Karnataka

Active

Works

Buildings

PACKAGE NO 1 1.CONSTRUCTION OF OF KANAKADASAR SAMUDAYA BHAVAN AT JADRAMAKUNTI VILLAGE OF BAGALKOTE TALUK 2.CONSTRUCTION OF SANGOLLI RAYANNA SAMUDAYA BHAVAN AT SUTUGUNDAR IN BAGALKOTE TQ AND DISTRICT

Rural Development and Panchayat Raj Department

RDPR Division Office Bagalakote | Bagalkot, Karnataka

Amount: ₹25.2 LCloses: 11 Sept 2026Due tomorrow

Timeline

Published4 Sept 2026
Closes11 Sept 2026

Tender Value

₹25.2 L

EMD Value

₹31,492

Closing Date

11 Sept 2026, 5:30 pmDue tomorrow

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

EE PRED BAGALKOTE

Office Number

Mobile Number

Work Description

PACKAGE NO 1 1.CONSTRUCTION OF OF KANAKADASAR SAMUDAYA BHAVAN AT JADRAMAKUNTI VILLAGE OF BAGALKOTE TALUK 2.CONSTRUCTION OF SANGOLLI RAYANNA SAMUDAYA BHAVAN AT SUTUGUNDAR IN BAGALKOTE TQ AND DISTRICT

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT27103/CALL-2

Reference Number

RDPR/2026-27/BD/WORK_INDENT27103/CALL-2

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Bagalakote

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredPRED/KPWD CLASS-III AND ABOVE Registration Certificate

RequiredReserved FOR CAT-1 CATEGORY CONTRACTOR Cast certificate should apply

RequiredTo qualify for award of this contact each tenderer in his name should have in the 2021-22 to 2025-26 years period achieved in at least two financial years an average financial turnover of Rs.25.19 Lakhs usually not less than amount put to tender from C.A. on Letter Head with UDIN No. otherwise bid will be directly disqualified

RequiredThe Tenderer shall obtain Any Nature of Work done certificate will be Considered financial years of 2021-22 to 2025-26 25PERECENT of the Amount Put to Tender i.e Rs 6.30 lakhs in the prescribed format from the Competent Authority not below the rank of Executive Engineer District Level Officer and scan the Original Certificate and attach the scanned file to the Bid.

RequiredName and Address of Contractor for Communication

RequiredTenderer must Submit PAN & GST Certificate.

RequiredAssessed available tender capacity equal to AxNx5 - B

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of kppp-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

For Details Refer Tender Notification And Conditions In The Bid Documents.

All materials should be in good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same.

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the original documents before approval.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

If any date in the tender time table is government holiday, next working date will be considered

Incomplete / conditional tenders will not be accepted.

Executive Engineer PRED Bagalkote has authority to accept or reject any tender without assigning reason

Tenderer must submit his present accurate postal address and phone / cell phone number

The tender may be cancelled at any stage without assigning any reason

Tenderers must have valid PRED/PWD registration and must submit PRED/PWD registration copy

Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward.

For interpretations of clauses, conditions, spelling mistakes, etc. decision of Executive Engineer, PRED, BAGALKOTE is final.

Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Bagalkote within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008.

As per Government order No. FD 56 PWD cell 2004, Bngalore, 18th Janury 2005, The contractor shall be made responsible for submiting e-bills duly suported the hard copy of detailed measurements of work. using electrinic spreadsheets and making computation thereof. The conctractor shall submit diskette/ CD room in addition the hard copy

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form and which are should not be corrupted files. If it shows errors while opening the documents the employer is not responsible. Hence the such files will be considerd as un submitted.

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22 2022-23, 2023-24 & 2024-25 2025-26achieved in One financial year should be more than financial turnover of Amount put Tender Amount (in all classes of civil engineering construction works only)

Tenderer must submit copies of documents according to KW-1&2 document

The Tenderer shall obtain Any Nature of Work done certificate will be Considered financial years of 2021-22 to 2025-26 (25% of the Amount Put to Tender) i.e in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid.

THIS WORK IS RANDOMISED AS CAT-1 CATEGORY OF WORK. HENCE ONLY CAT-1 CATEGORY OF CONTRACTOR SHOULD BID OTHER BIDDERS MAY BE CONSIDERED AS FRAUDULANT PRACTICES.

Single Tender Will Not Be Accepted

The Project Completion period is 4 Months and the defect liability period of the work is (2) TWO year after successful completion of the work. (including Monsoon).

Work Completion/Execution Period 4 Months

This work is Randomized under LOT12884 Sl No 11,10 and which is classified as :CAT 1Category work. Hence this work is purely reserved for CAT 1 Category Bidders only.

For this work only eligible CAT-1 Contractor (with cast certificate) should apply

Videography and photographs in three stages should be taken and submitted along with the bill before starting, during execution and after completion of work in the presence of the section officer

All materials including complete with all lead and lift and as per the direction of Engineer in charge of work

All materials shall be of good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

After Completion of Work Third Party/SQM/DQM Inspection Reports Submitt with the Bills

Govt Order. No.FD 707 EXP-12/2024 BANGALORE DATE:05.11.2024

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

Fee & Financial Details

Tender Fee Amount

₹630

EMD Fee Amount

₹31,492

Important Dates

Last Activity

4 Sept 2026

Published

4 Sept 2026

Download Ends

10 Sept 2026

BOQ Preview

•

CONSTRUCTION OF OF KANAKADASAR SAMUDAYA BHAVAN AT JADRAMAKUNTI VILLAGE OF BAGALKOTE TALUK

•

Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not excee...

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels , key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-cha...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m eight. The granite/trap...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Centering and shuttering for RCC Beams, Lintels of Buildings according to the Table For Finished rate of Concrete For slab50%

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

CONSTRUCTION OF SANGOLLI RAYANNA SAMUDAYA BHAVAN AT SUTUGUNDAR

•

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.

•

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of En...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Cement Concrete for all Foundation works.

•

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Additionalities for Formwork, Centering & Scaffolding Footing 8%

•

Additionalities for Formwork, Centering & Scaffolding Col-70%

•

Additionalities for Formwork, Centering & Scaffolding Plinth Beam,Lintel,Slab beam-60%

•

Additionalities for Formwork, Centering & Scaffolding Slab-50%

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1cement : 6 coarse sand) including cost of all materials, labour,...

•

Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm dia mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concre...

•

Supplying heavy gauge PVC Conduit Pipe ….dia .....mm thick with suitable size bends, metal junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and cem...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood. After due groove cutting, necessary masonary patch work complete.10''x7''x3 (254x178x76mm)

•

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulat...

•

Wiring for lighting/power circuit using one of PVC insulated 1100V grade, multis and Copper conductor single core cable in open or consealed system of wiring. Using Class 'A' approved materials.1 sqm...

•

Supply 6A flush/projected type socket and a 6 amps flush/ projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush monted w...

•

Supplying and fixing of modular switch & connected

•

accessories on existing modular switch plate as per IS 3854 and IS 1293.32 Amps DP switch

•

Supplying and fixing of modular switch & connected

•

accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16Amps Univerals socket

•

Supplying and fixing of modular switch & connected

•

accessories on existing modular switch plate as per IS 3854 and IS 1293.Electronic stepped regulator

•

Supplying and fixing hylum plastic sheet 3 mm thick with necessary nitches for fixing switches,regulators etc. and fixing on existing wood or metal box using N.F. screws.

•

Supply of round/square recess/surface mounted rolling

•

type LED Down light with .......W GU 10 LED Lamp Rib

•

Fabricated from Die cast aluminium with white powder

•

coated prewired to mains connector & has...

•

Supplying and fixing polished wood board made of not lees then 15mm thick plank on both side with planks made out of more then 2 pieces and fixing the same to the wall using taperd inverted wooden flu...

•

Supplying & fixing of porcelain fuse channel with cut on existing wooden /panel using necessary nuts, bolts and washers etc, complete.32 Amps

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

•

Supplying, fixing & wiring, earth electrode for ground conduits. I.C. cutouts and other equipements, on the meter board using 40mm dia 2.90 thick of GI pipe 2.5 mtr long burid in a pit. The pit sholud...

•

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of R...

•

Supplying and Fixing of........mm dia class A GI pipe bracket up to 2 mtrs long bent at suitable angle and fixing to this bracket 1x40/2x40 watts fluorescent tube street light fitting of all capacitie...

•

Fixing all types and all capacities fluorescent/ false ceiling/spot light/ CFL fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076'' twin PVC insulated wires, required nos of round blo...

•

Supplying & Fixing of 230 V 20/40 W Fluorescent Lamp holder

•

Supplying of .....feet -PVC Batten with integrated LED tube 20W with high quality diffuser with Life of 25000 burnin hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power ...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopiesetc, for operation on 230V, 50cycles. Single phase Acs upply conforming to ISS-374-1979 and with double ball bearin...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP-kw-2 27103 CAT 1.doc

Tender Document • 2.56 MB

KPPP-kw-2 27103 CAT 1-2.doc

Tender Document • 2.56 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .