratio of cement/course sand/fine sand/brick ballast/stone grit as per RESPO schedule including unloading and Loading of the transformer with complete work in all respect. (All work and material in the scope of the Contractor)

Water Level Earthing For T/F

Construction of New Fencing of Transformer. The fencing shall be frame of size 1.5mt x1.80 mt fabricated out of MS angle iron of size 40x40x5 mm having 2 Nos. legs of 45 Cm. long in each frameduly welded and fixed with wire mesh of size 75mm 25mm, 10 SWG within the frame, pressed under MS flat of size 25x5 mm inside the angle iron on all four sides with the help of approx. 20 Nos. bolts and nuts. of 10 mm dia along with cross bracing of 25x5 mm MS flat on every frame will be grouted in 1:2:4 cement mortar with cement, coarse sand 20 mm gauge stone ballast in the size 0.22x0.22x0.45 Mtrs. Every frame after repairing will be painted with one coat of red oxide and two coats of blue synthetic enamel paint of approved make after proper cleaning. The above mentioned frame will be jointed with each other with 70 mm long MS flat of size 25x5mm by first class welding as per site. Fabrication and providing of wire mesh fencing frame for gate of size 1.5x180 Mtrs. Fabricated as items no. 2 and fixing of gate frame at each S/S as per site requirement with grouted frame providing 3 Nos. 100 mm size heavy duty hinges duly welded and having suitable locking arrangment and proper painting.

Supply and Fixing of Suspension Clamp With I Hook as per site requirement.

Supply and Fixing of Dead End Clamp With I Hook as per site requirement.

Supply and Fixing of LT Pole Clamp With Nut & Bolt For PCC Pole as per site requirement.

fctusl Iyku 2025&26 ds vUrZxr fo|qr uxjh; [k.M & xzsVj uks,Mk ds {ks= u;s 11@0-4 dsoh 31 ua0 midsUnzksa dh LFkkiuk ls lEcfU/kr dk;ZA

Safe Cartage of following centralised stock material from any of the Store Center of PVVNL Discom to work site including Loading from Store and safe unloading at site for Item No. 65 to 81

11 KV Fuse Set

LT Incoming Pannel With metering equipment fuse.

100 KVA T/F 11/0.4 KVA

Earthing Complete

PCC Pole 8.5 Mtr. Long

PCC Pole11 Mtr. Long

11 KV T Channel

11 KV Pin Insulator

LT PVC Cable 3.5x150/70 Sq.mm.

Stay Set Complete 16x1800

3 PH. Distribution Box

ACSR Weasel Conductor

11 KV Droper Channel 100x50x2240 mm.

MS Angel 75x75x6x2028mm. (T/F Base Angle)

ABC Cable 3x95 sq.mm

11 KV Disc Insulator T& C Type (45 KN)

11 KV Disc Fitting (45 KN, T &C)

Errection of above Centralised material for completing the works as per RESPO.

Installation and Commissioning of 11/0.4 KV, 100 KVA T/F Mounted on Plinth as per site requirement and providing & fixing of Lugs & copper L-piece (04 No.) of size 400x50x6mm and making of L.T.Connections with complete work in all respects.

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. Single Pole (a) ST - 11 Mtr Lone Pole, PCC 8.5 Mtr Long Pole and PCC 11 Mtr Pole

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per RESPO. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. Double Pole and Single Pole Structures (a) ST - 11 Mtr Lone Pole, PCC 8.5 Mtr Long Pole and PCC 11 Mtr Pole

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per RESPO. Work includes back filling and proper ramming. Road Restoration charges shall be inclusive in quoted rates. Single Pole and Double Pole (a) ST - 11 Mtr Lone Pole, PCC 8.5 Mtr Long Pole and PCC 11 Mtr Pole

Laying, Sagging and Re-Sagging of AB Cable 3x95sqmm at different locations of T/F as per site requirement.

Installation and Fixing of 11 KV Fuse Set: Assembling and installation of fuse set on the fuse set structure of the T/F. The work includes fabrication for proper fixing, if required. Complete work in all respect.

Installation and Comissioning of LT Incoming Pannel With metering equipment fuse as per site requirement.

Fixing of Earthing Complete as per site requirement.

Fixing of 11 KV T Channel as per site requirement.

Fixing of 11 KV Pin Insulator as per site requirement.

Fixing of LT PVC Cable 3.5x150/70 Sq.mm. as per site requirement.

Fixing and Proper Grouting of Stay Set Complete 16x1800 as per site requirement.

Fixing of 3 PH. Distribution Box with clamp as per site requirement.

Laying and strengthing of ACSR Weasel Conductor as per site requirement.

Fixing of 11 KV Droper Channel 100x50x2240 mm. as per site requirement.

Fixing of MS Angel 75x75x6x2028mm. (T/F Base Angle) as per site requirement.

Fixing of 11 KV Disc Insulator T& C Type (45 KN) as per site requirement.

Fixing of 11 KV Disc Fitting (45 KN, T &C) as per site requirement.

Supply and Errection of below De-Centralised/Market material for completing the works as per RESPO. (Contractor will provide the material at his own cost.)

Supply and Fixing of LT Clamps as per site requirement.

Supply and Ded end Clamp with I Hook as per site requirement.

Supply and Fixing of Suspention Clamp with I Hook as per site requirement.

Supply and Fixing of LT Piercing connector 95 sq.mm. as per site requirement.

Supply and Fixing of LT Piercing connector 50 sq.mm. as per site requirement.

Laying and Fixing of LT 1x16 sq.mm connecting lead as per site requirement.

Supply and Fixing of Holdings Clamp as per site requirement.

Supply and Fixing of Nut & Bolts off size as per site requirement.

Supply and Fixing of Distribution Pad Loak as per site requirement.

Dismentaling and Removal of 10 & 16 KVA Transformer with all relevant accessories from site and safe carriage of its from site to any store of Discom PVVNL including loading and unloading both ends.

Saraswati Electricals & Contractors (BID ID -5567366)

Nutech Air Projects (BID ID -5566993)

Perennial Contractors Pvt. Ltd. (BID ID -5567313)