Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹65.9 LAccepted-Finance 5D 95 VRINDAVAN YOJNA RAEBARELI ROAD LUCKNOW UP 226 029 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226029 | L1 | Accepted-Finance Lowest One | |
| 2 | L2₹72.3 L+₹6.3 L (9.61%)Rejected-Finance FLAT NO A 102 ASHOKVAN RAJSHIV CO OP HSG SOC SHIV VALLABH ROAD DAHISAR EAST MUMBAI 400 068 | MUMBAI SUBURBAN | MAHARASHTRA | 400068 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹72.7 L+₹6.7 L (10.2%)Rejected-Finance ROOM NO 997 GALI NO 3 PART NO 3 GANESH MURTHY NAGAR CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹73.7 L+₹7.8 L (11.8%)Rejected-Finance 5 6 MINTO ROAD ALLAHABAD 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹76.9 L+₹10.9 L (16.6%)Rejected-Finance GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | L5 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
14 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NOFRA
Dr Homi Bhabha Road New Navy Nagar Colaba Mumbai
REPAIR TO SUNKEN FLOOR OF BATHROOM AND REPAIR REPLACEMENT OF FOOT PATH DRAIN COVERS AND STONE CHEQURED TILE UNDER CELL NO 2 OF GE NW NOFRA COLABA MUMBAI
2023_MES_594970_1
8169
Open Tender
Civil Works
Item Rate
300 days
Mumbai
Please refer tender docuements
8 documents required · 8 mandatory
₹1,000
GE NW NOFRA
₹1.7 L
Yes
17 Oct 2023
12 May 2023
16 Jun 2023
12 May 2023
14 Jun 2023
31 May 2023
12 May 2023 - 25 May 2023
Amount
M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick rectified (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge Make : Kajaria, Somany, Orient bell
M & L Glazed ceramic tiles in vertical surfaces 200x300mmx7mm thick including over 10mm thick rendering of cement mortar (1:4) for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge. Make : Kajaria, Somany, Orient bell
M & L Glazed coloured ceramic tiles in vertical surfaces 300mmx450mmx7mm thick including over 10mm thick rendering of cement mortar (1:4) for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge. Make : Kajaria, Somany, Orient bell
Treatment of sunken floor slab compraises of the following specifications and all as specified :-
(i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout (Cost cutting holes and pipes shall be measured and paid separately)
(ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out.( WPC shall be measured & paid separately)
(iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty.
(iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.
(v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.(This item shall be measured and paid separately)
(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout.( WPC shall be measured & paid separately)
(vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint (this item shall be measured & paid separately)).
Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test shall be done in presence of reps of PMG and record for each sunken slab shall be maintained. Cost of testing is inclued in the rates quoted above.
Cutting holes in bricks or RCC walls exc half brick built in cement mortar including making good after inserting and setting spouts all as specified.
GI pipe 50mm dia medium grade laid on sunken floor complete all as specified and direced by EIC.
All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round including painting with anticorrosive paint
M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. Make :- Pidilite, Sico, Dr fixit, Shalicem
M & L Injection grouting in RCC slab shall be cast/laid to the slope as directed/as per site conditions. After RCC slab is laid, cured and fully set, water shall be ponded in the sunken slab portion as per specified ponding test. The location of seepage/leakage, if any, shall be identified and marked. The portion of the slab where leakage/seepage is observed shall be repaired with grouting at contractor's expences. The area of dripping/leakage shall be cleaned to expose the surface. Mark the spots for injection grouting. If leakage is through a crack, mark grouting points along the crack in a staggered manner. If the leakage is across the area mark grouting spots in a grid pattern. Drill grouting holes so as to neatly fit the injection packers. Drilling to be done at an angle of 45 to the plane of grouting surface. Fix PVC/MS nozzles in the low viscosity, polyurethane resin/epoxy grout using a grouting pump. Repeat the process after 1 or 2 days if the leakage continues at some point. allow to cure for 24 hours and seal the grouting holes appropriately using epoxy putty etc complete all as specified and as directed. Make :- Dr Fixit, Pidilite
Supply only Integral water proofing compound. Make :Pidilite, Dr Fixit, SICO
Demolition of Cement concrete in any description and in any position not other wise specifically provided directed by Engineer-in-Charge and removal of debris to out side MD land.
M&L PCC 1:7:12 with brick aggregate as in lean concrete/filling concrete
Taking down Cast iron/AC/PVC pipe of any dia and size fixed on wall or floor including all fittings complete all as specified.
S&F 100 mm dia sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste fixed to wall. Make :- Neco, TISCO, Jindal, Kalinga
Ditto as item no 13 above but 75mm
M&L in repair100mm. cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) Make :- Neco, TISCO, Jindal, Kalinga
Ditto- as per item 15 above but 75mm dia .
S&F in repair 100 mm dia sand cast CI bend of any radius with ovel access door and jointed with neat cement paste. Make :- Neco, TISCO, Jindal, Kalinga
Ditto- as per item 17 above but 75mm dia .
S&F in repair 100 mm dia branch piece single branch of any radius with ovel access door and jointed with neat cement paste. Make :- Neco, TISCO, Jindal, Kalinga
S&F in repair 100 mm dia branch piece double (equal or unequal) ordinary or inverted or with parallel brach and jointed with neat cement paste. Make :- Neco, TISCO, Jindal, Kalinga
S&F 160mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.
S&F 160mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge.
S&F 75mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.
S&F 75mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge.
S&F WHB/Kitchen sink collapsible waste pipe out let upto Nahani trap complete.
S&F in repairs 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed Make : Jaquar ESSCO cat part No. DLX-507, or Marc or equivalent in kohler
S&F in repairs PVC low level flushing cistem including brackets 10 litre capacity in repairs. Make : Cera, Sleek essence series of Hindware or equivalent in Parryware
Removing and refixing only high or low level flushing cistern (inclusive of brackets),and connection to pipes .
Removing and refixing only Vitreous china wash basin white flat back any size incl brackets if required complete.
S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with PVC white seat cover with mild steel chromium plated or aluminised hinging device including connection to drowm pipe PVC connection and flushing pipe all as specified. Make :- Jaquar ESSCO Cat Part No. ECS-551PN (P-Trap) or Equivalent in Parryware, Grohe
S&F in repairs, Plastic water closet seat covers, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. Make :- Jaquar ESSCO Cat part No. ECS-WHT-109N or equivalent in Hindware, Parryware
S&F stainless steel grating cover fixed in repairs to suit the 100mm/75mm dia nahani trap fixed with cement.
S&F Wash hand basin vitreous china White flat back size 550mmx400mm including cast iron brackets, chromium plated waste coupling, PVC connection, waste pipe up to floor trap etc in repair all complete as specified. Make: Jaquar ESSCO Cat part No. ECS 801 or Grohe orequivalent in HINDWARE
S&F 100mm dia CI sanitary connection- short connections pipe of length upto 300mm
M&L Vitreous water closet (orissa pattern) 'long pan', white with 'P' or 'S' trap, front or back inlet any pattren complete fixed in repairs complet all as directed. Make :- Jaquar CNS-WHT-453 or equivalent in Hindware
M & L Polished granite stone slab 18 to 20mm thick coloured as in cooking platform/door sills , set in cement mortar (1:4) including pointing in white cement (1:2) and jointed with grey cement slurry and pointed in neat white cement slurry mixed with pigment to match the shade of floors, including moulding at front edge or both edges including dismantling complete all as specified and as directed by EIC complete. Note : Quality of granite all as approved by GE
Supply and fix in repair white rectangular PVC water storage tanks (Loft tank) of capacity following sizes with complete fitting including fixing 03 Nos tank nipples of GI with washer for out let and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank to store complete all as specified and directed. Make: Sintex ,Infra,Polycame.
Supply and fix in repair PVC profile suitable for PVC Loft tank of capacity following sizes including fixing aluminium channel around the profile complete all as specified and directed. Make: Rajashree,Sintex,Polycame
Preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. Make :- Asian (Apcolite) or Nerolac (Hi-gloss) or Berger (Luxol Hi-gloss)
M&L French polishing on wooden surfaces of any description width or girth including cleaning and prepairing the surfaces including a coat of wood filler on old surfaces with two coat all as specified.
Resecuring or easing & adjusting without taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each
Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc.
M&L Rendering in cement mortar 1:6, 15mm thick on fair face of brick work and finised even and smooth without using extra cement.
M&L for Rendering 10 mm thick cement plaster in brick or concrete surfaces in CM 1:3 as in ceiling/Chajja finished even and smooth without using extra cement.
Rendering 20mm thick on other then fair face of brick work or concrete in two coats 15mm thick cement mortar 1:4 and 5mm thick each coat mixed with water proofing powder at rate of 2% of cement or as per manufacturers instructions and at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge. Note:-(i)Water proofing compound shall be measure sepratly under respective item. (ii) Rate included for Necessary Scaffolding.
M&L preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer on walls. Make for OBD :- Berger Commando, Asian paint Tractor Emulsion or equivalent in Nerolac
M&L Preparing surface of new plastered ceiling/ and apply three coat of white wash.
M&L Preparing surface of old plastered ceiling and apply two coat of white wash.
M & L preparation surfaces of new plastered surfaces wall/chajja and applying one coat of acrylic exterior primer and apply two coats acrylic emulsion exterior grade (100%) etc all as spacified & as suggested by the manufacturers at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge. Make :- Asian Apex, Berger Weather Coat, Dulux Weather Shield .
Taking down chowkhats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm each .
S&F PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tubecomplete all as per specification and all as per drawing. Make :- M/s Sintex Industries Ltd, M/s Rajshree Plastiwood Ltd,
S & F factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for styleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and as per drawing. Make :- M/s Sintex Industries Ltd, M/s Rajshree Plastiwood Ltd,
S & F 100mm size medium weight stainless steel butt hinges (IS).
S & F extruded aluminium alloy handles 150mm size, fabricated type, anodised (IS).
S&F Aluminium, anodised, barrel tower bolts 150mm size of extruded section (IS).
Taking up & down steel tubing & connections of follwing size complete all as specified and directed.
(a) 20 mm bore
(b) 15 mm bore
S&F GI water tubing medium grade (ISI marked) including with all fittings and fixed to wall /ceilings laid in floor or concealed of follwing size complete all as specified and directed. Make :- Tata, Swastik, Jindal, Prakash, Surya
(a) 20 mm bore
(b) 15 mm bore
M&L for cutting chases for concealed water tubing and making good in cement mortar 1:3 girth of cutting n.exc 10cm in brick walls complete all as specified and directed.
Demolition of brick work built cement mortar at any position and condition incl removing of demolished material to store.
M & L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6.etc complete all as specified by Engineer - In - Charge.
S&F PVC cabinet mirror 450X300 mm with 3 mm thick mirror. Make : Prayag
S&F Toilet paper holder along with cover of stainless steel suitable for 120mm width and 100mm depth long paper fixed to walls sample approved by GE (CAT No. JAQUAR CAT No. 1151N or Equivalant in HINDWARE / PARRYWARE
S&F decorative corner, 6mm thick glass self round, 300mm size with SS railing 25mm high in bath room, fixed with 'D' type brackets on walls af approved make and pattern.
S&F in repair CP brass 125mm size shower rose with rubit cleaning system with shower arm and flange suitable for 15mm bore GI tubing complete all as specified.
S&F in repair Fancy type bib taps brass CP with wall flange suitable for 15mm bore GI tubing with necessary fittings complete all as specified.
S&F in repair Fancy type two way bib taps brass CP with wall flange suitable for 15mm bore GI tubing with necessary fittings complete all as specified.
S&F in repair Fancy type Brass CP mixer formixing hot & cold water screwed down for iron pipe and fixed 15mm bore GI tubing with necessary fittings complete all as specified.
S&F in repair fancy type CP brass angular stop cock suitable for 15mm bore GI tubing, with necessary fittings complete all as specified and directed.
S&F in repair fancy Concealed stop valve with long shark and adjustable wall flange including union suitable for 15mm bore GI tubing, with necessary fittings complete all as specified and directed.
S&F PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, fixed in repairs complete all as specified and directed by Engr-in-charge.
S&F PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed in repairs complete all as specified and directed by Engr-in-charge.
Supply and fix in repair chromium plated brass health faucet (hand shower) with 8 mm dia with 1 mtr long flexibale tube wall mounted / hooked incl all fittings and as directed Make : Jaquar cat part No. 573 of Jaquar or Essco
Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thick above or below ground level including removal of debris out of Mod Land.
M &L 25 mm Cement concrete type -2 , 1:3:6 ( 40 mm graded aggregate ) finishing cement concrete surfaces even and smooth without using extra cement complete all as specified
M&L 25 mm thick Sand filling for or sub base of finishes including consolidation all as specified.
M&L 80 mm Machine pressed precast interlocking paver block any shape and size confirming to IS 15658-2006 , M-35 grade with grey cement and pigmentfixed with cement all as specified
Painting lines/arrows on road pavement n.exc. 10cm wide with road marking paint white or golden yelow
Material and labour for PCC (1:2:4) type B1, using 20mm graded stone aggregate as in coping, kerb stone pcc or similar places etc incl dismantiling of exsting concrete complete all as specified and directed by Engr-in-Charge
Dismantling brick work built in cement mortar and removing the rubbish outside MD land ,complete all as specified and directed.
M&L for brick work with sub class B brick straight or curved on plan exc 6m mean radius built in cement mortar 1:4 ,complete all as specified and directed.
M&L for brick work with sub class B brick straight or curved on plan to any radius in half brick wall built in cement mortar 1:4 ,complete all as specified and directed.
Taking down cement plaster on brick wall including raking out joints, hacing for key, scrubbing down with water, etc.,complete all as specified and directed.
Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work finished even and smooth (without using extra cement) ,complete all as specified and directed.
Supply only intergral water proofing compound powder confirming to IS- 2045,complete all as specified and directed.
M&L Hardcore of gauge not exc 63mm broken stone or boulders but not exc 100mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rolled/rammed to a true surface for levelling the surfaces,complete all as specified and directed.
M&L for cement concrete type B1 1:2:4 (20mm graded aggregate) cement concrete in lintels upto 1.5 m clear span, cills, steps, ceismic & other similar bands, plinth courses, string courses, lacing courses, parapets and rallings upto 60cm in height, coping etc. ,including necessay formwork complete all as specified and directed.
M & L 100 mm thick cement concret type C-2 1 : 3 : 6 ( 40 mm gaded aggregate as in floor repairs, sub base similar work ,including demolition complete all as specified and directed.
M & L 75 mm thick cement concret type B-2 1 : 2 : 4 ( 40 mm gaded aggregate as in floor finishes, plinth protection, including demolitionn complete all as specified and directed.
M & L 40 mm thick cement concret type B-1 1 : 2 : 4 ( 20 mm gaded aggregate as in floor finishes, sub bases including demolition, complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in floor etc. complete all as specified
M&L for Chequered cement concrete tiles 300x300x25 mm/200x200x25 mm etc. glosy finish set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over and including screed bed of 20mm thick in CM 1:4, includig dismantling complete, all as specified and as directed by Engr in Charge.
Dismantiling and refixing after preparation of sub base, 25mm thick coloured chequred cement concrete tiles with gray cement and colour pigment of size 300mm x 300mm/200x200mm set, jointed and pointed with neat cement slurry with as in floor including 20mm thick cement mortar screed bed in CM 1:4 ,complete all as specified and directed.
M&L for plain cement concrete colour interlocking tiles 80 mm thick having (colour and pattern approved by GE) strength not less than 350 Kg/Sq CM laid over and including 50 mm thick dry sand cushioning and void filled with dry and compact, including compation by means of surface vibrator, includinng dismantling complete all as specified and directed by Engineer-in-Charge.
M&L for plain cement concrete colour interlocking tiles 60 mm thick having (colour and pattern approved by GE) strength not less than 350 Kg/Sq CM laid over and including 50 mm thick dry sand cushioning and void filled with dry and compact, including compation by means of surface vibrator, includinng dismantling complete all as specified and directed by Engineer-in-Charge.
Dismantiling and refixing after preparation of sub base, 60mm/80 mm thick coloured interlocking tiles with gray cement and colour pigment set, jointed and pointed with neat cement slurry with as in floor including 20mm thick cement mortar screed bed in CM 1:4 and complete all as specified and directed.
S&F in repairs cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, ralling, frames, manhole covers, fire and shoot doors,balusters and similar articals exc 5 kg each by weight ,complete all as specified and directed by EIC
M&L RCC 1:1 1/2:3 type A1 (Using 20mm graded stone aggregate) as in pre-cast cover slabs of any size and thickness with plain fair faces, fixed, set and jointed in CM 1:4 ,including demolition and necessary formwork complete all as specified and directed.
S & F in repair Mild steel framed work (Fe-410-O) or (Fe-310-O) such as grill, gratings, sheet including welding to purpose made hinges etc with the ends of bars shoulders or riveted or forged into spikes framed guard bars railing and similar works fixing with bolt etc ,complete all as specified and directed.
S & F in repair MS plate (CHEQUERED) 5mm and over as in manhole cover fixed to angle iron frame with three Nos of hinges and 150 mm handle complete all as specified and directed.
M & L for preparation of new or previously untreted steel surface of any description over 10 cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer ,complete all as specified and directed.
M & L for preparation of old or previously untreted steel surface of any description over 10 cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer,complete all as specified and directed.
M&L preparation of new plastered surfaces and applying three coats of white wash on walls,complete all as specified and directed.
Removing and refixing of MS / Steel drain cover with steel frame after peaparation of base/edegs of menhole / drain,complete all as specified and directed.
Taking down rain water pipes/PVC pipes/cemented pipe (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc.,at any height, any location, any floor including all necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.
S&F 160mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.
S&F 160mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge.
S&F 75mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.
S&F 75mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge.
M & L preparation of new plastered surfaces and apply one coat of acrylic exterior primer and two coats of acrylic emulsion exterior grade 100 % anti-fungal paint,complete all as specified and directed.
M & L Polished granite stone slab 16 to 18mm thick coloured as in cooking platform/door sills ,horizontal and vertical surfaces set and jointed with grey cement slurry and pointed in neat white cement slurry mixed with pigment to match the shade of floors, including moulding at front edge or both edges including dismantling complete all as specified and as directed by EIC complete. Note : Quality of granite all as approved by GE
M&L coloured designer cheqeured tiling, exterior grade (ENDURA or equivalent) 15 mm thick screed bed in CM 1:6 set, jointed in floors& pointed in neat cement slurry with gray cement and pigment in floors including dismantling complete all as specified and directed.
M & L preparation of old/new plastered surfaces of any description and applying two coat of synthetic enamel paint over a coat of primer etc complete all as specified and directed by Engr-in-Charge.
M & L for preparing the old surfaces and applying one coat of cement based paints including washing , rubbing down , scrapping down, brooming down or steel wire brushing ,complete all as specified and directed
Dismentling boarding of any description, fixed in any position with nails.
Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 for concealed timber fillet etc and making good cutting not exc 10 cm girth as in wall panelling
S&F IInd class HW plain fillets square or rectangular in section clean swan secured with nails or brands section exc 13 Sqcm but n.exc 25 Sqcm secured with nails as in wall panelling.
S&F plywood grade BWP, type BB 6mm thick fixed with screws to timber frame work as in wall panelling
S&F 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed witrh screws to timber frame work in narrow widths n.exc 15 cm each rebated or flat edge as in wall panelling.
BOB ENTERPRISES
satguruenterprises
Frends Enterprises
SN CONSTRUCTION
M/s. MAYUR ENTERPRISES
Anil Industrial Corporation
IDEAL CONSTRUCTION COMPANY
ASHOK CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .