Loading
Loading…
Loading…
Tender Value
₹3.0 Cr
EMD Value
₹5.9 L
Closing Date
29 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
ENGG
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.
Defination of Similar Work :- Any Civil Engineering Work / Zonal maintenance works.
21 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person or through post/courier so as to reach the official nominated (i.e.OS/Tenders/Engg/HYB Division) within before closing date for submission of bids.(i.e., excluding the last date of submission of Bids). Railway will not assume any responsibility for any delay in case the BG is sent through courier/postal department. Any BG received by post/courier on or after the closing date of bid submission shall not be taken.
AII the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General instructions / Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-)15% (minus Fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
HYB Division: Annual repairs/maintenance of quarters and service buildings under the Jurisdiction of SSE/W/KCG and SSE/W/WW/SC of ADEN/Estates-II/HYB for a period of one year (2026-2027)
66_DRM_W_HYB_26
66_DRM_W_HYB_26
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹5.9 L
29 Jun 2026
4 Jun 2026
15 Jun 2026
82 items across 1 schedule · ₹67,52,753.06 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Natural (nature) art Painting on Walls with "CHERIYAL" scroll painting depicting the series of Telangana folk tradition confined to the village Habitment by CHERIYAL. Artists using bright and bold colours at Railway Premises above 4.0 m and upto 8.0 m height with all contractor's artists, helpers, colours, tools and plants etc. as per required and as directed by the engineer-in-charge including GST. | Sqm | 100.00 | 1,936.8 | 1,93,680 |
| 2 | Supplying and fixing premium quality Waste coupling of size 32mm with 125mm / 1 3 0 mm length of standard make: Parryware / Johnson / Hindware / Jaquar as desired by Engineer in charge with all contractors transportation, materials, tools, adhesive, labour, lead, lift , taxes etc completed and as per the instructions of engineer in charge at site. | Each | 50.00 | 912 | 45,600 |
| 3 | Supplying and fixing premium quality Pillar Cock extended body size 310mm / 3 2 0 m m and aerator of standard make: Parryware / Johnson / Hindware / Jaquar as desired by Engineer in charge, with all contractors transportation ,materials, tools, adhesive, labour, lead, lift , taxes etc completed and as per the instructions of engineer in charge at site. | Each | 60.00 | 4,626 | 2,77,560 |
| 4 | Supplying and fixing premium quality 32mm Bottle trap with connection of size 150mm / 190 mm / 250 mm of standard make: Parryware / Johnson / Hindware / Jaquar as desired by Engineer in charge with all contractors transportation ,materials, tools, adhesive, labour, lead, lift, taxes etc completed and as per the instructions of engineer in charge at site. | Each | 30.00 | 2,290 | 68,700 |
| 5 | Supplying and fixing premium quality Towel Rail Ends Pair with 60cm SS Rod of standard make: Parryware / Johnson / Hindware / Jaquar as d e s i r e d b y E n g i n e e r i n c h a r g e w i t h all contractors transportation ,materials, tools, adhesive, labour, lead, lift , taxes etc completed and as per the instructions of engineer in charge at site. | Each | 25.00 | 718 | 17,950 |
| 6 | Supplying and fixing premium quality Table top Wash Basin of size 485X370X110 mm or desired s i z e , c o l o u r S n o w W h i t e of standard make: Parryware / Johnson / Hindware/ Jaquar as desired by Engineer in charge with all contractors transportation, materials, tools, adhesive, labour, lead, lift , taxes etc completed and as per the instructions of engineer in charge at site. | Each | 5.00 | 8,866 | 44,330 |
| 7 | Supplying and fixing looking mirror 6mm thick with polished beveled edges fixed on stainless steel studs with all contractors men, materials, tools and plants, all lead and lift, taxes etc., including scaffolding and as directed by the Engineer-in-charge at site. | Sqm | 40.00 | 2,688 | 1,07,520 |
| 8 | Supply, errection and commissioning of hot pressed moulded thermosetting glass Fibre reinforced polyester resin (GRP) sectional water storage tanks confirming to IS 14399 (Part - I & II) on Railways existing staging/roof top including all accessories like external bracing, L brackets, manhole & drain panel assembly etc., including providing and fixing required fittings for inlet, outlet/delivery, drain and outflow pipes with all contractors labour, tools and plants, material, all lead & lift taxes complete for tanks of height 1M- For a capacity Upto 10,000 Litres | Litre | 20000.00 | 34.38 | 6,87,600 |
| 9 | Providing and fixing 'L' shape toilet cubicle comprising of Divider panel and door shutter side panel of required size/width/height according to site measurements with 12mm thick High pressure laminate board of make Green Lam/Merino or Similar approved brand of monolithic homogeneous material of compact laminate board with solid phenolic board of decorative panels manufactured by simultaneous pressing of layers of Cellular fiber material impregnated with thermo setting resins and specially pre-treated craft paper subjected to both pressure and heat, including SS legs of height 100mm form floor level , Aluminium "U'section at corners, 'L' section at end/'H' section at middle and Aluminium round Shape tube of top rail with all contractors fittings like SS screws, wall plugs, SS gravity hinges 3 nos, SS door knobs two side operation, SS lock set with indicator, SS Coat hook with Door topper etc, labour, material, tools &plants, all lead & lift, transportation, wastage etcas per the specifications and instructions of Engineer in charge at site. | Sqm | 50.00 | 12,120 | 6,06,000 |
| 10 | Providing and fixing of Divider panel shutter of required size/width/height according to site measurements with 12mm thick High pressure laminate board of make Green Lam/Merino or Similar approved brand of monolithic homogeneous material of compact laminate board with solid phenolic board of decorative panels manufactured by simultaneous pressing of layers of Cellular fiber material impregnated with thermo setting resins and specially pre- treated craft papersubjected to both pressure and heat, including SS legs of height 100mm form floor level , Aluminium "U'section at corners, 'L' section at end / 'H' section at middle and Aluminium round Shape tube of top rail with all contractors fittings like SS screws wall plugs, etc, labour, material, tools & plants, all lead & lift, transportation, wastage etc as per the specifications and instructions of Engineer in charge at site. | Sqm | 20.00 | 11,095 | 2,21,900 |
| 11 | Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including providing and fixing arrangement and making necessary holes etc. for fixing required Ozone or similar SS fittings, all complete as per direction of Engineer-in- charge. | Sqm | 20.00 | 5,400 | 1,08,000 |
| 12 | Making connection of GI distribution branch by providing and fixing Reducer of size 50mmx25m outer dia pipe including cutting and threading the pipe etc complete by threading and or welding wherever required, and testing the same complete with all contractor's material, labour, tools, plants, lead, lift etc as per standard specifications and as directed by the Engineer-in-charge. | Each | 40.00 | 114.05 | 4,562 |
| 13 | Making connection of GI distribution branch with GI main of 100mm dia by providing and fixing tee of size 100x100x50mm including cutting and threading the pipe etc complete by threading and or welding wherever required, and testing the same complete with all contractor's material, labour, tools, plants, lead, lift etc as per standard specifications and as directed by the Engineer-in-charge | Each | 40.00 | 1,584 | 63,360 |
| 14 | Providing, jointing and fixing 100mm dia GI pipe in position on walls/other supports, External work including excavation in trenches and refilling after laying Galvanized Mild steel tubes medium grade including providing necessary fittings as per IS specification IS 1239 Part - I and II, including cutting to required sizes as required at site and fixing by threading and or welding wherever required, and testing the same complete with all contractor's material, labour, tools, plants, lead, lift etc as per approved drawing complete as per standard specifications and as directed by the Engineer- in-charge. | Per Metre Length | 50.00 | 1,307.71 | 65,385.5 |
| 15 | Providing and fixing of 50mm (2") Audco Butterfly valve confirming to Relevant Indian standard specifications and of reputed make including necessary fitting like flanges, Gasket etc., to connect the valve to existing pipes (4"/6")/nipple with all contractor's men, materials, tools and plants, lead and lift including crossing of track etc., as per the instruction of Engineer-in-charge at site (Relevant test certificate to be provided). | Each | 10.00 | 2,538.39 | 25,383.9 |
| 16 | Supplying and fixing premium quality Telephonic Hand shower with 5 flows, wall hook, and 1.50 metre hose pipe of standard make: Parryware / Johnson / Hindware / Jaquar as desired by Engineer in charge with all contractors transportation, materials, tools, adhesive, labour, lead, lift, taxes etc completed and as per the instructions of engineer in charge at site.: Shower dia - 75 mm dia (3"). | Each | 30.00 | 2,853 | 85,590 |
| 17 | Supply of quarry/stone dust and stacking at desired location with all contractors materials,labour, lead,lift,tools,plants,crossing of tracks etc.,as per technical specification and as directed by the Engineer-in- charge at site. | cum | 55.00 | 1,324 | 72,820 |
| 18 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in-charge at site- Up to a depth of 100 meters. | RM | 400.00 | 321.9 | 1,28,760 |
| 19 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in-charge at site- For a depth of 101 - 150 meters. | RM | 200.00 | 548.69 | 1,09,738 |
| 20 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in-charge at site- For a depth of 151 - 200 meters. | RM | 200.00 | 834.02 | 1,66,804 |
| 21 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in-charge at site- For a depth of 201 - 275 meters. | RM | 300.00 | 1,207.13 | 3,62,139 |
| 22 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in-charge at site- For a depth of 276 - 335 meters. | RM | 240.00 | 1,668.03 | 4,00,327.2 |
| 23 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in-charge at site- For a depth of 336 - 400 meters. | RM | 130.00 | 2,216.73 | 2,88,174.9 |
| 24 | Drilling of bore well of 165 mm dia (6.5 inches) with suitable Hydraulic Rig for specified depth in all types of soil and rock mechanically with all contractor's tools, plants, material and labour, transportation etc. as per the instructions of Engineer-in-charge at site- For a depth of 401 - 450 meters. | RM | 100.00 | 2,853.21 | 2,85,321 |
| 25 | Providing and fixing on wall face unplasticized Rigid PVC Soil Waste pipes conforming to IS:13592 Type B, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer-in- charge at site. - 75 mm dia | RM | 200.00 | 538.22 | 1,07,644 |
| 26 | Providing and fixing on wall face unplasticized Rigid PVC Soil Waste pipes conforming to IS:13592 Type B, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer-in- charge at site. - 110 mm dia | RM | 200.00 | 762.96 | 1,52,592 |
| 27 | Supply of F.P.S. bricks class designation 5.0 etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | 1000 Nos. | 12000.00 | 4,746.77 | 56,961.24 |
| 28 | Supply of Twisted steel / deformed TMT bars Gr. Fe 500D upto 12mm dia etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Quintal | 2.00 | 5,700.78 | 11,401.56 |
| 29 | Supply of Hydraulic door closer ISI marked (IS:3564-1996) etc of standard make with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 20.00 | 651.52 | 13,030.4 |
| 30 | Supply of Fly proof SS wire mesh grade 304 0.50mm etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Sqm | 200.00 | 290.86 | 58,172 |
| 31 | Supply of U-PVC pipes (working pressure 4 kg/cm2) Single socketed pipe 75mm dia etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Metre | 100.00 | 81.44 | 8,144 |
| 32 | Supply of U-PVC pipes (working pressure 4 kg/cm2) Single socketed pipe 110mm dia etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Metre | 150.00 | 151.25 | 22,687.5 |
| 33 | Supply of Miscellaneous UPVC fittings etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Kg | 5.00 | 232.68 | 1,163.4 |
| 34 | Supply of White plastic W C seat (solid) with lid C.P. brass hinges and rubber buffers etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 20.00 | 477 | 9,540 |
| 35 | Supply of C.I. bracket for wash basin and sinks etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Pair | 25.00 | 102.38 | 2,559.5 |
| 36 | "Supply of Coloured (other than black)solid P.V.C. seat in European W.C. pan etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site." | Each | 10.00 | 407.2 | 4,072 |
| 37 | Supply of Rectangular shape 453x357 mm Mirror with Plastic moulded frame etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 25.00 | 337.39 | 8,434.75 |
| 38 | Supply of Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 150.00 | 29.09 | 4,363.5 |
| 39 | Supply of Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings etc with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 100.00 | 38.39 | 3,839 |
| 40 | "Supply of Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 4mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Sqm | 100.00 | 349.03 | 34,903 |
| 41 | Supply of Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site. | Sqm | 10.00 | 359.5 | 3,595 |
| 42 | Supply of Stone Aggregate (Single size) : 10 mm nominal size with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | cum | 12.00 | 1,761.34 | 21,136.08 |
| 43 | Supply of Stone Aggregate (Single size) : 06 mm nominal size with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | cum | 12.00 | 1,819.51 | 21,834.12 |
| 44 | Supply of Unslaked lime with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Quintal | 1.00 | 406.24 | 406.24 |
| 45 | Supply of Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm) ncluding all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site. | Sqm | 25.00 | 601.49 | 15,037.25 |
| 46 | Supply of GI binding wire with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Kg | 60.00 | 53.52 | 3,211.2 |
| 47 | Supply of Anodised Aluminium tower bolt (barrel type) 150x10 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | 10 Nos. | 100.00 | 353.68 | 3,536.8 |
| 48 | Supply of UPVC plain shoe 75 mm bend of including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site. | Each | 100.00 | 31.41 | 3,141 |
| 49 | Supply of Synthetic enamel paint in all shades litre with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Litre | 25.00 | 191.96 | 4,799 |
| 50 | Supply of Plastic acrylic emulsion paint with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Litre | 50.00 | 232.68 | 11,634 |
| 51 | Supply of Water proofing compound (pH>7, Sp.Gravity 1.06±0.02, conforming to IS:2645) with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Kg | 50.00 | 40.72 | 2,036 |
| 52 | Supply of 15 mm PTMT bib cock with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 200.00 | 75.62 | 15,124 |
| 53 | Supply of 15 mm PTMT bib cock long body with flange with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 200.00 | 116.34 | 23,268 |
| 54 | Supply of 15 mm dia PTMT stop cock with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 100.00 | 69.81 | 6,981 |
| 55 | Supply of PTMT push cock 15 mm dia with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 70.00 | 63.99 | 4,479.3 |
| 56 | Supply of Brass bib-cock 15 mm dia with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 100.00 | 244.32 | 24,432 |
| 57 | Supply of C.P.Brass long body bibcock 15mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 75.00 | 581.71 | 43,628.25 |
| 58 | Supply of Brass stop-cock 15 mm dia with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 100.00 | 244.32 | 24,432 |
| 59 | Supply of C.P. Brass angle valve 15 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 100.00 | 407.2 | 40,720 |
| 60 | Supply of Polyethylene water storage tank with cover and suitable locking arrangements with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Litre | 20000.00 | 7.1 | 1,42,000 |
| 61 | Supply of Unplasticised P.V.C. connection pipe with brass union 45 cm long 15mm bore with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 100.00 | 40.72 | 4,072 |
| 62 | Supply of Stoneware pipes grade A (60 cm long) 150 mm dia with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 100.00 | 145.43 | 14,543 |
| 63 | Supply of UPVC coupler for UPVC drainage pipes 75 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 50.00 | 20.94 | 1,047 |
| 64 | Supply of uPVC coupler for UPVC drainage pipes 110 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 50.00 | 45.37 | 2,268.5 |
| 65 | Supply of UPVC plain shoe 110 mm bend with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 25.00 | 54.68 | 1,367 |
| 66 | Supply of UPVC pipe clip 75 mm bend with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 100.00 | 17.45 | 1,745 |
| 67 | Supply of UPVC pipe clip 110 mm bend with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 50.00 | 16.29 | 814.5 |
| 68 | Supply of Vitreous china pedestal for wash basin with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 25.00 | 1,105.25 | 27,631.25 |
| 69 | Supply of Coloured Orissa pattern W.C. pan 580x440 mm with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 10.00 | 1,861.48 | 18,614.8 |
| 70 | Supply of Coloured Pedestal type W.C. pan 580x440 mm (European type) with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site.. | Each | 5.00 | 988.91 | 4,944.55 |
| 71 | Supply of Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings,accessories and flush pipe) with all contractors transportation, lead & lift, taxes, stacking at desired location etc as per as directed by the Engineer In charge at site. | Each | 45.00 | 668.97 | 30,103.65 |
| 72 | Supply of H.P. or L.P. ball valve with polythene floats: 15 mm dia including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site. | Each | 50.00 | 250.14 | 12,507 |
| 73 | Supply of H.P. or L.P. ball valve with polythene floats: 20 mm dia including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site. | Each | 50.00 | 279.22 | 13,961 |
| 74 | Supply of Aluminium paint including all contractor's labour, lead and lift, taxes etc., and as directed by Engineer in charge at site. | Litre | 75.00 | 174.51 | 13,088.25 |
| 75 | Supply of Portland Cement (OPC-43 grade) including all contractor's labour, lead and lift, taxes and including stacking at desired location as per the directions of Engineer in charge at site. | MT | 5.50 | 5,986.65 | 32,926.58 |
| 76 | Supply of white cement from reputed manufactures including all contractor's labour, lead and lift, taxes and including stacking at desired location as per the directions of Engineer in charge at site. | MT | 0.10 | 13,199.88 | 1,319.99 |
| 77 | Supply of fine sand(Zone IV) including all contractor's labour, lead and lift, taxes and including stacking at desired location as per the directions of Engineer in charge at site. | cum | 55.00 | 1,237.8 | 68,079 |
| 78 | Supply of bleaching powder ncluding all contractor's labour, lead and lift, taxes and including stacking at desired location as per the directions of Engineer in charge at site. | Quintal | 7.00 | 2,140.7 | 14,984.9 |
| 79 | Providing and applying Lime mortar up to 50mm thick in two layers for walls and ceiling by using ek bara lime mortar mixture preparing the fresh lime mortar in heritage pan mixture using lime stone, non-filtered river sand, Jaggery, Gull nut, Jute and other materials. Mixing all these in appropriate proportional ratios including removal of existing damaged surface up to last/hard layer including removal of mortar between stone masonry as per the site condition if necessary, cleaning the surface with all contractor's men, material, tools, lead and lift, consumables and transportation. | Sqm | 200.00 | 3,200.19 | 6,40,038 |
| 80 | Dismantling and Replacing of existing damaged hot pressed moulded thermosetting glass fiber reinforced polyester resin (GRP) water storage Tank or Panels of Sides, Bottom & Top along with all connected fittings/ accessories like a) Bolts & Nuts, b) Sealing tap / Foam gas cut c) Internal and external reinforcement d) Roof support & tie bars e) Internal and external ladders f) Air vent, flange and level indicator g) Man hole & drain panel h) Inlet and Out let / delivery pipes i) Drain / over flow pipe etc. including replacement of sealing tap/ foam gas cut, Bolts & nuts and any damaged accessories but excluding the plumbing items with brand new panels or refixing of existing panels. If necessary, the dismantled tank to be fixed / reassembled at desired location or other site on existing staging with contractor's own transportation and shifting of Panels including all contractor's labour material, tools & plants transportation, lead & lifting, scaffolding if any etc., all taxes complete as per the instructions of Engineer in charge at site. Dismantling and assembling of old panel 1000mmX1000mm | Each | 70.00 | 1,655 | 1,15,850 |
| 81 | Dismantling and Replacing of existing damaged hot pressed moulded thermosetting glass fiber reinforced polyester resin (GRP) water storage Tank or Panels of Sides, Bottom & Top along with all connected fittings/ accessories like a) Bolts & Nuts, b) Sealing tap / Foam gas cut c) Internal and external reinforcement d) Roof support & tie bars e) Internal and external ladders f) Air vent, flange and level indicator g) Man hole & drain panel h) Inlet and Out let / delivery pipes i) Drain / over flow pipe etc. including replacement of sealing tap/ foam gas cut, Bolts & nuts and any damaged accessories but excluding the plumbing items with brand new panels or refixing of existing panels. If necessary, the dismantled tank to be fixed / reassembled at desired location or other site on existing staging with contractor's own transportation and shifting of Panels including all contractor's labour material, tools & plants transportation, lead & lifting, scaffolding if any etc., all taxes complete as per the instructions of Engineer in charge at site. Replacement of panels with brand new panels 1000mmX1000mm | Each | 40.00 | 8,356 | 3,34,240 |
| 82 | Hiring of JCB/Hitachi for levelling and dressing ground/dismantling structures ,Removal of jungle, clearing of earth, lowering high cess etc., along side the track between up and down lines obstructing drainages of rain water, clearing of bushes obstructing visibility at curves and Level Crossings with all lead and lift etc. complete and as directed by the Engineer-in-charge .All labour, tools and plants consumables stores including supply of JCB/Hitachi with crew to be provided by the contractor at his own cost. The contractor shall arrange road permit for vehicle for all the States of operation, as per instructions of engineer in-charge and vehicle shall not be more than three years old. Payment shall be made for actual working hours at site. | Hour | 45.00 | 1,032.5 | 46,462.5 |
| Schedule total | ₹67,52,753.06 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecialConditionsforKCGandWW_SCSignedCopy_rotated.pdf
ATTACHMENT
concretemixdesignsystemimprovements.pdf
ATTACHMENT
SpecialConditionsforPaymentofSteel_1.pdf
ATTACHMENT
Tenderdocument24.09.2024_1.pdf
ATTACHMENT
ContractorseMBrecord.pdf
ATTACHMENT
GCC2022_compressed.pdf
ATTACHMENT
26.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf Approved brand
ATTACHMENT
LaboratorySplconditionslatest.pdf
ATTACHMENT
26.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .