PERIODICAL SERVICE TO MD ACCN IN THE AOR OF AGE BR-I UNDER GE HISAR AT HISAR MIL STN

Taking down cement plaster or cement lime plaster on stone surface/brick surface of wall including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed by Engr-in-charge.

M&L for 10mm thick rendering in cement mortar (1:6) on fair faced or on other than fair face surface of brick masonary or concrete surface of wall, finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old/new plastered walls and applying avg 3mm wall care putty complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer of same make complete all as specified and directed.

M&L for preparation of new surfaces (plastered or unplastered) of walls and applying two coat of white wash, complete all as specified & as directed.

M&L for rendering 5mm thick in CM 1:3 as in ceiling/landing etc on concrete surface finish even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash on undecorated surface complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faced or on other than fair face surface of brick masonary or concrete surface of walls, finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surface of wall and applying two coats of external emulsion paint using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard techonology and capability of tracking pressure and paint usage as as per manufacturer instructions & technical data, accessories for applying external emulsion paint should be able to spray in hard to reach areas and penetration of external emulsion paint on the surface over and including one coat of acrylic waterbased exterior grade primer @ 0.8 ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of 01 ltr per minute having a pressure of 3300 PSI, (Allow 6-8 hrs to dry the surface for painting of before applying subsequent coats) over and including one coat of water proofing cement based putty @ 1 kg(undiluted) per sqm of average thickness 1mm over the plastered wall after prepare the surface even and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc, by skilled labour complete all as specified and directed by Engr-In-Charge.

M&L for complete removal of existing treatment and applying two coat of distemper oil emulsion over and including one coat of alkali resistance primer on wall surfaces complete all as specified and as directed.