16/EDC(S)/2025-26

Amount

PART-A (Material)

Following Materials Supplied by the Contractor :-

F-Bracket.

P.G. Clamp.

T-Off Holding Clamp.

Guarding Clamp.

F-Bracket Holding Clamp.

X-Arm Holding Clamp.

Nuts & Bolts.

Cross Bracing Clamp With Bolt & Nut.

GI Pipe 6 Inch Dia (Per Pipe 10 Fit).

Red Oxide Paint.

Alluminium Paint.

Safe carriage/cartage of following items from Store Centre, Sultanpur to work site including loading, unloading and proper stacking (distance within 0-70 Km.)

Safe carriage of STP 11 Mtr.

Safe carriage of PCC Pole 8.5 Mtr. Long.

Safe carriage of ACSR Weasel Conductor.

Safe carriage of 11 KV XLPE Cable Al. 3x120 sq.mm.

Safe carriage of 11 KV XLPE Cable Al. 3x300 sq.mm.

Safe carriage of Meter Cubical.

Safe carriage of CT/PT Combinud Unit.

Safe carriage of T/F 250 KVA.

Safe carriage of 11 KV VCB Pannel Outgoing CTR 200/100/05 Amp.

Safe carriage of 11 KV Incoming CTR 600/300/5A, 350 MVA 24V (1250 Amp.)

Safe carriage of Other Line Materials.

Dragging of STP from site to pit point.

Dragging of PCC Pole from site to pit point.

Fabrication, Erection & Painting of Single Pole 11 Mtr support on STP including digging of pit & fixing of all accessories and clamps as per RESPO norms.

Fabrication, Erection & Painting of Double pole 11 Mtr support on STP including digging of pit & fixing of all accessories and clamps as per RESPO norms.

Fabrication, Erection & Painting of Three pole 11 Mtr support on STP including digging of pit & fixing of all accessories and clamps as per RESPO norms.

Fabrication, Erection & Painting of Four pole 11 Mtr support on STP including digging of pit & fixing of all accessories and clamps as per RESPO norms.

Fabrication & Erection of Double pole support on PCC pole including digging of pit & fixing of all accessories and clamps as per RESPO norms.

Grouting of Structure by digging of pit 1.83 Mtr. Deep for 11 Mtr STP/8.5 Mtr PCC Pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 Ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 Mtr STP/8.5 Mtr PCC Pole plinthing 0.3 Mtr above G/L and Proper plastering as per RESPO norms.

Earthing of 11 Mtr STP/8.5 Mtr PCC Pole as per RESPO norms.

Stay Complete. as per RESPO norms.

Laying Stringing & sagging of New ACSR Weasel Conductor including binding jumpering etc. as per RESPO norms.

Laying of cable 11 KV XLPE cable 3x300 sq.mm including sands & brick. as per RESPO norms.

Digging of Trench & Laying of double circit cable 11 KV XLPE cable 3x120 sq.mm including sands & brick. as per RESPO norms.

Hanging Hoisting & clamping and G.I. Pipe Channel nut & Bolts 3x120 sq.mm XLPE 11 KV Cable (Cost of all accessories will be borne by contractor) as per RESSPO Norms.

Installation and Fixing of Heat Shrinkable Type 11 KV Cable joiting Kit 3x120/3x300 sq.mm XLPE Cable Box as per RESPO norms.

High Pressure testing after completion of laying of 11 KV XLPE cable, Fixing of joints & termination. (Testing equipment shall be arranged by the contractor). as per RESPO norms.

Making cable jointing kit I/D & O/D 3X120/3x300 sq.mm. as per RESPO norms.

Installation of Meter Cubical. as per RESPO norms.

Installation of CT/PT Combind Unit. as per RESPO norms.

Installation of 11 KV VCB Pannel Outgoing CTR 200/100/05 MVA with 11 KV Cable Jointing Kit O/D XLPE (3x120/3x300) sq.mm. including laying, termination grouting of cable and earthing of pannel. as per RESPO norms.

Installation of 11 KV Incoming CTR 600/300/05A 350 MVA, 24V (120 Amp) with 11 KV Cable Jointing Kit I/D XLPE (3x120/3x300) sq.mm. as per RESPO norms.

Route Cable Marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with Notice "11 KV U/G Line" Painted on it (All the material, Manpower and T&P will be arranged by the contractor at his own cost).

Road Restoration Charges for Footpath Side.

Installation of 250 KVA T/F on plinth. as per RESPO norms.

Supply and Installation of Tail less Fuse Unit 300 amp., Al. Lug 400 mm. & L-Clamp (Copper) with structure and associated work For 250 KVA Transformer. as per RESPO norms.

Pipe Earthing of 250 KVA Transformer (By boring of 4 inch diameter 20 m deep, 40 mm diameter A class GI pipe is inserted to a depth of 20 m and a holed pipe of 1.5 m length is inserted at the bottom. Tighten one end of the MS strip of size 50x6mm with the nut bolt with the neutral of the converter and weld the other end with the GI pipe inserted in the boring for earthing. Putting a socket on the upper part of the pipe (mouth) so that water can be poured into it to retain moisture. To complete the work Contractor will provide all material, Manpower, T&P, safe carriage of material to worksite as per RESPO norms.

Clearance (NOC) from Electrical Safety Department UP State for Energization of 11 KV Line & Transformers etc with the condition for actual amount paid by contractor, As per Receipt Produce with bill at time of payment. (Maximum Rs. One Lakh Only)

Supply & Erection Danger Board (All the material, Manpower and T&P will be arranged by the contractor at his own cost). as per RESPO norms.

Tree Branch Chopping.

Providing and Fixing of G.I. Barbed Wire.

Hindustan Electric Work (BID ID -5516794)

M/s S S Associates (BID ID -5520890)