Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹35.5 LAccepted-AOC SIMBAL CAMP WARD NO 5 NEAR GURUDWARA SAHIB R S PURA DISTT JAMMU J K 1812104 | R S PURA | JAMMU | J K | 1812104 | ₹35.5 L | L-1 | Accepted-AOC Being lowest bidder |
| 2 | L-2₹36.3 L+₹75,779.59 (2.13%)Rejected-Finance 223 02 WARD NO 10 A DHURI DISTT SANGRUR | DHURI | SANGRUR | PUNJAB | ₹36.3 L+₹75,779.59 (2.13%) | L-2 | Rejected-Finance Other than lowest bidder |
| 3 | L-3₹38.0 L+₹2.5 L (6.97%)Rejected-Finance | ₹38.0 L+₹2.5 L (6.97%) | L-3 | Rejected-Finance Other than lowest bidder |
| 4 | L-4₹38.1 L+₹2.5 L (7.07%)Rejected-Finance | ₹38.1 L+₹2.5 L (7.07%) | L-4 | Rejected-Finance Other than lowest bidder |
| 5 | L-5₹39.7 L+₹4.2 L (11.7%)Rejected-Finance 201 GANAPATI SANKUL AGASHIVNAGAR MALKAPUR KARAD SATARA MAHARASHTRA 415539 | SATARA | MAHARASHTRA | 415539 | ₹39.7 L+₹4.2 L (11.7%) | L-5 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | M/S JIWAN SINGH L4 | M/s Koul & Sons L6 | Prakash Trading Corporation L5 | TRINETAR RC ENTERPRISES L3 | SHARMA CONSTRUCTION COMPANY L2 | M/s Sahib Construction and engineers L1 | kerni electricals L7 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Material and labour in replacement of LT panel box size (1.2 x 1.2 x 0.6 mtr) having outer shell thickness of 3.15mm and inner shell made out of 2mm thick mild steel sheet and mild steel angle section 50 x 50 x 6 mm mounted on PCC (1:2:4) type B-1 platform 60 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/ openable, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/ vermin proof and general construction confirming to IS:8623/93 complete all as specified and as directed.
Incoming: - (a) MCCB, 400 Amps, 4 Pole, 415V, 35 KA - 01 Each, Al busbar of capacity 630 Amps - Set of three.
Outgoing: - (a) MCCB, 200 Amps, 4 Pole, 415V, 25 KA - 02 Each, (b) MCCB, 100 Amps, 4 Pole, 415V, 10 KA- 01 Each.
(a) Digital Ammeter 0-400 A of size 96 Sqmm with selector switch - 01 No.
(b) Digital Volt meter 0-500 V of size 96 Sqmm with selector switch - 01 No.
(c) Indicator Lamp RYB 22.5mm dia LED type 240 volts AC with incoming including back up protection by 2 Amp MCB RYB with holder - 01 set of three.
(d) CT Coils of suitable ratio - 01 Set. | 4 | Each Job | 96,000 ₹3,84,000 | 1,20,000 ₹4,80,000 | 62,000 ₹2,48,000 | 68,500 ₹2,74,000 | 81,000 ₹3,24,000 | 58,000 ₹2,32,000 Lowest | 1,35,000 ₹5,40,000 |
| 2.00 | Material and labour in replacement of LT feeder piller box size (1.2 x 1.2 x 0.6 mtr) having outer shell thickness of 3.15mm and inner shell made out of 2mm thick mild steel sheet and mild steel angle section 50 x 50 x 6 mm mounted on PCC (1:2:4) type B-1 platform 60 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/ openable, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/ vermin proof and general construction confirming to IS:8623/93 complete all as specified and as directed.
Incoming: - (a) MCCB, 315 Amps, 4 Pole, 415V, 35 KA - 01 Each, Al busbar of capacity 400 Amps - Set of three.
Outgoing: - (a) MCCB, 100 Amps, 4 Pole, 415V, 25 KA - 03 Each, (b) MCCB, 63 Amps, 4 Pole, 415V, 10 KA - 01 Each.
(a) Digital Ammeter 0-400 A of size 96 Sqmm with selector switch - 01 No.
(b) Digital Volt meter 0-500 V of size 96 Sqmm with selector switch - 01 No.
(c) Indicator Lamp RYB 22.5mm dia LED type 240 volts AC with incoming including back up protection by 2 Amp MCB RYB with holder - 01 set of three.
(d) CT Coils of suitable ratio - 01 Set. | 4 | Each Job | 91,000 ₹3,64,000 | 1,10,000 ₹4,40,000 | 62,000 ₹2,48,000 | 57,200 ₹2,28,800 | 72,000 ₹2,88,000 | 55,000 ₹2,20,000 Lowest | 1,38,000 ₹5,52,000 |
| 3.00 | Material and labour in replacement of LT feeder piller box size (1.2 x 1.2 x 0.6 mtr) having outer shell thickness of 3.15mm and inner shell made out of 2mm thick mild steel sheet and mild steel angle section 50 x 50 x 6 mm mounted on PCC (1:2:4) type B-1 platform 60 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/ openable, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/ vermin proof and general construction confirming to IS:8623/93 complete all as specified and as directed.
Incoming: - (a) MCCB, 400 Amps, 4 Pole, 415V, 35 KA - 01 Each, Al busbar of capacity 630 Amps - Set of three.
Outgoing: - (a) MCCB, 200 Amps, 4 Pole, 415V, 25 KA - 01 Each, (b) MCCB, 160 Amps, 4 Pole, 415V, 10 KA - 02 Each, (b) MCCB, 100 Amps, 4 Pole, 10 KA - 01 No.
(a) Digital Ammeter 0-400 A of size 96 Sqmm with selector switch - 01 No.
(b) Digital Volt meter 0-500 V of size 96 Sqmm with selector switch - 01 No.
(c) Indicator Lamp RYB 22.5mm dia LED type 240 volts AC with incoming including back up protection by 2 Amp MCB RYB with holder - 01 set of three.
(d) CT coils of suitable ratio - 01 Set. | 5 | Each Job | 90,000 ₹4,50,000 | 1,25,000 ₹6,25,000 | 62,000 ₹3,10,000 | 79,200 ₹3,96,000 | 72,000 ₹3,60,000 | 58,000 ₹2,90,000 Lowest | 1,25,000 ₹6,25,000 |
| 4.00 | Material and labour in replacement of LT feeder piller/ Junction box size (1.2 x 1.2 x 0.6 mtr) having outer shell thickness of 3.15mm and inner shell made out of 2mm thick mild steel sheet and mild steel angle section 50x50x6 mm mounted on PCC (1:2:4) type B-1 platform 60 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/ openable, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/ vermin proof and general construction confirming to IS:8623/93 complete all as specified and as directed.
Incoming: - (a) MCCB, 250 Amps, 4 Pole, 415V, 35 KA - 01 Each, Al busbar of capacity 315 Amps - Set of three.
Outgoing: - (a) MCCB, 160 Amps, 4 Pole, 415V, 10 KA - 01 Each, (b) MCCB, 100 Amps, 4 Pole, 10 KA - 02 No.
(a) Digital Ammeter 0-400 A of size 96 Sqmm with selector switch - 01 No.
(b) Digital Volt meter 0-500 V of size 96 Sqmm with selector switch - 01 No.
(c) Indicator Lamp RYB 22.5mm dia LED type 240 volts AC with incoming including back up protection by 2 Amp MCB RYB with holder - 01 set of three.
(d) CT Coils of suitable ratio - 01 Set. | 4 | Each Job | 80,000 ₹3,20,000 | 1,00,000 ₹4,00,000 | 58,000 ₹2,32,000 | 48,200 ₹1,92,800 Lowest | 63,000 ₹2,52,000 | 55,000 ₹2,20,000 | 1,15,000 ₹4,60,000 |
| 5.00 | Dismantling and taking down unserviceable earthing and Material and labour for earthing complete with galvanized steel earth electrode plate of size 60x60x6mm thick burried directly in ground/earth pit not less than 2.25 mtr deep below normal ground level and top edge of earth electrode not less than 1.5 mtr below normal ground level and connected with GI earth strip of size 25x4mm by means of nut, bolts, washers etc to equipment/ machinery all as shown in electric plate No 3 of SSR Pt - I including PCC (1:3:6) pit, pit cover 50mm thick RCC (1:2:4) type B-1 using 8mm for steel bars @10cm centre to centre both ways, 40mm bore medium grade GI protection pipe, watering pipe 20mm bore medium grade, funnel, wire mesh, also including earth work, common salt, charcoal dust complete all as specified and as directed by Engineer-in-Charge. | 32 | Each | 2,000 ₹64,000 | 3,200 ₹1,02,400 | 1,900 ₹60,800 Lowest | 2,850 ₹91,200 | 3,600 ₹1,15,200 | 2,500 ₹80,000 | 3,100 ₹99,200 |
| 6.00 | Supply and fixing in replacement MCCB TPN 400 Amps, 415 Volts, 50 KA, 4 pole, Ics=100% Icu, overload adjustable short circuit adjustable type including complete connection all as specified and all as per directions of Engineer-in-Charge. | 4 | Each | 15,000 ₹60,000 | 7,200 ₹28,800 Lowest | 14,000 ₹56,000 | 7,500 ₹30,000 | 9,000 ₹36,000 | 12,000 ₹48,000 | 16,500 ₹66,000 |
| 7.00 | Supply and fixing in replacement MCCB TPN 250 Amps, 415 Volts, 25 KA, 4 pole, Ics=100% Icu, overload adjustable short circuit adjustable type including complete connection all as specified and all as per directions of Engineer-in-Charge. | 4 | Each | 4,200 ₹16,800 Lowest | 6,800 ₹27,200 | 9,500 ₹38,000 | 6,800 ₹27,200 | 7,500 ₹30,000 | 10,000 ₹40,000 | 10,000 ₹40,000 |
| 8.00 | Supply and fixing in replacement MCCB TPN 200 Amps, 415 Volts, 25 KA, 4 pole, Ics=100% Icu, overload adjustable short circuit fixed type including complete connection all as specified and all as per directions of Engineer-in-Charge. | 4 | Each | 4,000 ₹16,000 Lowest | 5,400 ₹21,600 | 7,500 ₹30,000 | 4,500 ₹18,000 | 6,000 ₹24,000 | 6,500 ₹26,000 | 8,800 ₹35,200 |
| 9.00 | Supply and fixing in replacement MCCB TPN 160 Amps, 415 Volts, 25 KA, 4 pole, Ics=100% Icu, overload adjustable short circuit fixed type including complete connection all as specified and all as per directions of Engineer-in-Charge. | 4 | Each | 3,800 ₹15,200 Lowest | 4,800 ₹19,200 | 5,500 ₹22,000 | 4,000 ₹16,000 | 4,500 ₹18,000 | 6,000 ₹24,000 | 6,500 ₹26,000 |
| 10.00 | Supply and fixing in replacement MCCB TPN 100 Amps, 415 Volts, 16/18 KA, 4 pole, Ics=100% Icu, overload adjustable short circuit fixed type including complete connection all as specified and all as per directions of Engineer-in-Charge. | 4 | Each | 3,000 ₹12,000 | 3,200 ₹12,800 | 4,600 ₹18,400 | 2,250 ₹9,000 Lowest | 3,000 ₹12,000 | 3,000 ₹12,000 | 3,000 ₹12,000 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
23 Jul 2025, 6:00 pmClosed
GE Jammu
GE Jammu c/o 56 APO Pin-900277
MAINT OF LT PANEL/ FEEDER PILLER BOXES/ JUNCTION BOXES AND UG CABLE AT DAMANA UNDER GE JAMMU
2025_MES_716642_1
GEJC-45/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
AOR of GE Jammu
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
GE Jammu
₹1 L
Yes
29 Oct 2025
25 Jun 2025
25 Jul 2025
25 Jun 2025
23 Jul 2025
9 Jul 2025
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .