COMPREHENSIVE MAINT TO EM AND BR SERVICES TO OFFICES MI ROOM ADM BLOCK DRONA COMPLEX ETC IN INS TUNIR AREA AT NAVAL STATION KARANJA

Amount

Notes : - (i) The is at Serial No.47 of TPP 2025-26 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. (iv)The Unit Rate quoted are deemed to include for the following and nothing extra will be paid for these works: (a). Supplying, erecting and use of scaffolding upto required height (max 25 to 30m) or upto 8th floor height with necessary H-frames, pipes, couplers, buckles, bracing, top platform with support railing at top etc. at all levels of building including carriage of the materials to the location, erecting, fixing the scaffolding and dismembering the same after working and taking away the scaffolding materials etc. complete as per direction of Engineer-in-charge. (b). Supplying, erecting & use of temporary bamboo scaffolding around the building as required. The scaffolding is to be secured properly in position by bracings, ties clamps, etc. complete including providing and erecting working platform at all heights as required, including removal after completion of work all as per direction of Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S&F Steel works in tubular trusses including special shaped washer etc using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed.

M&L for framed work such as grills, gratings, post of angle iron etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall. Contractor shall make his own arrangement for welding with boundary wall by using gen sets or any alternative arrangement.

S&F premoulded cast iron gate of Fe-150 confirming to IS ornamental type in cast iron & mild steel of 6.20m span, 3.0m to 4.065m in height two leaves and wicket gate in cast iron & mild steel of 1.5m span, 2.1m height in single leaf, including necessary welding, pintol hinges, steel ball bearing plates and locking arragement complete all as specified and directed. Note:- (a) Frame of cast iron gate shall be of mild steel pipe frame of size 50mm X 50mm x 4.5mm thick cconforming to grade Fe-410 or Fe-310. (b) RCC pillar/ brick pillar and painting to steel surface including all connected items shall be measured and paid seperately under relevant items. (iii) Design shall be all as directed by Engr-in-Charge.

S&F Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410 W (Gde-E-250) quality-A complete all as specified and directed.

Preparation of new or previously untreated steel surfaces including and M&L for applying one coat of red oxide primer and two coats of synthetic paint complete all as specified and directed.

M&L for applying two coat of glossy floor guard water based paint, anti-skid, exterior grade (Platinum Series) floor coating to old unrteated concrete surface, cement plastered floors/ surface, concrete floors, cement pavers block, chequared tiles, clay tiles etc similar description of work including necessary prepartion prior to painting on surface with hose to remove loose dust and scrub with wire brush to remove algae, fungus and moos growth complete all as specified and directed. Note:- Allow 7-8 hrs to dry the surface for painting of subsequent coats.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for highly glossy dark coloured tiles design in vertical surface 1200mm x 600mm x 8 to 10mm thick or 900mm x 600mm x 8 to 10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 10 mm thick rendering or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for stone finish kraft cladding wall tiles 15-20mm thick (Square/ rectangular) area of each tiles n exc 0.36 Sqm etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with & including 20 mm thick rendering or bedding layer in cement mortar 1:3 complete all as specified and directed. Note :- Design, colour and pattern as per approved by Engr-in-Charge.

M&L for 10-12 mm thick glossy finish heavy duty vitrified tiles for parking/ path etc (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 10 mm thick screed bed in cement mortar in 1:4 complete all as specified and directed.

S&F Vitrified ceramic, coloured, double charge, dark shade tiles 7-8 mm thick (Square/ Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match with & including screed bed or bedding layer 10 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L for double charged vitrified tiles, 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match with & including 10 mm thick screed bed in cement mortar in 1:4, complete all as specified and directed.

M&L for glazed ceramic coloured tile 350mm x 250mm x 7mm or 450mm x 350mm x 7mm size as in walls; set and jointed in neat cement slurry with & including 10mm thick rendering in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface etc complete all as specified and directed. Note:- Desinger concept tiles matching with exisitng tiles shall be used as directed by Engineer-in-Charge.

M&L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors with & including 20 mm thick screed bed in cement motar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the tile complete all as specified and directed.

S&F in repairs vertical/ roller blinds for windows/ door/ ventelator of any colour and pattern as approved including connected items ie. rod, hook etc complete all as specified and directed.

S&F in repair venetian blinds for windows/door/ventelator of any colour and pattern as approved including connected items ie. rod, hook etc and complete fitting all as specified and as directed by Engineer-in-Charge.

S&F in repairs, decorative WPC sheet (Wood Plastic Composite) 24-26 mm thick having density 600Kg/Cum and fixed to wall & ceiling panelling/ cladding with self drilling screws including necessary frame of aluminium section 51mm x 35mm x 0.55mm and 600 mm c/c 51mm x 32mm x 0.55mm grid work and corner mouldings as required as per manufacturing instruction complete all as specified and directed. Note:- Design and pattern shall be as directed by Engr-in-Charge.

S&F in repairs, Decorative Hollow PVC sheet 10 mm thick (fluted panel) having density not less than 4 Kg/Sqm fixed to wall panelling with self drilling screws including necessary frame of aluminium section 51mm x 35mm x 0.55mm and 600 mm c/c 51mm x 32mm x 0.55mm grid work and corner mouldings as required as per manufacturing instruction complete all as specified and directed.

S&F in repairs Decorative Hollow PVC sheet 10 mm thick fixed to wall and ceiling panelling with self drilling screws including necessary frame of aluminium section 51mm x 35mm x 0.55mm and 600 mm c/c 51mm x 32mm x 0.55mm grid work and corner mouldings as required as per manufacturing instruction complete all as specified and directed.

S&F in repairs double side writing informatory stainless steel reflecting Sign Boards minimum size 4'0" x 3'0"; with Aluminium sheet base of 2mm thickness having retro reflective tape (base, front colour and matter of sign board will be furnished by Engr-in-Charge); frame of sign board shall be using 2'' outer dia stainless steel pipe and having two legs of stainless steel pipe 9'0" long each of 2'' outer dia: legs of board shall be grouted in PCC 1"2:4 type B1 using 20 mm graded stone aggregates with foundation of size 350mm x 350mm x 450mm complete all as specified and directed.

S&F in repairs fabrication of aluminium composite panel of 5mm thick with 0.5 mm aluminium core/skin as top and bottom layer, middle layer 3mm thick of polythenecore (LDPE) and finally with PVDF coating 28 to 32 micron and joints filed with silicon sealant and including aluminium frame of section 37.5mm x 25mm x 1.6mm fixed on the wall/ columns as a cladding and on ceiling of steel structure/ RCC celing withscrew complete all as specified and directed. NOTE: Colour /texture/ pattern shall be asdirected by Engneer-in-Charge.

S&F in repairs 12 mm Plywood, grade BWP, type BB, fixed with fevicol or screws to timber frame work complete all as specified and directed.

S&F in repairs 6 mm Plywood, grade BWP, type BB, fixed with fevicol or screws to timber frame work complete all as specified and directed.

S&F in repairs cupboard, cabinate, wardrobe and kitchen, TV cabinate like similar work are fabricated using 18/19 mm thickness high density fibre board (HDF) exterior grade, fixed with each other using solvent adhesive and fixed to timber frame work with screw complete all as specified and directed.

S&F Continuous (piano) hinges 30mm width of flaps, brass, bright finish or electrogalvanised complete all as specified and directed.

S&F 'L' Bihari, hydraulic, crank, auto hinges,180 degree openable, stainless steel hinges 125mm x 63mm long bright polished fix to steel chowkhat/timmer frame work with screw or nut or bolt complete all as specified and directed.

S&F magnetic catcher 55mm x 29mm size for continuous opening and closing of doors shutter like use for door megnet lock, cupboard magnetic lock, wardrobe, and similar use including all fitting like screw complete all as specified and directed.

S&F stainless steel handle fabricated type, anodised 150mm size complete all as specified and directed.

S&F in repairs stainless steel 304 grade framed work fancy, ornamental type in Gates, stair hosing work, railing and other similar works including welding, grinding, buffering, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable locking arrangement complete all as specfified and directed.

M&L for racking out joints of ceramic tiles as in wall or floor upto 6-7mm deep and repair with neat epoxy adhesive and white cement as required with pigment using chemical for quick setting and stop leakage as specified by manufacturer and making good and check upto 7 days for stop leakage complete all as specified and directed.

S&F in repairs 12 mm thick vertical toughened glass including frame as in door shutters / partition with including stainless steel SS-304 patch fitting fixed with Anchor fastner, etching, pivot arrangements complete each glass panes shall be exceeding 1.5 sqm, but not exceeding 2 sqm each, all edges of glass shall be diamond polished, accurate designed holes to be installed by means of steel fittings including upper patch, lower patch, lock key plate, provision of locking system, etc. Including providing "PUSH" & "PULL" sticker lables of approved design (as per site requirement) complete all as specified and as directed.

All as per BOQ Serial Item No.1.36 above but 12mm thick fully/ partily (as per site requirement) frosted high quality toughened glass with unit colour digital logo and other design/pattern like text in Hindi/English furnished by Engr-in-Charge etc; colour of digital logo/pattern and matter will be furnished by Engr-in-Charge complete all as specified and directed.

S&F in repairs aluminium (extruded section body) hydraulically regulated designation No-3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight betwwen 61 to 80 Kg and fixed complete all as specified and directed.

S&F in repairs double action, floor spring, hydraulically regulated made by minimum 1.25 mm thick aluminium alloy sheet, foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty & fixed, complete all as specified and directed..

S&F in repairs 30 mm dia stainless steel handle of 45 cm long and fixed to toughned glass as per manufacturer's instructions. complete all as specified and as directed.

S&F in repairs stainless steel glass lock fixed to toughened glass as per manufacturer's instructions complete all as specified and as directed.

S&F in repairs stainless steel wire cloth with 8% nickle, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed.

S&F 10 to 12mm thick plaster of paris sheet fixed in ceilings with and including grid made out of angles and tees of 1mm thick G I sheet fixed at not more than 45cm centre to centre in both directions; GrId to be secured by vertical tie of GI sheet angle at not more than 1.2m centre to centre in both directions; veritical tie of GI sheet angle shall be fixed with MS dash through fastners of 8 mm dia: ceiling to be provided at different profiles like curved, flat, sunk, tapered edge and or raised mouding, the joints shall be filled with plaster of paris, necessary arrangement/cut outs hole for ceiling light, etc as required complete all as specified and directed. Note:- 1. Quoted Item rate shall include for working at any height of bldgs and use of scaffolding as all arrangement. 2. Quited rate to include for all kinds of profiles and cut outs required for light fixtures, Speakers, Smoke detector, trap doors and AC grill in the ceiling. Provision for light fittings, AC grills and diffusers have to be made at no extra cost supported with tees, Angles, etc. suitably fixed. The area of these cutouts which is less than 0.6 sqmt for one unit will not be deducted while measuring the ceiling area. 3.The contractor must co-ordinate with electrical & AC contractor for working out various levels for the false ceiling & make the marking on the walls / columns before starting the false ceiling work.

All as per BOQ Serial Item No.1.43 above but providing, making and fixing Gypsum cornice cove (inside height 150 - 200 mm and border 75 mm) or charcoal moulding strip to hide strip/cove light in ceiling or to act as pelmet for roller blinds on windows or for projector screen, etc. complete all as specified and directed.

Preparing of new POP/ false ceiling surfaces and M&L for applying two coats of royale luxury emulsion interior paint a luxurious smooth finish white or coloured with & including a coat of approved primer on walls or ceiling complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregates as in foundations, fillings & mass concrete etc complete all as specified and directed.

M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregates as in coping bed black etc including necessary form work complete all as specified and directed.

M&L PCC 1:3:6, type C2 using 40 mm graded stone aggreagates as in 75 mm thick plinth protection without using extra cement complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in kerbing all around of tiles complete all as specified and directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

M&L Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform, verticle surfaces and any position with & including 15 mm thick rendering in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl chamfering and rounding of edges where required complete all as specified and directed.

Demolition of pre-cast concrete block masonary built in cement mortar including all quoins, arches, pillars etc. and pre cast concrete articles complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks in 10cm in width in type B1 (1:2:4) and setting in mortar (1:6) complete all as specified and as directed

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick/concrete surfaces in CM (1:4), finished even and smooth without using extra cement (WPC to be measured and paid separately) complete all as specfified and directed.

Preparation of new or previously untreated plastered surfaces of walls and M&L for applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern with & including one coat of primer complete all as specified and as directed

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S&F for PVC False ceiling consisting of 600mm x 600mm, 8-10mm thick prelaminated self design including frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof salbs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm angles complete all as specified and directed.

S&F 8 to 10 mm thick density regular edged eco friendly light weight calcium silicate smooth texture false ceiling tiles size 600 x 600 mm even back surface aluminium foil, truly moisture resistance 90% including main T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire / 6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm x 25 mm angles complete all as specified and directed. Note:- Quoted Item rate shall include working upto 15.00 meter height of bldgs and cost of scaffolding as all arrangement.

E/M Works

Taking down carefully copper /aluminium point wiring (light, fan socket or power) through stove enamelled steel conduit/PVC conduits including complete fittings such as switches, ceiling roses, pendants, regulators, sockets,, switch sockets, electrical fittings etc removing and making good disturbed surfaces of walls/ceiling etc, complete all as specified and as directed.

M&L for point wiring fo light/fan/bell point controlled by 1 one way switch using 1.5 Sqmm single core, multi stranded copper conductor 1100 V grade, ISI marked, PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in & including PVC casing caping (ISI marked) of 25 mm wide double locking type including all accessories with & including PVC 1.5 Sqmm multi stranded insulated unsheathed FRLSH copper wire, ISI marked of green colour for continous earth, including sunken box made out of suitable thickness and not less than 60 mm in depth GI/MS/ prssed steel terminal box to be concealled in wall, duly painted including 3mm hylum /masonite sheet cover, for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer complete all as specified and directed. Note : Wiring to be done as per approved colour code.

All as per BoQ Serial Item no.1.64 above but for One light point controlled by 2 way switch SP, 5 Amp, 240 Volts complete all as specified and as directed.

All as per BoQ Serial Item no.1.64 above but one 5 amp socket point on same board complete all as specified and as directed.

All as per BoQ Serial Item no.1.64 above but one 5 amp multi socket indepenedent complete all as specified and as directed.

All as per BoQ Serial Item no.1.64 above but using 2.5 sqmm (nominal area) multistranded FRLSH copper conductor cable/wiredsaz & 2.5 sqmm size PVC insulated unsheathed copper conductor cable for earth continuity (green colour) for one 5 pin socket outlet 5/15 Amp multi purpose independent point controlled by 15 Amp switch, SP one way, 240 Volts & Socket, complete all as specified and directed.

All as per BoQ Serial Item no.1.64 above but using 4.0 sqmm (nominal area) multistranded FRLSH copper conductor cable/wiredsaz & 4.0 sqmm size PVC insulated unsheathed copper conductor cable for earth continuity (green colour) for one 5 pin socket outlet 5/15 Amp multi purpose independent point controlled by 15 Amp switch, SP one way, 240 Volts & Socket, complete all as specified and directed.

S&F Switch piano type flush button type single pole one way 5/6 Amps 240V front operated complete all as specified and directed.

S&F Switch socket combination 2 in 1 3 pin, 5 A and 15Amp flush type universal complete all as specified and directed.

S&F socket 3 pin 5 A flush type complete all as specified and directed.

S&F Bell buzzer 240v 50hz complete all as specified and directed.

S&F Bell push 240v 50 hz complete all as specified and directed.

S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals complete all as specified and directed.

S&F in repairs switch piano flush button single pole one way, 6 Amp complete all as specified and as directed.

S&F in repairs Switch socket outlet 2 in 1, 3 pin, 6 Amp flush type complete all as specified and as directed.

S&F in repairs Socket outlet 2 in 1, 3 pin, 6 Amp flush type complete all as specified and as directed.

S&F in repairs Switch bell push flush type 5 Amp complete all as specified and as directed.

S&F in repairs Switch socket combination outlet 15 Amp, 5-in-1, controlled by one switch complete all as specified and as directed.

S&F in repairs Switch flush button, single pole two way, 6 Amp complete all as specified and as directed.

S&F in repairs Socket type EME fan 5 step regulator switch/socket type for ceiling fan of suitable size, complete all as specified and as directed.

S&F in repairs Lamp holder/angle holder insulated body with black/white plate for batten fittings complete all as specified and as directed.

S&F in repairs modular step type fan regulator 120 watt ,AC, 220V, 50hz complete all as specified and as directed.

S&F in repairs modular switch 1 module 6 amp one way complete all as specified and as directed.

S&F in repairs modular switch 1 module 16 amp one way complete all as specified and as directed.

S&F in repairs modular socket 2 module universal type 5/6 amp one way complete all as specified and as directed.

S&F in repairs modular socket 2 module universal type 6/16 amp one way complete all as specified and as directed.

S&F in repairs modular bell push 6A 1 module complete all as specified and as directed.

S&F in repairs Bell buzzer, ding dong AC,230V, 50hz single pole complete all as specified and as directed.

S&F in repairs modular cover plates with frame up From 1 /2 to 3 module as per site requirements complete all as specified and as directed.

S&F in repairs modular cover plates with frame up from 4 to 12 module as per site requirements complete all as specified and as directed.

S&F in repairs modular metal flush box as per site requirements from 1/2 to 3 modules complete all as specified and directed.

S&F in repairs modular metal flush box as per site requirements from 4 to 12 modules complete all as specified and directed.

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 4.0 Sqmm (with colour code), drawn in and including non metallic rigid PVC conduit of 25mm dia/casing capping/ suitable size , ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 4.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surfaces/ recess complete including taking down complete all as specified and as directed.

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 6.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25mm dia/casing capping/suitable size, ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface/ recess complete including taking down complete all as specified and as directed.

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 10.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25mm dia/casing capping/suitable size, ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 10.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface/ recess complete including taking down complete all as specified and as directed.

M&L cutting of wall/ceiling/column for laying submain of any size including plastering ,white wash complete all as specified and as directed.

S&F in repairs LED building security light fitting with suitable size bracket/angle with three core flexible wire to fit security light of 45 w IP 66 protection LED complete all as specified and as directed.

S&F in repairs LED batten with 20/22W LED tube light in wall/surface connecting with all required accessories like PVC box base,flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories complete all as specified and as directed.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 12 way double door open able, including taking out old unsv MCB DB any size/type complete all as specified and as directed.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 8 way double door open able, including taking out old unsv MCB DB any size/type complete all as specified and as directed.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 4 way, including taking out old unsv MCB DB any size/type complete all as specified and as directed.

S&F double door MCB VTPN DB 4 WAY made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 4 way, including taking out old unsv MCB DB any size/type complete all as specified and as directed.

S&F double door MCB VTPN DB 8 WAY made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 100 Amps rated bus bar 4 way, including taking out old unsv MCB DB any size/type complete all as specified and as directed.

S&F in repairs 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series) complete all as specified and directed.

S&F in repairs SPN 32 AMP MCB DP 240 V 10 KA (C-Series) complete all as specified and directed.

S&F in repairs LED recess/surface mounted 2x2 luminarie 36w fitting, 220 V, AC,50HZ suitable surge protection, high power factror,driver etc complete including flexible wire and connected accessories complete all as specified and as directed.

S&F in repairs LED tube rod 20/22 watt, 220V, AC, 50Hz change with existing any tube rod including flexible wire and connected accessories complete all as specified and directed.

S&F in repairs LED batten 10w, 2 feet with LED tube light 220V, AC, 50HZ in wall/surface connecting with all required accessories like flexible cable from ceiling rose etc complete all as specified and as directed.

S&F in repairs MCCB 4 pole, thermal magnetic release range 100 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and as directed.

S&F in repairs MCCB 4 pole, thermal magnetic release range 125 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and as directed.

M&L for daily complaint checking & repairing of DBs/meter panel board/circuits/submain wiring/switches/sockets etc and other connected work including rectification of faults complete all as specified and directed

S&F in repairs three pin top of capacity 15 amp ,AC,220V complete all as specified and as directed.

Fixing only flame proof light, high bay/low bay, any type, etc including necessary fixing arrangement including taking down complete all as specified and directed.

S&F in repairs GI sunken/terminal box of size approx 10cm x 10cm, concealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls complete all as specified and as directed.

S&F in repairs GI sunken/terminal box of size approx 15cm x 7.5cm, concealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls complete all as specified and as directed.

S&F in repairs GI sunken/terminal box of size approx 20cm x 15cm, concealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls complete all as specified and as directed.

S&F in repairs GI sunken/terminal box of size approx 20cm x 25cm, concealed/surface mounted alongwith hylam sheet for fixing existing switches, sockets & regulators etc and making good disturbed surfaces of walls complete all as specified and as directed.

S&F in repairs round/square type, recessed /surface 12W/14W warm white LED downlight dimmable with high lumen 230V, compatible with Legrand Dimmer complete all as specified and directed.

M&L for taking out and refixing of tube light, mirror light etc after cleaning and any type and rectifiying defects complete all as specified and as directed.

S&F in repairs LED batten with 20W LED tube light (four feet) with inverter type with 2 hrs backup in wall/surface connecting with all required accessories like PVC box base,flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories complete all as specified and as directed.

M&L checking ceiling fan of size 1200/1400mm and change defective part cotter pin/ nut bolt etc complete all as specified and as directed.

M&L for earthing with GI earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 32 x 6 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4) type B1 using (20 mm graded stone aggregate), mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering, 40 mm dia light grade GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-1(2009) connected to earthing test point including testing on completion and taking down old u/s materials complete all as specified and directed. NOTE: (i) The earth chamber shall be constructed 0.50m away from the edge of earth pit and the cost of the same is deemed to be included in quoted unit rate. (ii) GI Strip and protection pipe upto 7.5m is deemed to be included in the quoted unit rate. (iii) GI watering pipe upto 1.2m s deemed to be included in the quoted unit rate.

S&F in repairs GI strip 32mm x 6 mm saddle in wall for loop earthing and ground grid complete all as specified and as directed.

S&F in repairs fan rod of size 1/1.5 feet suitable for mounting ceiling fan of size 1200/1400 mm complete all as specified and as directed.

S&F in repairs flexible wire 1 sqmm X 2 core complete all as specified and as directed.

Removing existing worn out CI cover with angle iron frame of earth chamber and S&F CI cover of size 300mm x 300mm x 6 mm thick fixed in frame made out of mild steel angle iron 40mm x 40mm x 6mm thick with and including locking and lifting arrnagement with & including painting with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for enhancement of soil resistivity of earthing by taking out pit cover and filling salt water through watering pipe of earth pit for improvement of earth resistance complete all as specified and as directed.

S&F jointing, connecting & testing 10 sqmm X 2 core, XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor as in saddle on wall, in trenches / ducts/ of the including taking out cable cover & cable complete all as specified and as directed.

S&F in repairs modular type AC box with three pin socket and plug top and 20 amp single pole MCB complete all as specified and directed .

S&F in repairs two way sheet metal enclosure with three pin socket and plug top and in cuding 1 No. 20 amp single pole MCB complete all as specified and directed .

M.K Enterprises (BID ID -3415158)

M/s S.D Construction Co (BID ID -3415567)

BALAJI TRADERS (BID ID -3415335)

kalakriti enterprises (BID ID -3414977)

Sagar Electricals (BID ID -3412694)

EVEREST CONSTRUCTION (BID ID -3415129)