Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹1.7 L Per unit ₹27,966 · 6 Nos. | |
| 2 | ₹3.1 L Per unit ₹34,100.82 · 9 Nos. |
Tender Value
Refer Docs
EMD Value
₹57,010
Closing Date
7 Sept 2026, 10:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
180 days
Expenditure
General
P5
1 condition
Railway reserves the right to place bulk order on OEM or their authorized dealers. Dealers participating on behalf of OEM should upload tender specific authorization from OEM. Offers from sub dealers will not be considered.
31 conditions
Have you read and accepted tender conditions?
Have you furnished the statement of deviations
Have you attached any performance statements separately
Are you coming under MSE status given as per guidelines issued by Railway Board for purchase preference vide letter No. 2010RS[G]-363-1 Dt. 05.07.2012 or latest. In this connection, please refer Para 13 of Section I Instructions to tenderers stipulated in the tender booklet version attached as an accompaniment to this tender
If yes, have you attached valid documents towards being MSE
Have you submitted authenticated copy of the document authorizing the signatory to submit offer and commit on behalf of tenderers. Other conditions will be as per attached tender document.
Have you quoted delivery period correctly and precisely
Have you quoted Mode of dispatch on FOR destination basis for free delivery at destination with rate structure clearly indicating the basic rate, GST and freight etc, up to destination [consignees premises].
Have you quoted the discount if any in the specified column only in IREPS?
Have you furnished Bank account details such as Name of the Bank and address, account no., MICR, IFSC code and type of account to facilitate EFT payment?
If not are you ready to pay Security Deposit ?
Have you paid the EMD online ? If not then have you uploaded relevant document for seeking exemption from submission of EMD ?
Have you kept offer valid for 180 days ?
Have you read the Security Deposit (SD) condition at Para6of the attached Tender booklet and uploaded relevant document for seeking exemption from submission of SD.
All firms claiming for MSE benefits Should attach UDYAM registration Certificate with Valid Registration as on date
The 'Class-I local supplier'/'Class-II local supplier' at the time of tender, bidding or solicitation shall be required to indicate percentage of local content and provide self-certification that the item offered meets the local content requirement for 'Class-I local supplier'/'Class-II local supplier', as the case may be.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
4 conditions
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.
Bidders should confirm following certificate for Compliance. (a) I have read the clause 32 of the conditions of SWR/MMD General Conditions Of Tenders For Supply Contract Dated: 06/10/2025 attached with the tender regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries. (b) I certify that this bidder is not from such a country and will not subcontract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I also certify that this bidder will not offer any products/services of entity from such countries unless such entity is registered with the Competent Authority. (c) I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (d) I hereby acknowledge that in the event of acceptance of my bid on above certificate and if the certificate is found to be false at any stage, the false certificate would be a ground for immediate termination of contract and further legal action in accordance with the Law. Bidders confirming this certificate for Compliance shall select Yes in the Complied column. However, in case you do not confirm above certificate for Compliance, select NO in the complied column. In such cases you are required to submit the certificate for Compliance as per clause 32 of the conditions of SWR/MMD General Conditions Of Tenders For Supply Contract Dated: 06/10/2025 along-with their Bid/Offer.
Code of Integrity Declaration: I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 20 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that no other concerns or affiliates (such as having common partner/ director/promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest, anti-competitive practices and obligation to proactive disclosures. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected at any stage.
1 location across Karnataka · 74 Numbers total
PROCUREMENT OF DIFFERENT TYPES OF CONVEYOR BELTS FOR THE USE OF BCM, FRM & PBR MACHINES
60265274~SWR
60265274
Open - Indigenous
Goods
Karnataka
₹0
₹57,010
8 Oct 2026
16 Aug 2026
8 items · 74 Numbers total
Transfer Conveyor belt for FRM machines, PLASSER PART NO - RE30.425, Size -15000x850x1 0mm, Type - Open end, Make:-Plasser, Dunlop, Nirlon,MRF,MR,Virshubh,Biswas& Jagriti, Specification of All conveyor belts: 500/3 Ply, 5mm thick rubber at top + 3mm Ply Nylon+2MM thick bottom rubber covering gr ade M24 (minimum tensile strength: 24Mpa,minimum elongation at break:450 percent,maximum abrasive l oss:150mm2 ) having Shore A hardness of typically range 60 to 70 confirming to IS-1891(Part-1)-1994 [ W arranty Period: 18 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/TM/TRAC/YPR, SWR | Karnataka | 8.00 Numbers |
| Total | 8 Numbers | |
Waste conveyor belt for BCM Machines, PLASSER PART NO - 64.11.2666, Size: 11250X800X1 0mm, Type -ENDLESS, MAKE: PLASSER, DUNLOP, NIRLON, MRF, MR, VIRSHUBH, BISWAS & JAGRITI [ Warra nty Period: 18 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/TM/TRAC/YPR, SWR | Karnataka | 10.00 Numbers |
| Total | 10 Numbers | |
DISTRIBUTOR CONVEYOR BELT FOR FRM MACHINES, PART NO. RE20.580, DIMENSIONS- LENG TH:14000mm, WIDTH:650mm, THICKNESS:10mm, TYPE - OPEN END MAKE:PLASSER, DUNLOP, NIRLON, MR F, MR VIRSHUBH, BISWAS & JAGRITI, Specification of All conveyor belts: 500/3 Ply, 5mm thick rubber at top + 3mm Ply Nylon+2MM thick bottom rubber covering grade M24 (minimum tensile strength: 24Mpa,minim um elongation at break:450 percent,maximum abrasive loss:150mm2 ) having Shore A hardness of typicall y range 60 to 70 confirming to IS-1891(Part-1)-1994 [ Warranty Period: 18 Months after the date of deliv ery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/TM/TRAC/YPR, SWR | Karnataka | 16.00 Numbers |
| Total | 16 Numbers | |
Main Conveyor Belt for FRM machines (Size:40000X850X10 MM) Type-Open End, Plasser Part No: RE30.325 MAKE: PLASSER, DUNLOP, NIRLON, MRF, VIRSHUBH, BISWAS, M R BELTING & JAGRITI, Specific ation of All conveyor belts: 500/3 Ply, 5mm thick rubber at top + 3mm Ply Nylon+2MM thick bottom rubber covering grade M24 (minimum tensile strength: 24Mpa,minimum elongation at break:450 percent,maximu m abrasive loss:150mm2 ) having Shore A hardness of typically range 60 to 70 confirming to IS-1891(Part- 1)-1994 [ Warranty Period: 18 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/TM/TRAC/YPR, SWR | Karnataka | 8.00 Numbers |
| Total | 8 Numbers | |
Distributor Conveyor Belt for BCM Machines, Plasser Part No. 64.11.3855, Size 14090X650X1 0mm, Type: Open End, MAke/Brand: Plasser, Dunlop, Nirlon, MRF, MR, Virshubh, Biswas & Jagriti [ Warrant y Period: 18 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/TM/TRAC/YPR, SWR | Karnataka | 9.00 Numbers |
| Total | 9 Numbers | |
CONVEYOR BELT, PT.NO.CRW400.9425-SP.1668 MAKE: PLASSER, DUNLOP, NIRLON, MRF, VIR SHUBH, BISWAS, M R BELTING & JAGRITI, Specification of All conveyor belts: 500/3 Ply, 5mm thick rubber at top + 3mm Ply Nylon+2MM thick bottom rubber covering grade M24 (minimum tensile strength: 24Mpa,mi nimum elongation at break:450 percent,maximum abrasive loss:150mm2 ) having Shore A hardness of typi cally range 60 to 70 confirming to IS-1891(Part-1)-1994 [ Warranty Period: 18 Months after the date of d elivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/TM/TRAC/YPR, SWR | Karnataka | 6.00 Numbers |
| Total | 6 Numbers | |
Excavating conveyor Belt for FRM machines of dimension(L:19500mm,W:500mm,T:10mm) T ype:Open end ,cleat type moulded, with cleats placed at 75mm away from end as per Plasser Part No. RE2 0.725. Make/Brand: Plasser, Dunlop, Nirlon, MRF, MR,Virshubh, Biswas, & Jagriti [ Warranty Period: 18 Mo nths after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/TM/TRAC/YPR, SWR | Karnataka | 9.00 Numbers |
| Total | 9 Numbers | |
MAIN CONVEYOR BELT FOR BCM MACHINES, PLASSER PART NO.: 64.11.10071, DIMESIONS: L ENGTH-40000mm, WIDTH-800mm, THICKNESS-10mm; MAKE- Plasser, Dunlop, Nirlon, MRF, MR, Virshubh, B iswas, M R Belting & Jagriti, Specification of All conveyor belts: 500/3 Ply, 5mm thick rubber at top + 3mm P ly Nylon+2MM thick bottom rubber covering grade M24 (minimum tensile strength: 24Mpa,minimum elong ation at break:450 percent,maximum abrasive loss:150mm2 ) having Shore A hardness of typically range 6 0 to 70 confirming to IS-1891(Part-1)-1994 [ Warranty Period: 18 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/TM/TRAC/YPR, SWR | Karnataka | 8.00 Numbers |
| Total | 8 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5563533.pdf
ATTACHMENT
5563528.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .