PROVN OF BATHROOM COMPLEX NEAR BLDG NO. T-1 IN ZONE 17 AND 01X TOILET BLOCK NEAR BLDG NO. P-23 IN ZONE 10 AT TALBEHAT MIL STN

Amount

M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3 type A-1 for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3 type A-1 for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3 type A-1 for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3 type A-1 for Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed.

Cutting openings, through brick walls built in cement mortar for door, windowand other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m ®

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size bricks, complete and all as specified and directed

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in, built in cement mortar 1:4 using old size bricks, complete and all as specified and directed

M&L PCC (1:4:8) type D-2 (using 20mm graded stone aggregate) 75mm thick as in sub base of floors all as specified and directed.

M&L PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) 25mm thick as in floors all as specified and directed.

M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished cement concrete surface even & smooth with out using extra cement laid in alternate bays n.exc 2m in length all as specified and directed.

M&L for Hardcore Broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L rendering 10mm thick in cement plaster 1:4 on surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L of water proofing treatment to non accessible roof slab with APP based modified polymeric membrane centre core 100mm micron HMHDPE outer film 20 micron each having thickness 3mm, weight not less than 3Kg/Sqm as per manufacturers instruction with torch application complete all as specified and directed by Engineer-in-Charge with following course of description below: (a) First coat apply bituminous primer confirming to IS-3384of 1965 @ 0.4Kg/Sqm to be applied on prepared roof surface till the surface is properly inpregnated .(b) Second course of laying of APP based modified polymeric with 100mm overlap in longitudinal direction 150mm in tranverse direction sealed and bounded to the surface by torch application method. All joints and changes in all direction should be covered with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane (c) Third course of apply a coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membrane Note:- (i)Work of water proofing treatment shall be carried out by the authorised appllicator of the manufacturer. (ii) The quoted rates is deemed to include for the cost of scaffolding, T&P etc required for execution of the work.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete all as specified and directed.

S&F Mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified specified and directed by Engineer-in-Charge. Note:- Glass and Wiremesh paid Seprately.

S&F in position 4.8mm thick frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium framen n. exc 0.5 sqm in each pane all as specified and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete all as specified and as directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stile and plain colour PVC sheet for top rail lock rail &bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed.

S&F butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F of 200mm aluminium alloy tower bolts, stove enamelled black with bright bolt complete all as specified and directed

S&F of 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified

M&L rendering 5mm thick in cement plaster 1:3 on ceiling surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 10mm thick in cement plaster 1:6 on internal surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 15mm thick in cement plaster 1:4 on external surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L for preparation of new plastered surfaces of walls and applying two coats of Cement base paint all as over a coat of primer complete all as specified and directed

Material and labour for preparation of newly plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M &L for coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed in CM (1:6) complete all as spd and as directed..

M&l galzed colour ceramic tiles in vertical surface 450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick cement plaster in CM 1:4 complete all as specified and directed.

Vitreous china urinal partition white of size 310x700 mm. about 40cm above floor line, complete all as specified and as directed.

S&F vitreous china squatting pan Orissa pattern size 580 x 440mm with integral foot rest inluding 'P' or 'S' complete and all as specified and directed.

S&F in Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) including all fittings complete all as specified and as directed.

S&F stainless steel Chromium plated jet spray plated,with one meter long flexible pipe complete all as specified and directed.

S&F for health faucet chromium plated,with hose &hook Make:- parryware, prayag, Jaquar

S & F in repair 15mm bore light angular stop valves with wall flange, Half Turn / Quarter turn, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern low level white inlet, ball valves float valves & handle including brackets of 10 litre capacity including down take pipe 32mm dia and making good disturbed portion in CM(1:4) complete all as specified and directed.

S&F 15 mm dia bore pvc connections with PTMT nuts of length 600 mm long complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bend complete all as specified and directed.

S&F 110mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F PVC(SWR) Vent cowl 110mm dia complete all as specified and directed.

Grating doom 125mm dia of PTMT (Minimum weight 25gms)

S&F rotational moulded polethylene water tank of 500Ltrs capacity (Cylindrical vertical with closed top) noticed and portion, threaded lid tie with wire, complete all as specified and as directed.

S&F rotational moulded polethylene water tank of 1000Ltrs capacity (Cylindrical vertical with closed top) noticed and portion, threaded lid tie with wire, complete all as specified and as directed.

S&F 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 of fixed complete to walls, ceilings or in floors and including all type of fittings etc complete all as specified and as directed.

S&F 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 of fixed complete to walls, ceilings or in floors and including all type of fittings etc complete all as specified and as directed.

S&F Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm dia Stop valves, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm soap tray embedded in the wall complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair Oval shape WHB size 560 x 410mm of including brackets,including CP waste coupling 32mm,waste pipe complete all as specified and directed.

M & L for 20mm thick granite on kitchen platform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.

Moulding as In edge of granite platform complete all as specified & directed.

S&F bevelled edge looking mirror 5.5mm thick of size 60cmx 45cm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws completeall as specified and directed.

S&F bevelled edge looking mirror 5.5mm thick of any size mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as spfd and directed by Engr-in-charge.

Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) incl 32mm coupling,brackets & waste pipe 32mm dia complete fixed on wall or erecting stand complete all as specified and directed.

S&F 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 32mm dia coupling of PTMT suitable for urinals, (Minimum weight 32mm-45gms

Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)

Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

M&L for Excavating over areas, n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed.

item no 1 above but each additional 1.5 m or part thereof in depth beyond the first 1.5 m getting out soft/loose soil complete all as specified and directed.

M&L for RCC nominal mix 1:2:4 type B-1 20mm graded stone aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC nominal mix 1:2:4 type B-1 20mm graded stone aggregate for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size bricks, complete and all as specified and directed

M&L for PCC 1:2:4, type B-0 using 12.5mm graded stone aggregate as finishing concrete surface, channel benching of manhole, laid to shape,coping and slope surfaces finished even and smooth using extra cement including necessary form work etc complete all as specified and as directed

M&L rendering 15mm thick in cement plaster 1:4 on surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L for PCC 1:2:4, type B-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L for 150 mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as specified and directed.

M&L for concrete bed for 150 mm bore pipe in laid with PCC 1:4:8 type D-2 to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Providing precast cement concrete type B1 1:2:4 20 mm graded aggregate as in cover slabs for septic tank/ manholes/drains set in cement Mortar 1:4 complete all as specified and as directed.

M/L for point wiring concealed type with 1.5sq mm FRLS PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drown through in and incl FRLS PVC rigid conduit not less than 20 mm dia with its accessories pressed steel terminal box incl 3mm thick ISI marked laminated sheet cover for fixing switches/socket/regulators etc for the following: Note:- On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit/PVC Casing caping and its accessories.

One light/fan point controlled by one No piano type switch 5 Amps single pole one way

One socket outlet 5/3 pin 6 AMPS controlled by one switch on the same board.

One socket outlet 5/3 pin 6 AMPS controlled by one switch on independent board.

S&F Switch Piano Flush button single pole one way 5/6 Amp.

S&F socket outlet 2 in 1, 3 pin & 2 pin, 5/6 Amp, 240 volt.

S&F ceiling rose surface bakelite 65mmx50mm 100watt three terminal.

S&F Lamp hoder/Batten holder PVC/Polycarbonate insulated body with metal ring and back plate for batten fitting.

S&F sheet metal enclosure double door for MCB DB single pole and neutral 4 way with 200 Amps rated bus bar 240 volts double door (Metallic) type.

S&F MCB SP 5 to 32 Amps 240 volts 'C' series, 10 KA, 50 Hz including connection in the DB and testing/commissioning. Make:- As approved Make of DB

S&F MCB SPN upto 32 Amps 240 volts 'C' series, 10 KA, 50 Hz. Make:- As approved Make of DB

Supply and fixing LED lights fitting 1x 18W, 4 feet, 220V,AC decorative box type with driver, holder including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F LED Lamp 9W B22 Type all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm

Supply and lay steel water tubing GI Medium grade ISI Marked 20 mm dia bore with all necessary fittings and fixtures laid in trenches or fixed to wall etc complete including cutting and fixing with existing pipe all as specified and directed by Engr-in-Charge.

Supply and lay steel water tubing GI Medium grade ISI Marked 25 mm dia bore with all necessary fittings and fixtures laid in trenches or fixed to wall etc complete including cutting and fixing with existing pipe all as specified and directed by Engr-in-Charge.

Excavation in soft/loose soil trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out incl old U/s cable cover of any type , taking out/laying/cleaning/repairing of CI/GI pipe line, cable etc including making good to disturbed surfaces complete all as specified and directed.

Returning, filling in & including spreading, levelling & well ramming in layers not exceeding 25 cm thick as in soft/loose soil complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 mtr depositing where directed at a level not exceeding 1.5 mtr above ground level complete all as specified and directed.

S&F Gun metal gate valve 20 mm dia ISI Marked with iron wheel head screwed both ends for iron pipes all as specified and directed by Engr-in-Charge.

S&F Gun metal gate valve 25 mm dia ISI Marked with iron wheel head screwed both ends for iron pipes all as specified and directed by Engr-in-Charge.

Supply and laying or fixing or passing through pipe in replacement, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1.00 meter apart including 4mm dia suspension wire one twin core cable flat or circular of size 04 sqmm 2 core complete all as specified and directed by Engineer in charge.

S&F house service bracket hook type complete with 3.00 Mtr Long GI Pipe 40mm dia medium grade, 02 Numbers 90 degree bends MS hook and stay or guy.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in electrical plate No 3 of SSR Pt I including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick pre cast RCC ( 1:2:4) type B-1 cover slab framed with 50X30X4 mm MS angle (reinforced with 6 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar) including providing charcoal or coke and magnesium sulphate in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh, copper lugs, complete in all respect., GI earth wire protected by 40 mm bore (light grade) galvanized iron pipe and other end connected to the earth bar (test point) made of MS flat (400X32X6 mm) bend in ‘D’ shape and fixed to wall by means of fast nut or bolt grouted in to wall at 1 mtr from plinth height. 4sqmm PVC insulated (colour green) copper conductor single run as earth continuity conductor along with 15 mm PVC conduit grouted in wall or fixed on wall surface to be continued up to main switch board and fix with common earth dolly as directed by EIC . Disposal of soil to a distance not exceeding 50 mtr and necessary testing on completion complete all as specified and as directed.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

M/S Kharya Associates

M/S R.S.BUNDELA & SONS

M/S SHIVA TRADERS

HARNAM SINGH ANIL SINGH

M/S ARVIND SINGH THEKEDAR