PERIODICAL SERVICES AND REPAIRS TO JOINERY, FLOORS INCLUDING SUNKEN FLOOR AND REPLACEMENT OF SANITARY FITTINGS, PIPE FITTINGS AND PLUMBING LINES AT DGQA UNITS AT FACTORY AND INCLUDING MAINTENANCE AND REPAIR OF E/M ITEMS AND CONNECTED WORKS AT NIA TRI

Amount

M&L for preparating old decorated surfaces of walls (plastered or unplastered) including cornices and pillasters and applying one coat of white washing complete all as specified and directed

All as per item No. 1 above but on ceiling surfaces complete all as specified and directed

All as per item No. 1 above but one coat of colour wash complete all as specified and directed

M&L for preparation of old treated surface of any description over 10 cm girth or width not other wise described and applying one coat of cement base paint on wall surfaces complete all as specified and directed .

M&L for applying one coat of wall care putty to cover old uneven plastered surfaces in wall/ceiling upto 1mm to cover undulations and finished even and smooth using emery paper all as directed by Engineer in Charge.

M&L for applying one coat of oil bound distemper on old deorated plastered surfaces of walls including preparation of surfcaes and filling holes and undulations with wall putty all as specified and directed.

Taking down cement or cement lime plaster on brick walls incl racking out joints hacking for key scrubbing down with water etc

M&L for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of walls, finished even and smooth(without using extra cement) complete all as specified

M&L for Rendering 5mm thick in CM 1:3 on concrete surfaces of ceiling finished even and smooth ( without using extra cement) complete all as specified

M&L for preparation of newly plastered surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new surfaces complete all as specified and directed.

M&L for preparation of new plastered wall surface and applying two coat of cement base paint over a alkali resitant primer on wall surfaces complete all as specified and directed .

M&L for applying three coats of whitewash in ceiling on newly palstered surfaces all as specified and directed complete all as specified and directed . .

M&L for applying three coats of whitewash on newly plastered wall surfaces all as specified and directed complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper over a priming coat using chalk whiting, complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper on old plastered surface complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying two coats of cement base paint on old plastered surface complete all as specified and directed.

M&L for preparation of old painted wooden surfaces exc 10 cm with or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

-do- all as per item No 17 above but on steel surfaces complete all as specified and directed.

Writing letters or figures .(Block, Roman, Italic or indian n exc 30cm height complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

All as per item No. 01 above, but exc 1.5 Sqm and n.exc 4 Sqm each.

Taking down shutters exc 1 Sqm and not exeeding 2 Sqm each complete all as specified and directed.

Taking down shutters n exc 1 Sqm each complete all as specified and directed.

S&F pressed steel frames of size 165x60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plate etc , complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate etc , complete all as specified size of 105 x60mm all as specified and directed.

S&F 35mm thick second class hardwood glazed and skeleton door shutters open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed. Note : Glazing and gauze shall be measured and paid seperately.

S&F 2nd class Hard wood 35 mm thick framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck in side with solvent cement complete all as specified and directed.

S&F steel windows with side hung shutters incl projecting type hinges with steel handle and steel pegs stay complete with glazing bars dovetailed or welded with glazing bars all as shown on drg complete all as specified and directed.

S&F steel windows with side hung shutters incl projecting type hinges with steel handle complete with out glazing bars dovetailed or welded as fly proof shutters complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F Mild steel framed work such grill/guard bars incl fixing on steel window/ventilator frames complete all as specified and as directed.

M&L for providing plain cement concrete 1:3:6 Type C0 (using 12.50 mm graded stone aggregate) as in filling of hollow pressed steel frame including necessary formwork complete all as specified and as directed.

M & L for PCC 1:2:4, type B1, using 20mm graded stone aggregate as in bed block for fixing holdfasts and coping including necessary use and waste of form work complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled 100mm long complete all as specified and directed.

S&F Butt hinges extruded Aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type C-21, with MS hinge pin 100 mm size complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section 150 mm length complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type 150 mm size, anodized complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodized sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140 mm complete all as specified and directed.

Single action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in repairs to steel / wooden Joinery complete all as specified and directed.

S&F ground or obscured or frosted sheet glass 4 mm thick, ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane all as specified and directed.

S&F Sheet glass 4.0mm thickness ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F Sheet glass 4.0mm thickness ordinary quality and glazing with oil putty in square but exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs Fancy type Steel PVC Coated, drapery rod of size 20-25mm dia, including fixing of Steel powder coated fancy brackets & end stops 2 Nos in Each opening etc complete all as specified and directed.

M&L Preparation of new wood surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M &L for 12 mm thick Prelaminated termite resistant water proofing plywood interior grade, Prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work , fixed in repairs complete all as specified and directed.

M &L for 18 mm thick Prelaminated termite resistant water proofing plywood interior grade, Prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work , fixed in repairs complete all as specified and directed.

S&F Health faucet (Jet Spray), CP 15mm dia with flexible pipe and fixing nut etc fixed in repairs complete all as specified and directed.

S&F PVC valveless, syphonic action type flushing cistern, low level, 10 litres capacity, white, with inlet, ball, valve, float and handle including brackets fixed in repair complete all as specified and directed.

S&F Stainless steel sinks with drainage board 1mm thick with plugs, washers and waste; incl bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm, bowl size 410 x 330 x 160mm, fixed to repairs complete all as specified and directed.

S&F Chromium plated shower rose with or without swivel joint,100 to 125mm size, including fixing to steel pipe or union, fixed in repairs complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550 x 400mm including brackets and waste coupling complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 450 x 300mm including brackets complete all as specified and directed.

S&F Vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) , P trap/S trap etc fixed in repairs complete all as specified and directed.

S&F Vitreous China Wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) fixed in repairs complete all as specified and directed.

S&F15mm dia bore bib taps of cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F in repairs Pillar taps, fancy type, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F Stop/angle valves, 15mm dia,fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S&F Stop/angle valves, 15mm dia for shower rose, fancy type chromium plated cast copper alloy,with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S&F 20mm dia Gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed fixed in repairs complete all as specified and directed.

S&F in repairs 32/40mm dia expandable type PTMT waste pipe for Wash hand basin/kitchen sink complete all as specified and diercted.

S&F 25mm dia Gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 15mm dia chromium plated cast copper alloy fancy type, two in one combination of bibtap and angle valve fixed in repairs

Taking up or down steel tubing and connections, bore of pipe 15 mm complete all as specified and directed.

S&F 15mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections, bore of pipe 20 mm complete all as specified and directed.

S&F 20mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections, bore of pipe 40 mm complete all as specified and directed.

S&F 40mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling water tanks capacity exc 250 ltrs & n exc 500 ltrs complete all as specified and directed.

Dismantling water tanks capacity exc 500 ltrs and n exc 1000 ltrs complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position,500 ltrs capacity complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank, ISI marked of capacity 1000 ltrs hoisted and fixed in position all as specified and directed.

S & F in repairs PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F in repairs PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Demolition of wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, incl cover fillets complete all as specified and directed.

M&L for False ceiling using GI snap grid system with roll-formed out of hot-dip galvanised steel capping (powder coated), main runner 38x24mm, cross Tee 29x24mm and wall angle 24x24mm and thickness not less than 1 mm, members suspended with Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long , with 4mm thick designer ceiling board of any texture (Lake & hill, Oceanic, cascade or Electra) as approved by GE, all as per Everest Ceiling grid system "Regular T-2430" or its equivalent make of "Ramco/Charminar/Armstrong" complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster on brick/stone walls incl racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering on brick wall/ concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces of walls in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L Preparation of newly plasterd surfaces surfaces of walls and applying 3 coats of white wash include preparation of wall complete all as specified and directed.

M&L for applying two coats of oil bound distemper on surfaces of walls over two coats of wall care putty including removal of existing treatment and a coat of priming paint on old wall surfaces complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for sunken floor treatment by providing injection pressure grouting treatment using cement slurry mixed with grout admixtures non shrink additive using 40 PSI pump complete and applying two coats of brush bond acrylic polymer modified cement based coating thickness 1mm or two coats of pidifin 2K acrylic polymer water proof coating including necessary surface preparation , providing 20mm thick water proofing screed bed /plaster in CM 1:4 mixed with conplast x 42IC @ 100ml or Pidiproof LW @ 200ml per bag cement. Two coats of Nitro proof 100 bitumen based water proofing over plastered surface complete all as specification of chemical resistant coating complete all as directed by Engineer in Charge. Note: The work shall be executed through authorised applicator of M/s FOSROC/Pidilite using the amterials supplied by M/s Fosroc chemicals India Pvt ltd or M/s Pidilite industrial Ltd and in accordance with their respective manufacturers instructions.

M & L for 300mm thick lime concrete with lime mortar 1:3 mix and 40 mm graded brick coarse aggregate in sub-floors complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L for white coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for white glazed ceramic tiles (300x200)x 6-7mm thick, as in skirting/ dado set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile complete all as specified and directed.

M&L for 25mm thick cement concrete type B1 1:2:4 (20mm stone aggregate) as in sub floor, sub bases, floors and pavings etc complete all as specified.

M&L for backing coat /screed 10mm thick in CM 1:4 on fair faces of brick/ stone wall surfaces complete all as specified and directed.

S & F Cast iron floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F Cast iron nahani trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.45mm to 0.50 mm thick of any colour having tensile strength 550 mpa as in ridges, fixed with self tapping screws all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Rolled mild steel work in purlins, rafters, roof truss etc incl cleats/distance pieces etc complete, conforming to Fe-410 W (Gde-E-250) Quality A complete all as specified and directed.

S&F Rolled Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L for servicing of split type AC unit of any capacity/any make by removing dust with suitable method, cleaning of air filters, tightening of loose wire, nuts, bolts, washers, servicing of condenser motor/ blower, by oiling, greasing, required welding/bracing, replacement of worn out rubber bushes of condensor motor, setting of grill alignment & knobs, Checking for any leakages, provision of thermocoal for air tightness, testing etc all as specified and directed.

Removing the unserviceable compressor from Split type AC and supply and fix new compressor suitable for 1.5 Ton split type A/C all including fixing in original position, connecting up, testing, gas charging, pressure testing, cleaning, condensing and cooling coils, welding, bracing and also including required length of capacity tube and strainer/filter and painting of base plate complete all as per existing one and as directed by Engr-in-Charge. (charging of gas shall be measured and paid separately) Make : Kirloskar/Mitsubhishi/Bluestar/Tecumseh or equivalent all as specified and directed.

Charging of gas refrigerant in split type AC 1.5/ 2 ton cap. of any make including flushing down refrigerant system with nitrogen gas, checking the leakage and rectification of any defect complete all as specified and directed.

Supply and fix in replacement blower motor/condenser fan motor suitable for Split type AC 1.5/2 Ton out door unit single ended or double ended shaft as per existing one complete all as specified and directed Make: AUE/ Marathon Electric or equivalent

Supply and fix in repair condenser coil made up of copper tubing and copper/aluminium cooling fins all as per sample and as suitable for 1.5/2 Ton capacity split type AC all as specified and directed by engr in charge.

Replacement of starting capacitor suitable for spilit type AC capacity up to 2.0-ton all as specified and directed. Make- EPCOS/ SHARDAUSHA.

Supply and fix in repair running capacitor suitable for window type AC up to 2.0-ton cap all as specified and directed. Make- EPCOS/ SHARDAUSHA.

Supply and fix in repair thermostat switch suitable for spilit type AC 1.5/2.0 ton capacity with temperature differential 2.5 + 1 C and working range 15 C to 30 C all as specified and directed. Make- INDFOSS/ RENUTROL/ DANFOSS.

Supply and fix in repair starting relay suitable for spilit type AC 1.5/2.0 ton capacity all as specified and directed. Make-RENUTROL.

Supply and fix in repair overload protector suitable for spilit type AC 1.5/2.0 ton capacity all as specified and directed. Make-RENUTROL.

Supply and fix in repair cable PVC insulated sheathed 3 core 70 Sqmm all as specified and directed. Make-Havells/ Finolex/ RR Cables

Supply and fix in repair split valve ¼” for split AC 1.5 ton capacity all as specified and directed.

Supply and fix in repair compressor shut off valve 3/8” for split AC 1.5 ton capacity all as specified and directed.

Supply and fix in repair Puff insulation of copper pipe 3/8” (ID) for split AC with white tape all as specified and directed.

Supply and Fix switch piano type single pole one way 5 Amp 240V, 50Hz AC, ISI marked all as specified and directed by Engr In charge

Supply and Fix sockets outlet multi purpose 2 in 1, 3 Pin, 5 Amp 230V, 50Hz AC, ISI marked all as specified and directed by Engr In charge

Supply and fix in repair PCB of Inverter spilit type AC 1.5/2.0 ton capacity all as specified and directed

VVM CONSTRUCTIONS

AM BUILDERS