CWE/D-42/2020-21 PROVN OF TOILET BLOCK AT LOC OF REGIONAL CENTRE II OLD CENTRAL ORG ECHS LOC UNDER GE EAST DELHI CANTT 10

Amount

Surface dressing n.exc 15 cm deep in soft/loose soil, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out and getting out in soft/loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation filing and similar work complete all as specified & directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintes,cantilevers, shelves including supports, overhangs, etc also splays beteen floors and beams finished rough surfaces of concrete ccomplete all as specified and directed.

Formwork to chajjas, chullah hoods, similar items including edges complete all as specified and directed.

Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping) complete all as specified and directed.

M & L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed.

M&L for RCC M-25 (20mm graded aggregate) as in foundations footings, plinth beams etc complete all as specified and directed.

M&L for RCC M-25 (20mm graded aggregate) as in columns, pillars etc complete all as specified and directed.

M&L for RCC M-25 (20mm graded aggregate) as in beams, lintels etc complete all as specified and directed.

M&L for RCC M-25 (20mm graded aggregate) as in chajjas etc complete all as specified and directed.

M&L for RCC M-25 (20mm graded aggregate) as in slab type Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F TMT bars upto 10mm dia and over, cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia complete all as specified and directed.

M&L brick work with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:6 complete all as specified and directed.

M&L half brick wall with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:4 acomplete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed..

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L Rendering 5mm thick on concrete surfaces in CM 1:4 as on ceiling all as specified and as directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified & directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, paneling of plain color PVC sheet to be fitted in the MS frame, welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent complete all as specified & directed.

S&F aluminium colour powder coated anodised door and shutter single or double leaf glazed/pre laminated board exterior quality partly glazed//pre laminated board exterior quality party glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete all as specified and directed. comprising the following:- (a) Aluminium colour anidised door frame section 101.60x44.45x 3.01 mm fixed as per specified (b) Aluminium colour anodised vertical section in shutter 85x44.45x 3.01 mm as per spd. (c) Aluminium colour anodised Top & style shutter section 95.25x44.45x3.01 mm as per spd. (d) Aluminium colour anodised handle 02 Nos in each shutter 200 mm long as spd. (e) Aluminium colour anodised handle 02 Nos in each shutter 150 mm long as per spd. (f) Aluminium colour anodised middle lock rail/bottom rail section 150x44.2.65mm cat No.20002. Make-Jindal (g) Six lever mortice lock brass Make : Godrej/Classic on in each door (i) 12 mm thick particlular board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass/Plain glass 5mm thick Make : Saint Gobain, Modigaurd (f) Aluminium Anodized colour powder coated coated grill make deco grill DG-104 fixed with For H Section.

S&F aluminium colour power coated anodised (shade or tint as directed by GE) window/ventilator frame section 100x44x2mm fixed with thrust bolt in walls by drilling (any number of leaf) complete all as specified and directed. the following:- (a) Aluminium colour anidised (shade or tint as directed by GE) shutter 44x44x2mm top/bottom/sides style. (b) Aluminium colour anodised butt hinges 4 Nos in each window 100 mm sizes as per spd. (c) Aluminium colour anodised tower bolt 3 Nos in each window 150 mm long as per spd. (d) Aluminium colour anodised handle 2 Nos in each window 150 mm long as per spd. (e) Tinted glass 5 mm thick Make-Saint gobain modigaurd (f) Aluminium Anodized colour coated grill make deco grill DG-104 fixed with For H Section. Make : Jindal or equivalent

M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.

M & L hardcore of broken stone or boulders of gauge exc.63mm but n exc 100mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

M&L Non skid ceramic tiles (400x400x7mm thick) in floors set and jointed in neat cement slurry and painted with colour cement to match including Screed bed (or) bedding layer of mortar 15mm thick for laying floor finishes CM (1:6) complete all as specified and as directed.

M&L Glazed ceramic tiles 300x450x7mm thick, in vertical surfaces such as skirting & dados set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick CM 1:4 on brick masonry/concrete surfaces finished even to receive tiles complete all as specified and as directed.

M & L 75mm th PCC 1:3:6 type C-2 as in sub base, Floors, Paving, plinth protection, finished even and fair without using extra cement complete all as specified.

S&F125 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 125mm size aluminium handles,cast type,anodised complete all as specified and directed.

S&F 100mm butt hinges extruded aluminium alloy with galvanised MS pin anodised type C22 complete all as specified and directed.

S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I Incl.dismentling of existing tank and removing to store complete all as specified and directed.

S & F gun metal globe or gate valve with iron wheel screwed both edns for iron pipe of 20 mm dia complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed.(Minimum weight 210gm) complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Material and labour for APP polymaric water proofing membrene minimum 3mm thick and weighting not less than 3.6 kg / sqm of make 'Moply FP' manufactured by STP Texsa Ltd or' Hyper Plas' ( polyster) manufactured by M/S IWL Ltd or'Shaliplas' (polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd or 'Mak polyplast' manufactured by M/S M K Petro as approved by GE , black finished reinforced with non weven polyster matt,with fusable inish laid over compatable bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with f a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufactur's instructions including 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with f a over lap of 75mm at the sides and100 at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufactur's instructions including preparation of surface, complete all as specified and as directed. Note : the water proofing treatment shall be carried out by the manufacturer or their authorised applicators.

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed.

M&L three coat of white wash including preparation of new surfaces as on walls complete all as specified and as directed.

M&L three coat of white wash including preparation of new surfaces as on ceiling complete all as specified and as directed.

Cutting chases, pinning in , for concealed water tubing on block walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed.

S&F 15mm dia Bib tap cast copper alloy chromium plated fancy type with cutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F PVC connection 15x450mm size complete all as specified and directed.

S&F 10 Ltrs (PVC) white, valve less, syphonic action type, dual type fluhsing cistern, low level with inlet ball valve, float and top push button type, complete all as directed. Note:- The rate for fixing flushing cistern are deemed to be included with the rate of fixing water closet any type.

S&F 32mm dia flush pipe of polythelene of low or high density, for low or high level flushingh cistern complete all as specified and directed. . Note:- The rate for fixing flush pipe are deemed to be included with the rate of fixing water closet any type.

M&L Cast iron floor/nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including P or S trap including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and as directed.

S&F oval type vitreous china,white, wash hand basin, flat back size 550x400mm including cutting for and pinning in, but excluding waste pipe complete all as specified and as directed

M&L 18-20mm thick granite slabs of any type machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 15mm thick screed bed in CM 1:6, including grinding and polishing complete all as specified and directed.

S&F Soap dish vitreous China white, approximate size 160x 160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges, complete all as specified and directed.

S&F15 mm dia Pillar taps cost copper alloy chromium plate screwed down high pressure with or without Hot or Cold with long screw shanks screwed for iron pipe or union complete all as specified and directed.

S&F over head shower rose CP Brass with shower arm for 15 mm bore pipe of size 150x150mm complete all as specified and directed

S&F in repairs 15 mm bore stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed. .

S&F 32 mm spring type PVC waste pipe fixing of WHB etc complete all as specified and directed

S&F 100 mm 'P' or 'S' Traps complete all as specified and directed

S&F PVC (SWR) 110mm pipes single/double socketed, in any length with rubber ring joints laid in treanches or in floors complete all as specified and directed.

S&F 110 mm PVC (SWR) bends complete all as specified and directed.

S&F 75/100 mm PVC (SWR) vent cowl complete all as specified and directed.

S&F vitreous china urinal full stall type white (excluding flushing cistern, flush pipe and waster pipe) complete all as specified and directed.

S&F 100mm stack clamps out of 50 mm by 5 mm flat irom and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out and getting out in soft/loose soil complete all as specified and directed.

M& L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling mss concrete and similar work as required complete all as specified and directed

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia SWSW pipe complete all as specified & directed.

S&F 150mm internal dia of DWCPE pipes laid in trenches and jointed with cement mortar 1:3 complete all as specified and directed.

M& L providing precast Reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in mainhole/drain cover slabs including necessary form work etc. Complete Note : Reinforcement shall be measured and paid seperatly)

S&F TMT bars upto 10mm dia and over, cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.

M&L brick work with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:4 all as specified and as directed.

M & L PCC ( 1 : 2 : 4) type B-1 as in haunching coping paddings etc including necessary form work all as directed.

M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed.

Supply only integral water proofing compound complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified & directed..

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for hard standing etc complete all as specified & directed.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & directed..

M & L hardcore of broken stone or boulders of gauge exc.63mm but n exc 100mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.

M & L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base 75 mm thick complete all as specified & directed.

M&L for sand filling under floor or in fdn including watering and consolidation complete all as specified & directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified & directed.

M & L for Providing, cement concrete 1:2:4 Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs of mud stops, rounded or chamfered on edges complete all as specified & directed.

M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing switches/sockets/fan regulator etc , with and including bakelite sheets of suitable size and making good surface as original by plastering, whitewash/colour and distemper etc complete all as directed for the following :-

(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

(b) one socket outlet point 5 amps on the same board.

(c) one socket outlet point 5 amps on the independent board.

Supply and fixing of Switch piano flush type, single pole, one way, 5/6 Amps complete all as directed.

Supply and fixing of socket two-in-one, 5 pin, 5/6 Amp universal type complete all as directed.

Material and labour for laying of LT underground cable XLPE insulated, PVC sheathed, galvanised steel strip / wire armoured, aluminium conductor, 1100 volts grade, of size 16 Sqmm 2 core suitable for earthed system laid in duct / trench / along pole / wall etc including making connection complete all as specified and directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.2. The excavation, earth work, sand cushioning and brick protection etc will be measured and paid separately under respective items.

Excavation in trenches in loose/soft soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out including forming bottom surface for laying LT cable complete all as specified and directed.

M&L for sand cushioning to under ground cable provided with layers of sand(8 cms deep before laying the cable and 15 cms deep after laying) complete all as specified and directed.

Supply and laying burnt bricks class - B for protection of cable complete complete all as specified and directed.

Returning filling in soil including spreading, levelling, watering and well rammingin layers not exceeding 25 cm complete all as specified and directed.

Removing exccavated soil not exceeding 50 mtr and depositing wheredirected at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M & L in replacement for laying of Galvanised Iron tubes light grade 50mm dia for cable protection at site complete all as specified and directed.

M&L of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps with and including pressed steel powder coated MS sunken box of suitable size, covered with & including 3 mm thick bakelite, laminated hylem sheet top cover and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as specified and directed.

Supply and fixing of LED tube light fitting 22 W to wall mounting type with and including all electric connections with two core PVC insulated, PVC sheathed copper conductor flexible cable complete all as specified and directed.

Supply and fixing of fresh air fan 250 mm sweep plastic body with self closing louvers including making hole of appopriate size and making all electric connections complete all as specified and directed.

Supply and fixing of 12 watt LED mirror light fitting (Fancy Type) and making all electric connections complete all as specified and directed.

M&L for Sub main wiring with 2 run of 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified and directed. .- Make of copper wire :-RR Cable/Havells/ Standard. Note : 1. The conduit and conduit accessories shall be measured and paid as one unit. 2. The cost of earth wire is included in the quoted rates.

Supply and fixing of sheet metal enclosure, SPN type with two pin & earth plug and socket (Industrial type DB) with and including one MCB SPN, C Curve type of capacity 32 Amp, 10 kA complete all as specified and directed.

Supply and Fixing of storage water heaters 35 ltrs capacity ISI Marked,five star rating with SS tank complete including necessary fasteners, pvc connections and including making necessary electric/water connection including mason works complete all as specified and directed.

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 08 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as specified and directed. .

S & F of MCB SP C Curve type suitable for 240 volts AC supply, with over load and short circuit protection and rupturing capacity not less than 10 KA as specified and 10 to 32 Amps.

S & F of MCB SPN C Curve type suitable for 240 volts AC supply, with over load and short circuit protection and rupturing capacity not less than 10 KA as specified and 40 to 63 Amps.

Supply and fixing of LED security light luminaire 45 watt (white) Five star Rating pressure die cast aluminium housing with heat resistance toughned glass & IP- 66 protection with and including driver/transformer complete all as directed.

Supply and fixing of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as specified and directed.

Material and labour for earthing complete with GI earth plate electrode 600 mmx 600mm x 6mm thick burried directly in ground not less than 2.25 mtrs below ground level, with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20 mm dia for watering pipe with funnel, wire mesh, salt, charcoal dust and excavation complete all as specified and directed.

Som Nath Kakkar

The new hut furnitures

M/S GR construction compony