Providing paver block road at Rise mill street in Achankuttam village and panchayat

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with smallsized boulders and hard gravelly soilas per SS 20B

Cement oncrete 1:4:8 mix using 40mm ISS mctal including cost and conveyance of all materials to site and fall labour charges for mixing,laying and curing etc complete for 10 cum.

Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical ier etc using mild steel sheets off size 90 60 cm and 10 guage stiffened, welded vith mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x .5em spaced ofabout 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre t entre complete complying with standard specifications and as directed by departmental fficers including conveyance of all materials to site and proper centering etc complete.

Cement oncrete 1:3:6 mix using 20 mm I1 metal including cost and conveyance of all materials to site and, all labour charges for mixing, laying and curing etc [complete _ for 10 cum.

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing |425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in| uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in -place method)

Providing and Laying Paver Block of 80mm thick lapproved design made out of 12mm and 6mm HBGS |chips in M30 mix properly cured to attain the required strength, Laying and interlocking block and well compacted using 1-3 ton capacity compressor, the cost (inclusive of all materials for manufacturing, interlocking |block loading transportation to work site unloading and |labour charges for fixing over Sand bed of 30mm thick &Joints filling using compressor of 1-3 ton capacity including hire and fuel charges for compressor and all other incidental charges etc complete.

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}