SUPPLY OF SPARES AND SERVICING OF CONTINUOUS AND BATCH TYPE CENTRIFUGAL MACHINE AT HBL INTEGRATED PLANT AT SUGAULI AND LAURIYA, BIHAR.

PART-A-SPARES FOR STAR TYPE COUPLING (BATCH TYPE MACHINE NG-1250)

Star Ring 14530 Polyurethane

Hex screw M 24x65 mm

SPARE FOR SUSPENSION BEARING ASSEMBLY (BATCH TYPE MACHINE NG-1250)

Adjusting nut 14429

Locking pin 14504

Stud bolt 14500

SPRAY DEVICES (BATCH TYPE MACHINE NG-1250)

Water Nozzle Assemble with 10 nos

GM Nozzle (SS)

MISC ITEMS FOR (BATCH TYPE NG-1250)

Brake liner pad set

MTC Cylinder kit kushako

SPARE FOR NK-1100 CONTINUOUS CENTRIFUGAL MACHINE

Shaft with lock nut

Sleeve

Spacer

Top angle ring

Pin (locating pin for angle ring)

SS locating pin product distributor

Bare bearing housing

HT hex head bolt for housing assebly M16x120 with nut

HT hex head screw for top cover M8x25

HT Hex head bolt M20x50

SS Socket head screw M12x30 mm for basket support

SS Socket head screw M12x35 mm for basket support

SS Socket head screw for product distributor M20x40 mm

SS Spring washer M20 for product distributor

GM Water nozzle

CI Driven pulley for 1600/1800/2000 rpm with taper lock Fenner make

CI Drive pulley for 1800 rpm with taper lock Fenner make

CI Drive pulley for 2000 rpm with taper lock Fenner make

ID 1/2" Rubber hose wire braided temp upto 150 deg both side male conector 1/2", 4000 PSI, 275 BAR

Hopper C.I V Pulley size OD:-200mm, Section - C, 5 groove, bore 50 mm key size:-15x7 mm with taper lock Fenner make

SS Hex head bolt with nut size:-12x30 mm

SS Hex head bolt with nut size:-12x40 mm

SS Hex head bolt with nut size:-12x50 mm

Description of Work / Item(s)

PART-B-LAURIYA-SPARES FOR CONTINUOUS CENTRIFUGAL MACHINE NK 1100

Shaft

Bare Bearing Housing

Distributor

V-Seal (Alt-1)

V-Seal (Alt-2)

Buffer Pad

Lock Nut (KM15)

Lock Washer (MB15)

Copper Lock Washer

Motor Pulley suitable for 2000 RPM for NK 1100

Rubber Hose pipe(1/4 inch x 1mtr)

Rubber Hose pipe(1/2 inch x 1mtr)

Rubber Hose pipe(1/2 inch x 2mtr)

SPARES FOR BATCH TYPE CENTRIFUGAL MACHINE NG 1250

Rubber Buffer

Rubber Star

Plough up/down seal kit

Plough in/out seal kit

MTC Cylinder

Taper wedge

SERVICES FOR CONTINUOUS CENTRIFUGAL MACHINE NK 1100

Repairing of NK 1100 Centrifugal machine Basket with Bottom lapping and acceleration cup proper machining with Dynamic Balancing.

VIJAY PANDURANG PATANGE (BID ID -856788)

INDUSTRIAL ENGINEERING WORKS (BID ID -856950)

VIJAY PANDURANG PATANGE (BID ID -856788)

INDUSTRIAL ENGINEERING WORKS (BID ID -856950)