REPAIR TO FENCING FOOTHPATH GATE SECURITY WALL AND DRAIN AT JANGLOTE UNDER GE BASOLI

Amount

Material and labour for Rendering 15mm thick in cement mortar 1:4 finished even and smooth without using extra cement including preparation of new plastred surfaces and applying two coats of cement base paint on walls over a coat of primer and taking down cement plaster any description complete all as specified and directed.

Material and labour for 75mm thick cement concrete type D-2, 1:4:8 using 40 mm graded stone aggregate as in sub base and mass concrete complete all as specified and directed.

Material and labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness ,M-35 Grade with grey cement and no pigment. complete all as specified and directed .

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed .

Material and labour for walling of random rubble masonary, uncoursed well bonded, bedded and solidly hearted built in CM 1:6. complete all as specified and directed .

All as per srl item No.6 above, but except stone. complete all as specified and directed .

Material and labour for Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 . complete all as specified and directed .

All as per Srl Item No 8 above but except bricks.

Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4. Complete all as specified and directed

All as per Item No 10 above but except bricks.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

Material and labour for Rendering 15mm thick in cement mortar 1:6 and finished even and smooth without using extra cement including preparation of newly plastered or unplastered surfaces and applying two coats of white wash complete all as specified and directed

Material and labour for Raised pointing to randum rubble sto ne walling in cement mortar 1:3 complete all as specified and directed

Material and labour for Plain Cement Concrete Type C2 ,1:3:6 (using 40 mm graded stone aggregate) in surface channels and drains including Demolition of un-reinforced cement concrete in ground floors and pavings n exc. 15 cm thickness (below or above ground level). complete all as specified and directed .

Material and labour for PCC 1:2:4 type B-0 (12.50 mm graded stone aggregate) as in coping,plinth band ,bed block including rounded or chamfered angle as directed including necessary formwork including demolition of un-reinforced cement concrete in ground floors and pavings n exc. 15 cm thickness (below or above ground level). complete all as specified and directed .

Material and labour for precast cement concrete Type B-1,1:2:4 (20 mm graded stone aggregate ) set in cement mortar 1:4 as in manhole covers including demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for. complete all as specified and directed .

Material and labour for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including, cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Dismantling post or struts (wood,steel or RCC) any section including taking out embedded portion embedded in Concrete, brick work, masonry, etc. to receive new fencing post/strut complete all as specified & directed.Note: New post or strut shall be measured and paid separately.

Material and labour for cement concrete type C-2, 1:3:6 using 40 mm graded stone aggregated as in sub base and mass concrete complete all as specified and directed.

Supply and fix for Posts and struts of MS angle iron in fencing including cutting tops to shape as directed, drilling hole, notching for wire etc flat iron fillets (for securing wire mesh)) including all necessary drilling bolting or riveting etc. complete all as specified and directed.

Material and labour for preparation of steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of old steel and iron surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply and fix for mild steel galvanised chain link of mesh size 50mmx 50mm and thickness of line wire 3.80mm dia including fixing with straining bolt ,binding wire etc including dismantling fencing wire mesh, any type. complete all as specified and directed .

Supply and fix for MS round bars 12mm dia for strengthening of chain link, screw bolts with hexagonal or square heads at one end and screwed the other end or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 5cm and n.exc 10 cm and dia meter of neck 16 to 20mm. complete all as specified and directed.

Supply and fix for Bands, straps,supports or stays for rainwater, ventilating pipes, including bolts, if required hooks,heavy, for large gates, hook and pintle hinges; large hasps and staples chains;hand made sliding bolts; clamps; hold fasts; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165. complete all as specified and directed .

Supply and fix mild steel screw bolts(Machine made) with hexagonal or square heads at one end and screwed the other or both end each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 5cm but not exc 10cm complete all as specified and directed.

Material and labour for preparation of steel and iron surfaces not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material and labour for Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and no pigment over and including 15mm thick screed bed of cement mortar in 1:4 for receiving cement concrete tiles and including 75mm thick plain cement concrete type D-2 1:4:8 (40mm graded stone agg) complete all as specified and directed .

Dismantling of fencing wire mesh any type, complete all as specified and directed.

Supply and fix in repair galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured), complete all as specified and directed.

M/S YASH PAUL RAINA AND CO

Standard engineers

S S CONSTRUCTION