REPAIR/ REPLACEMENT OF JOINERY, ROOF SHEET, FALSE CEILING, WALL PANELLING FLOORING AND MASONRY WORK ETC IN CERTAIN BLDGS OF OTM ACCN AT JUTOGH CANTT UNDER GE JUTOGH

Amount

Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises complete all as specified and directed.

Demolition of cement concrete in ground floors or pavings n.exc 15cm thickness below or above ground level complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for rendering/screed bed 15mm thick in CM 1:3 in (Sunken slab) mixed with water proofing compound as per manufacturer instruction's surface shall be finished even and smooth without extra cement complete all as specified and directed. Note: Water proofing compound will be measured and paid separately.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm icluding cleaning surfaces etc complete as in sunken portion complete all as specified and directed.

M & L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in filling and mass concrete complete all as specified and directed.

M&L 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in subbase of flooring complete all as specified and directed.

M &L 75mm thick for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in sub base , plinth protection & paving finished even & smooth without using extra cement.

M & L for chequered cement concrete tiles rubber moulded pre polished with lacquar finish pre polished glossy finish 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors laid over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in sub base for laying floors finishes complete all as specified and directed.

M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for glazed ceramic tiles joint free in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm, 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and incl 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.18 sqm but n exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) joint free area of each tiles exceeding 0.18 sqm but n exc 0.38 sqm in verical surface such as dado/lkirting set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and incl 10mm thick rendering in cment mortar 1:4 complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shade (square / rectangular) of 8 to 9mm thick, double charged/ Ultra charged, of size 600x600mm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles fixed over and incl rendering 15mm thick in CM (1:6) complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shade (square / rectangular) of 8 to 9mm thick, double charged/ Ultra charged, of size 600x600mm as in skirting, dado and riser to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles fixed over and incl rendering 10mm thick in CM (1:4) complete all as specified and directed.

Demolition of stone slabs and tiles of any description laid beded and pointed in any mortar or thickness in floors, aprons etc. complete all as specified and directed.

M & L for granite (of any type) 18-20 mm thick table rubbed and polished in steps, jambs, pillars, window Cills, and top of kitchen platform and top of counter top wash basin etc set and jointed in neat cement slurry and pointed with coloured cement to match fixed over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in , cooking platform, and other similar situations complete all as specified and directed.

S & F 1.5mm thick PVC tiles/sheets, laminated plain coloured, marbled mosaic or mottled finish, homogeneious laid with approved rubber based adhesive in floors (incl dismantling of old PVC sheet from floor and removing from site) complete all as specified and directed.

Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition)of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for RCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in chajja repairs at any height including providing and erecting at site conventional steel double scaffolding to reach at any height/any place of work on the external façade of the building including approaches, extensions, working platforms, ladders, lifting tackle for men and amterials etc all complete, inclusive of covering by hessian cloth or tarpaulins, dismantling and taking away all materials after the completion of praposed work etc complete all as specified and directed.

M&L for formwork to flat rough finished surface of concrete for chullah hoods, chajjas, troughs and similar items including edges any height complete all as specified and directed.

M & L for RCC 1:2:4. type B-1, using 20mm graded crushed stone aggregate as in columns/beams/slab, landings, chajja and in shelves and the like complete all as specified and directed.

M&L for formwork flat rough finished surfaces of concrete to soffits of suspended slabs, roof slabs, landings and similar work complete all as specified and directed.

M&L for form work to edges of concrete flats, treads, breaks in floor & roofs, concrete railings, n.exc 20 cm wide horizontal or sloping and similar works exc 5cm but n.exc 10 cm wide, rough finished surfaces of concrete complete all as specified and directed.

S&F TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc, of any height (Ground floor to 3rd floor) including necessary scaffolding and T&P required complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:6) on brick work or concrete surfaces finished even and smooth complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surface of wall in cement mortar 1:4 finish surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a one coat of birla white putty 1-2mm thick on walls complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces at any height of building / tower complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets or GI grid frame work complete all as specified and directed.

M & L for 4mm thick non asbestos fibre cement building boards (self designer with PVC white coating) fixed or laid/ inserted to timber/GI/ Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

M&L for GI frame work (bottom prepainted and puetyelene coated) of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

M&L for hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height complete all as specified and directed.

M & L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan to any radius in half brick thick wall built complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed.

S & F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap fixed with self-tapping screw and washers in roofs with grade of Zinc coating 120 gm per sqm complete all as specified and directed.

S&F 0.63mm thick, plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings and facia board ornamental type (length and girth as fixed) with grade of Zinc coating 120 gm per sqm, bent in shape as required, fixed with self-tapping/ coach screw and washers in roofs and wall etc., complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

Dismantling timber scantlings ,framed/unframed work of size 40 sqcm and over in section ,in any position in any position with nails etc complete all as specified and directed.

S & F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam,tee, anfle, channel or flat sections) including distance pieces cleats Fe 410-W(Gde-E- 250) quality-A etc complete all as specified and directed.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, framework of watertanks and similar work conforming to Fe-290. Gde-E-165. complete all as specified and directed.

M & L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and as directed.

S & F sheet glass ordinary quality 4mm thick glazing in square/ rectangle n,exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden frame at any height including necessary scaffolding etc. complete all as specified and directed.

S & F figured glass ordinary quality 4mm thick glazing in square/ rectangle n,exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden frame at any height including necessary scaffolding etc. complete all as specified and directed.

Taking down chowkat or frames with shutters withoutout taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm each and n exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and refixing in the same opening after repairs complete all as specified and directed.

M&L for IInd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M&L for framed work as in doors frame/chowkats or gates of angle or other section with gusset plates , rails , braces etc complete drilled for fixing of steel sheeting etc of Fe 410 -W (Gde- E- 250) quality-A, complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with MS handles, MS peg stay with glazing bars, complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with MS handles, MS peg stay without glazing bars, complete all as specified and directed.

S&F factory made steel ventilator with top hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars complete all as specified and directed.

S&F 2nd class hard wood factory made paneled shutters 30mm thick (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S & F glazed and skeleton shutters 35mm thick 2nd class Hard wood open rebated and prepared to receive glass, gauge etc. edges of framaing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sized of members of shutter with three number of pannels complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and directed.

Dismantling timber scantlings framed work in fillets, frame work of cup board, rails, posts rafters, purlins, etc under 40 sq cm in section in any position with nails etc complete all as specified.

M&L for plain fillets of second class hard wood, square or rectangular in section, clean sawn, secured with nails or brads; sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm including repairs or if refixed in old position complete all as specified and directed.

Dismantling boarding any description, fixed in any position with nails for cupboards complete all as specified and directed.

M & L for 4mm thick non asbestos fibre cement building boards (self designer with PVC white coating) fixed or laid/ inserted to timber/GI/ Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

M&L for preparation of new wooden surfaces not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long complete all as specified and directed.

S & F 300mm Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size complete all as specified and directed.

S&F butt hinges 75mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed, type C-21 complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long complete all as specified and directed.

S & F in repairs floor door stoppers 140mm of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floors, complete all as specified and directed.

Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed.

Taking up or down 20 bore, steel water tubing & connections complete all as specified and directed.

Refixing old steel tubing 15mm dia and connections in new or old position (walls, ceiling, floors etc.) incl new fittings complete all as specified and directed.

Refixing old steel tubing 20mm dia and connections in new or old position (walls, ceiling, floors etc.) incl new fittings complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve and dismantling of existing tank complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve and dismantling of existing tank complete all as specified and directed.

S&F in repair 20mm ball valves high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screw for iron pipe mini weight for 210 gms complete all as specified and directed.

S & F 21-22 inch dia galvanised mild steel pan mortar (Tasla/ghamela) not less than 1mm thick with for 04 Nos bolt of 5-6mm dia with 8 Nos nut bolt with 8 Nos washer including fixing on water storage tank as tank cover complete all as specified and directed.

M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 250 Ltr and nexc. 500 ltr complete all as specified and directed. Note : Any damage to FV, pipe etc shall be make good by the contractor.

M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 500 Ltr and nexc. 1000 ltr complete all as specified and directed. Note : Any damage to FV, pipe etc shall be make good by the contractor.

S&F in repair 20mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for Iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm dia angle/stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, complete all as specified and directed.

S & F in repair 15mm bore concealed stop valve fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for unions pipe complete all as specified and directed.

S & F in repair 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule complete.

S & F in repair 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type complete all as specified and directed.

S & F in repair 15mm brass CP wall mixer for mixing hot and cold water with hand shower complete all as specified and directed.

S & F in repair 15mm brass CP wash hand basin/ kitchen sink mixer for mixing hot and cold water complete all as specified and directed.

S & F in repair of 60 cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repair CP brass jet spray (health faucet) with flexible pipe 1.50m long fixedto EWC suitable for 15mm bore of pipe complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S& F 15mm size PVC connection pipe with PTMT nuts of length 600mm long complete all as specified and directed.

S& F in repairs 32mm dia PVC waste pipe for wash hand basin and kitchen sink of length 900mm long with PTMT nuts complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan padestal pattern white with complete fitting including P/S Trap and fixing with brass screw complete all as specified and directed.

S & F plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest including trap set and including concrete complete including making good to floor etc(excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 Ltr capacity valveless symphonic action type white as approved with ball valve flat back & handle including brackets complete all as specified and directed.

S&F in repairs Wash basins, vitreou china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length complete all as specified and directed.

S&F vitreous china half stall urinal white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

M&L 20 mm dia mild steel coloured PVC coated fancy curtain rod complete all as specified and directed.

M&L for mild steel coloured brackets including PVC designer dom for curtain rod complete all as specified and directed.

S & F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastecoupling/waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F for PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm dia provided with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm dia provided with access door complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position of cap exc. 250 Ltr nexc. 500 ltr complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in pdding to roof to maintain the required slope and finshed the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces finished even and smooth without using extra cement mixed with and incl water proofing compound of approved make as per manufacturers instructions complete all as specified and directed.

M&L for roof treatment by cleaning of roof slab surfaces including sweeping clean and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under : (a) M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @ 0.30 Ltr/sqm (b) Applying one coat of bitumen 85/25 grade @1.2 kg/sqm (c) Supplying and laying modified polymeric water proofing membrane super thermo 3mm thick of weight not less than 3kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required. (d) Applying two coats of aluminium paint @ 0.20 kg/Sqm

M&L for bitumen flash strip 100MM width, 10mtr long for repairs of roof sheet (any type) leakage in patch work and applying, complete all as specified and as directed.

M&L for polymeric water proofing membrane (1x10mtr) super thermo lay 3mm thick of weight not less than 3kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including for repairs of roof sheet (any type) leakage in patch work and applying, complete all as specified and directed.

M/S Shiv Kumar

Pankaj Builders