Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹26.7 L
EMD Value
₹26,687
Closing Date
10 Jun 2025, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Bangalore Electricity Supply Company Limited
SEEO
Segregation of agriculture load on existing 11KV Mixed/NJY/Industrial/Rural/Town feeder from F18Urdigere cross feeder to F1Chikkapalanahalli and F3 Yelerampura Agri feeder under TOTAL TURNKEY on PERCENTAGE QUOTING BASIS in Koratagere Sub division in Madhugiri division
BESCOM/2024-25/EL/WORK_INDENT344/CALL-2
BESCOM/2024-25/EL/WORK_INDENT344/CALL-2
Reserved
Electrical
Two Tender Document System(Two Cover)
BESCOM Chitradurga Area Zone(CTAZ) Office Bengaluru
4 documents required · 0 mandatory · 4 optional
The bidder should have Satisfactorily completed, as Prime Contractor, at least any construction of electrical 11kV Distribution work, extension of 11 KV lines, 11 KV link lines, DTCs works, extension of LT lines to any ESCOMs, Govt. utilities, PSUs of value not less than 25 percent of the amount put to tender in any of Five FY 2019 20, 2020 21, 202122, 2022 23 & 2023 24 as on the date of Bid Submission. Note Updated to the FY in which the tenders are invited. The value of the completed works shall be given a weight of 10 percent per year to bring them to the price level of the FY in which the tenders are invited. FY 2024 25 NOTE The work executed under sub contractor, sublet, self execution will not be considered. However experience in only LT lines will not be considered. Scanned copy of the Work Awards and Satisfactory Work completion certificate duly mentioning the Detailed scope of the work, Voltage Class, Work Awards No & Date, Contract value of Work Awards Rs.in Lakhs, Actual date of completion and Actual expenditure Material supply cost & erection cost by the agency of project after completion Rs.in Lakhs, issued by an officer not below the rank of Executive Engineer or equivalent Officer of the concerned ESCOMs, Govt. utilities, PSUs
The bidder should have achieved in at least one financial year during the Five FY 2019 20, 2020 21, 2021 22, 2022 23 & 2023 24, minimum financial turnover equivalent to the amount put to tender. Note Updated to the FY in which the tenders are invited. Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited. Scanned Copies of the Annual Accounts statements such as P&L statement and Balance sheets for the Financial Years 2019 20 to FY 2023 24 duly signed by the Registered Charted Accountant shall be uploaded, PIN must be mentioned. For the certificates UDIN is mandatory.
Liquid assets as on 30.04.2025 or at a later date before submission of the bid consisting of Cash at Bank and Term Deposits and availability of fund based credit facility in any Nationalized/scheduled Commercial Bank shall not be less than 30 percent of the amount put to tender. The cash at Bank, Bank Deposits and availability of fund based credit facilities shall be supported by a certificate issued by Nationalized/ Scheduled Bank shall be uploaded. If the Bidder has banking with more than one Bank, then the available balance liquid assets mentioned above on a particular date & particular time i.e., as on 30.04.2025 or at a later date before submission of the bid shall be the same date & time for all the banks. In case of Fund Based credit facility, the certificate issued by Nationalized/ Scheduled Bank duly mentioning sanctioned limits, funds utilized so far and balance available as on 30.04.2025 or at a later date before submission of the bid
The bidder shall be a registered sole proprietorship firm or a partnership firm or a Registered company incorporated under companies Act 1956/2013.Scanned copy of Certificate of Incorporation in case of Registered Company/ Partnership Deed in case of Partnership Firm/GST or PAN Registration in case Proprietorship
The bidder shall possess a valid Class I/Super grade Electrical Contractors License issued by Electrical Inspectorate, Government of Karnataka as on the date of Bid Submission. Scanned copy of valid Class I/Super grade Electrical Contractors License issued by Electrical Inspectorate, Government of Karnataka
The bidder shall possess the following registration certificate in the name of the bidder ESI registration certificate EPF registration Certificate PAN card GST registration certificate Income and Cast certificate of Category IIA issued by. Original scanned copies of valid ESI, EPF, PAN, GST, Income and Cast certificate of Category IIA & Form C registration certificates in the name of bidder. concerned authority and Form C issued by department of Labour
The Bidders can be disqualified if the Bidder is Black Listed by any Public Electrical Utility/Govt. utility as on the date of bid submission, Defaulted/short closed due to non performance in execution of works against the order placed any Public Electrical Utility/Govt. Utility, Bidder has made misleading or false representations in the forms, statements and attachments. Bidder has record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc. Bidder has participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification. Litigation History The Bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the preceding five years, A consistent history of awards involving litigation against the Bidder or any partner of Joint Venture may result in rejection of Bid. Self declaration in the prescribed format as per Annexure I on notarized Rs.500.00 stamp paper. The self declaration shall clearly indicate the tender enquiry number & date on which declaration is done
Any Bidder from a country which shares a land with India will be eligible to bid in this tender only if the Bidder is registered with the Competent Authority of India. (as per the Govt. order No. FD 455 Exp 12/2020 dated 25.08.2020). Registration certificate issued by the competent authority
A certificate for having read the clauses is required to be submitted/uploaded by the tenderer separately in Annexure V as below I have read the clause regarding restrictions on procurement from a Bidder of a country which shares a land border with India I certify that this Bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this Bidder fulfils all requirements in this regard and is eligible to be considered. Where applicable, evidence of valid registration by the Competent Authority shall be attached as per the Govt. order No.FD 455 Exp 12/2020 dated:25.08.2020. Self declaration in the prescribed format as per Annexure II on notarized Rs.500.00 stamp paper. The self declaration shall clearly indicate the tender enquiry number & date on which declaration is done
If the bidder participates for more than One enquiry, then the bidder shall fulfil the TECHNICAL criteria individually & FINANCIAL criteria cumulatively. Note If this condition is not met, then the offer of the bidder will be considered to the enquiries in the descending order of contract value starting with the highest Amount put to tender for which the bidder is eligible
Bidders who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity is equal to ( AxNx5 minus B ) Where, A is equal to Maximum value of works executed in any one year during the FY FY 2019 20, 2020 21, 2021 22, 2022 23 & 2023 24 (updated to FY 2023 24 price level) taking into account the completed as well as works in progress. N is equal to Number of years prescribed for completion of the works for which tenders are invited i.e., Six months. B is equal to Value, at FY 2023 24 price level, of existing commitments and ongoing works to be completed during the next Six months. The statements showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed as per the format prescribed in the Techno Commercial sheet. The statement should be certified by the Employer in charge, not below the rank of an Executive Engineer or equivalent. The bidder shall note that the value of pendency of work should be considered based on financial progress achieved in the particular work as on the date of bid submission. Assessed available tender capacity should be uploaded as per TECHNOCOMMERCIAL SHEETS VOLUME III Section X SCHEDULE 3 (4 of 5)
₹670
₹26,687
19 May 2025
19 May 2025
12 Jun 2025
31 May 2025
27 May 2025
Segregation of agriculture load on existing 11KV Mixed/NJY/Industrial/Rural/Town feeder from F18Urdigere cross feeder to F1Chikkapalanahalli and F3 Yelerampura Agri feeder under TOTAL TURNKEY on PERCENTAGE QUOTING BASIS in Koratagere Sub division in Madhugiri division
Supply of PSCC pole 9 mtr long 300 kg W/L (for dead end and anchor points only)
Supply of PSCC pole 9 mtr long 200kg W/L (for intermediate only)
Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for PSCC Pole 9 Mtr Long, 200 Kg WL GI
Supply of 45KN Composite polymer insulators.
Supply of 11kV Composite Polymer pins insulators.( 24mm dia FRP rod)
Supply of Guy Set Complete with No. 15 Strain Insulator & Concreting materials GI
Supply & stringing of ACSR Rabbit conductor with 1.5% sag as per BESCOM Specification
Supply of Spiral Earth Electrode
Supply of DP set (2 pole structure kit GI) with 9 mtr PSCC, 300 KG W/L including 5Kg , 8SWG GI wire for structure grounding.
Supply of 11kV class 200 AMPS Single Break GOS
Supply of H Frame Set for 11kV, 200Amps Single Break GOS Mounting GI
Supply of 11kV Spl 3pin X arms, pole clamps, bolts for PSCC pole GI
Supply of 11kV Class DOLO Cutouts
Supply of Guardings Materials for road crossing(span 40 mtr)
Supply of caution/Danger board as per drawing no.BESCOM/GM/CP/40/24.10.17
Supply & Fixing of Anticlimbing Device GI Barbed Wire (12 mtrs/1kg)Lumpsum
Supply of Double Pole Mounted Transformer kit for 63 kVA with 2 Nos of 9 mtr long PSCC Pole, 300KG W/L GI
Supply of 11kV/433V, 63 kVA,3phase 50cys Distribution Transformer BEE 4star rated
Supply of Earthing materials pipe type for grounding as per Drawing No BESCOM/GM/CP/15&34 dt:24.10.17(Single Electrode with accessories)
Supply of GI wire 8SWG
Supply & providing of Guy wire 7/10SWG
Supply of LT Protection kit
Supply of Al Lead Wire 95 Sqmm
Supply of Heavy Duty Long Barrel Copper Lug 95 Sqmm
Supply of PG Clamp Rabbit to 95 Sqmm
Supply of Spacer for DTC Wiring
Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised)
Supply of LT Metering box with CTs and necessary wiring for housing ETV Meter (Please see CDS 39)
Supply of H.G.Fuse unit,11kV solid core Type(Set 3no)
supply & providing Transparent Alkathine tube 19mm dia, 2mm thick in coils of 30 mtrs
1.1kV Class 3 Phase Aerial Bunched Cable of size 3x95+1x16+1x70 Sq. mm
PSCC Pole 8 Mtr Long, 200 Kg WL (for Intermediate Pole)
Three Phase Distribution box for 6 Connections
Piercing connector suitable for 16 Sq. mm 95 Sq. mm AB Cable Service Connections
Piercing connector suitable for 16 Sq. mm 95 Sq. mm AB Cable Street Light Connections
Suspension Clamp Assembly 16 to 70 mm ( Excluding pole clamp & Eye Hook )
Pole clamp for HT/LT AB cable
Eye Hook (Flat type) for fixing Clamps
Dead End Clamp/Anchor Clamp Assembly 25 to 95 Sq mm (excluding pole clamps and Eye hook)
Universal Hook, Bolts & nuts
Pre Insulated lugs CPTAU for 95 Sqmm
End cap for 50/70 Sqmm
Supply of Guy Set Complete with No 8. Strain Insulator & Concreting materials GI
PVC Insulated wire 16/25 Sqmm
Erection of PSCC pole 9 mtr long 300 kg W/L (for dead end and anchor points only)
Erection of PSCC pole 9 mtr long 200kg W/L (for intermediate only)
Erection of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for PSCC Pole 9 Mtr Long, 200 Kg WL GI
Erection of Guy Set Complete with No. 15 Strain Insulator & Concreting materials GI
Supply & stringing of ACSR Rabbit conductor with 1.5% sag as per BESCOM Specification
Erection of Spiral Earth Electrode
Erection of DP set (2 pole structure kit GI) with 9 mtr PSCC, 300 KG W/L including 5Kg , 8SWG GI wire for structure grounding.
Erection of 11kV class 200 AMPS Single Break GOS
Erection of H Frame Set for 11kV, 200Amps Single Break GOS Mounting GI
Erection of 11kV Spl 3pin X arms, pole clamps, bolts for PSCC pole GI
Erection of 11kV Class DOLO Cutouts
Erection of Guardings Materials for road crossing(span 40 mtr)
Erection of caution/Danger board as per drawing no.BESCOM/GM/CP/40/24.10.17
Supply & Fixing of Anticlimbing Device
GI Barbed Wire (12 mtrs/1kg)Lumpsum
Erection of Double Pole Mounted Transformer kit for 63 kVA with 2 Nos of 9 mtr long PSCC Pole, 300KG W/L GI
Erection of 11kV/433V, 63 kVA,3phase 50cys Distribution Transformer BEE 4star rated
Erection of Earthing materials pipe type for grounding as per Drawing No BESCOM/GM/CP/15&34 dt:24.10.17(Single Electrode with accessories)
Erection of LT Protection kit
Erection of LT wiring (from 63 KVA DTC to LT line) Al Lead Wire 95 Sqmm, Heavy Duty Long Barrel Copper Lug 95 Sqmm, PG Clamp Rabbit to 95 Sqmm, Spacer for DTC Wiring & Fish Plate with necessary Clamps...
Erection of LT Metering box with CTs and necessary wiring for housing ETV Meter (Please see CDS 39)
Erection of H.G.Fuse unit,11kV solid core Type(Set 3no)
Erection of 1.1kV Class 3 Phase Aerial Bunched Cable of size 3x95+1x16+1x70 Sq. mm
Erection of PSCC Pole 8 Mtr Long, 200 Kg WL (for Intermediate Pole)
Fixing of Three Phase Distribution box for 6 Connections
Fixing of Piercing connector suitable for 16 Sq. mm 95 Sq. mm AB Cable Service Connections
Fixing of Piercing connector suitable for 16 Sq. mm 95 Sq. mm AB Cable Street Light Connections
Fixing of Suspension Clamp Assembly 16 to 70 mm ( Excluding pole clamp & Eye Hook )
Fixing of Pole clamp for HT/LT AB cable
Fixing of Dead End Clamp/Anchor Clamp Assembly 25 to 95 Sq mm (excluding pole clamps and Eye hook)
Fixing of Universal Hook, Bolts & nuts
Fixing of Pre Insulated lugs CPTAU for 95 Sqmm
Fixing of End cap for 50/70 Sqmm
Fixing of Erection of Guy Set Complete with No 8. Strain Insulator & Concreting materials GI
Guy Concreting with Mud, Boulders & Sand
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
10 TECHNOCOMMERCIAL SHEETS VOLUME-III Section-X.xls
Techno-Commercial Worksheet • 0.22 MB
5 B. SCC VOLUME-I Section-V.docx
Others - SCC • 0.06 MB
8 DRAWINGS VOLUME-II Section-VIII.docx
Others - DRAWINGS • 0.03 MB
5 C. GCC VOLUME-I Section-V.docx
Others - GCC • 0.08 MB
5 A. CONDITION OF CONTRACT VOLUME-I Section-V.docx
Others - CONDITION OF CONTRACT • 0.06 MB
2 ITT VOLUME-I Section -II.docx
Instructions to Tenderers • 0.07 MB
3 CONTRACT DATA VOLUME - I Section -III.docx
Others - CONTRACT DATA VOLUM • 0.06 MB
9 BILL OF QUANTITY VOLUME-II Section-IX.docx
Others - BOQ • 0.04 MB
6 QUALIFICATION INFORMATION VOLUME-I Section-VI..docx
Others - 6 QUALIFICATION INFORMATION VOLUME- • 0.03 MB
4 ANNEXURES VOLUME-I Section-IV.docx
Others - ANNEXURES • 0.06 MB
1 IFT VOLUME-I Section-I.docx
Tender Document • 0.04 MB
5 D. ECC VOLUME-I Section-V.docx
Others - ECC • 0.05 MB
7 SPECIFICATION VOLUME-II Sectioon-VII.docx
Others - SPECIFICATION • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .