Provision of Power Supply at Runway site (29 side) for MET department at Kushinagar Airport, Kushinagar (Electrical works)

Amount

Supply of 4 x 35 sqmm size 1.1 kv grade multicore aluminium conductor XLPE insulated and PVC sheathed armoured cable as per IS:7098:1988 with upto date amendments.

Supply of 3 x 4 sqmm size 1.1 kv grade multicore copper conducotr XLPE insulated and PVC sheathed armoured cable as per IS: 7098:1988 with upto date amendments.

Supply & laying of PN-6 rated PE100 grade HDPE pipe of size 50 mm dia, for electrical and communication installation i/c excavation, upto depth of 75 cm. with trench width 35 cm, and back filling the earth with accessories complete as required.

Supply and making end termination with brass compression gland and suitable lugs for following size of PVC insulated and PVC sheated / XLPE following conductor cable of 1.1 KV grade as required. 4 X 35 sqmm, Alluminum Conductor Cable

Supply and making end termination with brass compression gland and suitable lugs for following size of PVC insulated and PVC sheated / XLPE following conductor cable of 1.1 KV grade as required. 3 X 4 sqmm, Copper Conductor Cable

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 grade upto 35 sqmm size in the existing RCC/HUME/METAL pipe as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

SITC of 2KVA capacity Online UPS with battery bank suitable for operation on 160 volt to 260 single phase 50 Hz AC input supply and constant output of 230 volt AC near sine wave having minimum 30 minute back up capacity with shortcircuit, over load & over voltage protection, battery deep discharge & overcharge protection and suitable for equipment application purposes etc. as required.

Supplying & fixing of Metal Enclosure for 2 KVA UPS along with batteries of minimum 30 minuite backups , made out of 2 mm thick CRCA sheet with locking arrangement, canopy and duly powder coated/epoxy painted with IP grade -55 etc. including making suitable PCC foundation complete as required.

SITC of suitable size power supply enclosure having angle iron mounting legs of 1.5 meter length and made out of 2 mm thick CRCA sheet double door with locking arrangement, cancopy and duly powder coated/epoxy painted, to be provided with suitable PCC foundation and having following accessories and mountings etc. as required:- (a) 20 Amps DP MCB-01 No. (Incomer) (b) 10 Amps DP MCB-01 No. (Outgoing) (c) 5 Amps DP MCB-03 No. (Outgoing) (d) Power distribution board with 05 nos. of 5 Amps 3 Pin Sockets & Switches -01 No. (Outgoing)

SITC of suitable size secondary power enclosure box made out of 2 mm thick CRCA sheet double door with locking arrangement, cancopy and power / epoxy coated painted consenting of a power distribution board with 04 nos. of 5 Amps 3 Pin Sockets & switches - 01 No.

surbhi association

jitej electrical