SPL REPAIR/ REPLACEMENT OF CERTAIN EQPTS OF LAUNDRY PLANT AGAINST BER AT CH (NC) UNDER GE (UTILITIES) UDHAMPUR

Amount

Supply, install, testing and commissioning industrial Electrically heated, washer extractor, computer controlled, front loading, open pocket, heavy duty high spin top suspension with hydraulic cushions full stainless steel cabinet microprocessed controlled with 5 compartment automatic soap dispenser, stainless steel die pressed front, stainless steel inner cyclinder, outer drum, loading door front sides, top and back all in ss, inner basket has 3 lifter design, single motor with variable frequency inverter drive for various speeds for wash, distribution low normal and high spin. Tuned suspension for vibration less performances. Fully programmable microprocessor, control upto 30 customized of preset process. Step- by-step led instructions for cycle advance, variable lime single process modification and diagnostic checks, 60 kg capacity complete all as specified and directed. Make- Electrolux / Supershine / Samsung Bosch / LG & Stefab

Foundation:- PCC foundation for plant shall be all as per manufacturer's instructions / recommendations or required at site or as directed by Engr-in-Charge. Cost of the same shall be deemed to be included in the lump sum cost of plant quoted by contractor in above item.

Supply, install, testing and commissioning industrial Electrically heated, washer extractor computer controlled, front loading, open pocket, heavy duty high spin top suspension with hydraulic cushions full stainless steel cabinet microprocessed controlled with 5 compartment automatic soap dispenser, stainless steel die pressed front, stainless steel inner cyclinder, outer drum, loading door front sides, top and back all in ss, inner basket has 3 lifter design, single motor with variable frequency inverter drive for various speeds for wash, distribution, low normal and high spin. Tuned suspension for vibration less performances. Fully programmable microprocessor control upto 30 customized of preset process. Step-by-step led instructions for cycle advance, variable time single process modification and diagnostic checks, 30 kg capacity complete all as specified and directed. Make- Electrolux / Supershine / Samsung Bosch / LG & Stefab

Foundation:- PCC foundation for plant shall be all as per manufacturer's instructions / recommendations or as required at site or as directed by Engr-in-Charge. Cost of the same shall be deemed to be included in the lump sum cost of plant quoted by contractor in above item.

Disconnecting all electrical connections of existing Washing machine and shifting / transporting the same to MES Store yard complete all as specified and directed.

M & L for Sub main wiring with 4 Run of 10.00 Sqmm cable and one run of 6.00 Sqmm PVC insulated, unsheathed FR cable of multi - stranded copper conductors 1100 volt grade IS - 694 marked drawn through and including non - metallic PVC conduit pipe medium grade ISI marked ( not less than 20 mm dia ) along with all fittings and accessories concealed on wall and surface on ceiling complete all as specified and directed by the Engineer-in-Charge.

S & F in replacement of MCB distribution board single pole and neutral 4 way factory made sheet steel, phosphates, powder painted with 200 Amps rated busbar, 240 volts, neutral link, earth bar and Din rail double door complete including taking down / dismantling of old unserviceable one complete all as specified and directed.

Supply and fixing in replacement 240V, 10 KA C curve miniature circuit breaker ( MCB ) of TPN and current carrying capacity 63 AMP, in the MCB DB Complete with connection all as specified and as directed by Engr-in-Charge.

M & L for Earthing complete with GI earth plate electrode 60cmx60cmx3.15mm thick, buried directly in ground ( earth pit not less than 2.25 meters deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level connected to and including using GI strip 32x6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth plate surrounded by packed layer of charcoal dust and common salt, 15cm thick all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel, wire mesh and 40 mm dia Gl protection pipe light grade all as shown in electrical plate No 3 of SSR Part - I and connected to earthing test point, main switch board and testing on completion including excavation, earth work concrete pit with 80mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 8mm dia @ 150C / C both ways and pit chamber in PCC 1:2:4 type B - 1 with 2 Nos suitable lifting handles of 12mm MS bar complete all as specified and directed.

Electromech Engineers