Repair to all type of wooden furniture at Air Force Station Jaisalmer under GE (AF) Jaisalmer.

Amount

Repair to Chair Dining (Drg No: FD-279)

M&L for removing of old broken components of chair dinning and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in the drawing.

Rear leg as specified in the drawing.

Stiffener as specified in the drawing.

Front/Side/Rear rails of seat including drilling of holes for caning as specified in drawing

Back support as specified in the drawing.

Hard PVC shoe with screw & washer complete all as specified.

M&L for taking out old unserviceable cane from chairs dining and recaning of chair dining with 2mm wide white new/fresh plastic cane (oval shape) and caning border with 4mm wide caning as per Godrej pattern complete all as specified and as shown in the drawing. Make of cane : Shah & Shah/MPT Premier/Indian Plastic

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to the required gloss and strictly through spray gun to old or new surface of chair dining and as directed by Engineer-in-Charge

Repair to Chair Easy (Drg No. : FD-229)

M&L for removing of old broken components of chair easy and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in the drawing.

Rear leg as specified in the drawing.

Seat frame as specified in the drawing.

Frant/back rail as specified in the drawing.

Arms as specified in the drawing.

Back frame/support as specified in the drawing.

Hard PVC shoe with screw & washer complete all as specified.

M&L for taking out old unserviceable cane from chair easy and recaning of chair easy with 2mm wide white new/fresh plastic cane (oval shape) and caning border with 4mm wide caning as per Godrej pattern complete all as specified and as shown in the drawing. Make of cane : Shah & Shah/MPT Premier/Indian Plastic

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to the required gloss and strictly through spray gun to old or new surface of chair easy and as directed by Engineer-in-Charge

Repair to Chair Writing (Drg No. FD-280)

M&L for removing of old broken components of chair writing and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in the drawing.

Rear leg as specified in the drawing.

Stiffener as specified in the drawing.

Front/back/side rail as specified in the drawing.

Arms as specified in the drawing.

Back support as specified in the drawing.

Hard PVC shoe with screw & washer complete all as specified.

M&L for taking out old unserviceable cane from chairs writing and recaning of chair writing with 2mm wide white new/fresh plastic cane (oval shape) and caning border with 4mm wide caning as per Godrej pattern complete all as specified and as shown in the drawing. Make of cane : Shah & Shah/MPT Premier/Indian Plastic

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to the required gloss and strictly through spray gun to old or new surface of chair writing and as directed by Engineer-in-Charge

Repair to Bed ply top (Drg No: FD-246 & 247)

M&L for taking down old unserviceable ply from bed ply top and S&F new bed ply 12mm thick 1980x900mm size (BWR) grade type 'BB' complete all as specified and shown in drawings. Make : Green Ply/Kit Ply/Century Ply.

M&L for taking down old unserviceable long rails of bed ply top and S&F new long rail of size 1980x90x35mm of 1st class seasoned teak wood free from knots and cracks with permissible moisture content complete all as specified and as shown in drawings.

All as per serial item No 4.02 above but short rail of size 900x60x60mm size complete all as specified and as shown in drawings.

All as per serial item No. 4.02 above but stiffener of size 900x60x40mm size complete all as specified and as shown in drawings

All as per serial item No. 4.02 above but leg as per existing size and as shown in drawings.

M&L for taking out old unserviceable ply both side from head board of bed/bed ply top and S&F new 4mm thick one side teak face ply shall be used both side of the head board and 4mm thick teak wood beading all around, all as specified and shown in drawings.

All as per serial item No. 4.06 above but foot board as shown in drawings.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to bed plywood top to the required gloss and strictly through spray gun to old or new surface of bed plywood top and as directed by Engineer-in-Charge.

Repair to Chair dining W/B (Drg No: FD-228)

M&L for removing of old broken components of chair dining (W/B) and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in the drawing.

Rear leg as specified in the drawing.

Stiffener as specified in the drawing.

Front/back/side rail as specified in the drawing.

Seat ply 6mm thick commercial BWR grade ply as specified in the drawing. Make : Green ply / Kit ply / Century ply.

Back support as specified in the drawing.

Hard PVC shoe with screw & washer complete all as specified.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to the required gloss and strictly through spray gun to old or new surface of chair dining W/B and as directed by Engineer-in-Charge

TABLE DINNING 6/8 PERSONS (Drg No: FD-273)

M&L for taking out old unserviceable top and S&F new top of table dining made 18/19mm thick pre-laminated particle board, exterior grade, conforming to IS-3087-1985, bonded with Phenol formaldehyde with one side teak colour and other side white of size 1500x900mm (6 Persons) and including 6mm thick teak wood edging all around complete all as specified and as shown on drawings. Make : Novapan/ECO Board/Bhutan Board.

All as per serial item No. 6.01 above but top of size 1800x900mm (8 Persons)

M&L for taking down old unserviceable legs and S&F new legs of size 740x40x75mm made of 1st class hard wood teak free from knots, cracks etc with permissible moisture contents complete all as specified and as shown in the drawing.

All as per serial item No. 6.03 above but top long rail of size 1470x25x 100mm or 1700X25X100mm complete all as specified.

All as per serial item No. 6.03 above but short rail 900x25x100mm.

S&F Konia (wooden bracket) size 90x90mm, 30mm thick made of 1st class hard wood teak between leg and short/long rail of the table fixed with screw to provide more strength complete all as specified and directed.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to the required gloss and strictly through spray gun to old or new surface of table dining 6/8 Persons and as directed by Engineer-in-Charge

SIDE BOARD ( Drg No : FD-241)

M&L for taking down old unserviceable legs and S&F new legs of size 50x50x125mm made of 1st class hard wood Teak well seasoned free from knots, cracks etc with permissible moisture content, complete all as specified and as shown in the drawing.

All as per serial item No 7.01 above but bottom frame of size 1060x360 x45mm and 25mm thick complete all as specified and as shown in the drawing.

M&L for taking down old unserviceable bottom of drawers and S&F new bottom of drawer made of 9mm thick ply commercial with size and shape as existing complete all as specified and as shown in the drawing. Make : Greenply/Kitply/Centuryply.

M&L for taking down old unserviceable partition and S&F new partition made 18/19mm thick pre-laminated particle board, exterior grade, conforming to IS-3087-1985, bonded with Phenol formaldehyde, with one side teak colour and other side white, size 600x450mm complete all as specified and as shown in drg. Make : Novapan/ECO Board/Bhutan Board.

All as per serial item No. 7.04 above but top or bottom of size 1220x455mm.

All as per serial item No. 7.04 above but shelf size 425x780mm.

M&L for taking down old unserviceable back ply and S&F new ply of size 1220x635mmx6mm thick commercial BWR grade, complete all as specified and as shown in the drawing. Make : Greenply/Kitply/Centuryply.

M&L for taking down old unserviceabl knob and S&F new knob 40mm dia, brass chromium plated complete all as specified and as shown in the drawing.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to side board to the required gloss and strictly through spray gun to old or new surface of side board and as directed by Engineer-in-Charge

TABLE PEG (Drg No: FD-277)

M&L for removing of old broken components of table peg and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Leg as specified in the drawing.

Top rail as specified in the drawing.

Bottom rail as specified in the drawing.

M&L for taking out old unserviceable top and S&F new Top made 18/19mm thick, pre laminated particle board, exterior grade conforming to IS-3087-1985 with size and shape as per existing with one side teak face and other balancing white duly covered with 4mm thick teak wood beading all around, the top fixed with screws complete as shown in the drawing. Make : Novapan/ ECO Board/ Bhutan Board.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to table peg to the required gloss and strictly through spray gun to old or new surface of table peg and as directed by Engineer-in-Charge

STOOL DRESSING CB (Drg No: FD-282)

M&L for removing of old broken components of stool dressing CB and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Leg as specified in the drawing.

Top long rail as specified in the drawing.

Top Short rail as specified in the drawing.

Center stiffener as specified in the drawing.

Side stiffener as specified in the drawing.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to stool dressing CB to the required gloss and strictly through spray gun to old or new surface of stool dressing CB and as directed by Engineer-in-Charge

M&L for taking out old unserviceable cane from stool dressing CB and recaning of stool dressing CB with 2mm wide white new/fresh plastic cane (oval shape) and caning border with 4mm wide caning as per Godrej pattern complete all as specified and as shown in the drawing. Make of cane : Shah & Shah/MPT Premier/Indian Plastic

TABLE 900X600X760MM WITH DRAWERS (Drg No: FD-283)

M&L for removing of old broken components of table with drawers 900x600x760mm and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Leg as specified in the drawing.

Top long rail as specified in the drawing.

Top short rail as specified in the drawing.

Bottom rail as specified in the drawing.

Track rails for drawers as specified in the drawing.

Side stiffener for drawers as specified in the drawing.

12mm thick sides & back and 20mm thick front of drawer made of hard wood teak, 6mm thick bottom of commercial ply for drawer, with size & shape as per existing complete all as specified and as shown in the drawing. Make : Green ply / Kit ply / Century ply.

M&L for taking out old unserviceable top and S&F new Top of table of size 900x600mm made 18/19 mm thick prelaminated particle board, exterior grade conforming to IS-3087-1985, bonded with Phenol formaldehyde, with one side teak colour and other side white, including 4mm thick teak wood edging all around complete all as specified and as shown in the drawing. Make : Novapan/ECO Board/Bhutan Board.

S&F Konia (wooden bracket) of size 90x90mm, 30mm thick made of 1st class hard wood teak in between leg and short/long rail of the table fixed with screw to provide more strength complete all as specified and all as directed.

M&L for taking down old unserviceable knob and S&F new knob of brass chromium plated of size 40mm complete all as specified and as shown in the drawing.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to table 900x600x760mm with drawers to the required gloss and strictly through spray gun to old or new surface of table with drawers and as directed by Engineer-in-Charge

TEA POY (Drg No: FD-278)

M&L for removing of old broken components of tea poy and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Leg as specified in the drawing.

Top rail as specified in the drawing.

Bottom rail as specified in the drawing..

M&L for taking out old unserviceable top and S&F new top of size 600x450mm, made 18/19mm thick pre-laminated particle board, exterior grade conforming to IS-3087-1985, bonded with phenol formaldehyde, with one side laminated with texture and bleaching white or cream colour on the other side and including 4mm thick teak wood beading all around the top complete all as specified and as shown in the drawing. Make : Novapan/ECO Board/Bhutan Board.

S&F Konia (wooden Bracket) of size 90x90mm, 30 mm thick made of Ist class hard wood teak in between leg and short/long rail of the table fixed with screw to provide more strength complete all as specified and directed.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to teapoy to the required gloss and strictly through spray gun to old or new surface of teapoy and as directed by Engineer-in-Charge

TABLE CENTRE (Drg No: FD-274)

M&L for removing of old broken components of table centre and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Leg as specified in the drawing.

Top Long rail as specified in the drawing.

Bottom Short rail as specified in the drawing.

Short Stiffener as specified in the drawing.

Long Stiffener as specified in the drawing.

M&L for taking out old unserviceable top and S&F new top size 900x450 mm, 18/19mm thick, pre-laminated particle board, exterior grade conforming to IS-3087-1985, bonded with Phenol formaldehyde with one side laminated with texture and bleaching white or cream colour on the other side and including 4mm thick teak wood beading all around the top complete all as specified and as shown in the drawing. Make : Novapan/ECO Board/Bhutan Board.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to table centre to the required gloss and strictly through spray gun to old or new surface of table centre and as directed by Engineer-in-Charge

TABLE WRITING (Drg No: FD-275)

M&L for removing of old broken components of table writing and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Leg as specified in the drawing.

Top short rail as specified in the drawing.

Top long rail as specified in the drawing.

Stiffener as specified in the drawing.

Bottom rail as specified in the drawing.

Shutter as specified in the drawing.

M&L for taking down old unserviceable bottom of drawer and S&F new bottom of drawer made 6mm thick ply BWR grade, shape & size as existing complete all as specified and as shown in the drawing.

All as per serial item No. 13.08 above but front of drawer made of 19mm thick particle board.

All as per serial item No. 13.08 above but sides/back of drawers made of 12mm thick 1st class hard wood teak.

M&L for taking out old unserviceable or damaged back of box and S&F new 6mm thick back plywood BWR grade as per existing size & shape complete all as specified as shown in the drawing.

M&L for taking out old unserviceable top and S&F new top of table made of 18/19mm thick prelaminated particle board, exterior grade conforming to IS-3087-1985 with size 1145mm x 600mm and with one side teak colour and other side white duly covered including 4mm thick teak wood beading all around complete all as specified and as shown in drawing. Make : Novapan/ECO Board/Bhutan Board.

Taking down old unserviceable knob and S&F new knob made of brass chromium plated of size 40mm complete all as shown in drawing.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to table writing to the required gloss and strictly through spray gun to old or new surface of table writing and as directed by Engineer-in-Charge

TABLE BED SIDE (Drg No: FD-276)

M&L for taking out old unserviceable top and S&F new top of table bed side made of 18/19mm thick prelaminated particle board, exterior grade conforming to IS-3087-1985 with size 450mm x 230mm and with one side teak colour and other side white duly covered including 4mm thick teak wood beading all around complete all as specified and as shown in drawing. Make : Novapan/ECO Board/Bhutan Board.

All as per serial item No. 14.01 above but side of size 510x230mm.

All as per serial item No. 14.01 above but shelves/bottom of size 414x210mm.

M&L for taking out old damaged unserviceable back and S&F new back made 6mm thick ply wood BWR commercial grade, shape & size as existing complete all as specified and as shown in drawing. Make : Greenply / Kit ply / Centuryply.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to table bed side to the required gloss and strictly through spray gun to old or new surface of table bed side and as directed by Engineer-in-Charge

TABLE DRESSING GENTS WITH MIRROR (Drg No: FD-230)

M&L for taking out old unserviceable mirror with frame and S&F new looking mirror size 380x760mm, 5mm thick duly framed with 1st class hard wood teak and back of mirror shall be 6mm thick BWR ply wood, conforming to IS-303 and including 2 Nos-3mm thick MS plate to be fixed on top end of back for hanging of mirror complete all as specified and as shown in drawing. Make of Mirror : ATUL/MODI Guard /SG.

M&L for taking down old unserviceable front of drawer and S&F new front made of 12mm thick prelaminated particle board, exterior grade conforming to IS-3087-1985 as per existing size complete all as specified and as shown in drawing. Make : Novapan/ECO Board/Bhutan Board.

M&L for taking down old unserviceable sides/back of drawer and S&F new sides made 12mm thick Ply wood BWR grade, conforming to IS-303, size & shape as existing complete all as specified and as shown in drawings. Make : Greenply / Kit ply / Centuryply.

M&L for taking down old unserviceable bottom ply and S&F new 6mm thick commercial ply wood BWR grade, conforming to IS-303 with size & shape as existing complete all as specified and as shown in drawings. Make : Greenply / Kit ply / Centuryply.

M&L for taking out old damaged unserviceable top/bottom and S&F new top/bottom of table dressing gents with mirror made 12mm thick prelaminated particle board, exterior grade, one side teak face and other side white balancing of size 900x300mm complete all as specified and as shown in drawing. Make : Novapan/ECO Board/Bhutan Board.

All as per serial item No. 15.05 above but 12mm thick back of table of size 900x160mm made of 1st class hard wood.

All as per serial item No. 15.05 above but 12mm thick sides of table of size 300x160mm made of 1st class hard wood.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to table dressing gents with mirror to the required gloss and strictly through spray gun to old or new surface of table dressing gents with mirror and as directed by Engineer-in-Charge

BIN SOILED LINEN (Drg No: FD-244)

M&L for taking down old unserviceable legs and S&F new leg of size 45x45x100 mm, made of 1st class teak wood, well seasoned, free from knots,cracks etc., with permissible moisture content throughout, of shape and size as existing complete all as specified and as shown on drawings.

All as per serial item No. 16.01 above but side stiffener.

M&L for taking down old unserviceable side ply 6mm thick and S&F new side ply 6mm thick teak, veneered, one side teak face, ISI marked, conforming to IS-303 and size 330x750mm as shown in drawings.

M&L for taking down old unserviceable top and S&F new top made 6mm thick ply wood teak, veneered, one side teak face, ISI marked, conforming to IS-303 and of size 450x750mm as shown in drawings.

M&L for taking down old unserviceable bottom of bin soiled linen and S&F 12mm thick new bottom made of 1st class hard wood teak, all as specified and as shown in drawings.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to bin soiled linen to the required gloss and strictly through spray gun to old or new surface of bin soiled linen and as directed by Engineer-in-Charge

TABLE DRESSING LADIES WITH MIRROR (Drg No: FD-251)

M&L for taking out existing old unserviceable foggi fadded looking mirror size 366x1220mm, 5mm thick with frame and S&F new looking mirror of same size and shape, duly complete framed with 1st class seasoned teak wood and back of mirror shall be 6mm thick plywood conforming to IS-303 complete and all as spceified and shown in drawings.

M&L for removal of broken glass panel and S&F new glass pane size 5mm thick, duly slotted glass for sliding purpose complete all as specified and shown in drawings.

M&L for taking down old unserviceable legs and S&F new leg with 1st class seasoned teak wood free from knots,cracks etc., with permissible moisture content and of shape and size as per existing complete all as specified on drawings.

M&L for taking down old unserviceable front of drawer and S&F new front of drawer 18/19mm thick prelaminated particle board, exterior grade conforming to IS-3087-1985, as per required size & shape, complete all as specified and shown in drawings.

All as per serial item No. 17.04 above but 12mm thick sides of drawer made of 1st class hard wood teak.

All as per serial item No. 17.04 above but 12mm thick back of drawer made of 1st class hard wood teak.

M&L for taking down old unserviceable bottom of drawer and S&F new bottom of drawer of 6mm ply wood, BWR grade, ISI Marked, conforming to IS-303 and as per required size, compelete all as specified and shown in drawings.

M&L for taking out old damaged unserviceable top and S&F new top of table dressing made of 18/19mm thick prelaminated particle board, exterior grade, one side teak face and other side white balancing of size 900x380mm inclduing 3mm thick teakwood beading all around complete all as specified and as shown in drawing. Make : Novapan/ECO Board/Bhutan Board.

All as per serial item No. 17.08 above but 18/19mm thick bottom of table dressing ladies made of commercial ply wood.

All as per serial item No. 17.08 above but 18/19mm thick sides of table dressing ladies made of commercial ply wood.

All as per serial item No. 17.08 above but 12mm thick back of table dressing ladies made of commercial ply wood.

M&L for taking down old unserviceable bottom frame and S&F new frame with legs with 1st class, seasoned teak wood, free from knots, cracks etc, with permissible moisture content and of shape and size as existing complete all as specified and shown in drawing.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to table dressing ladies with mirror to the required gloss and strictly through spray gun to old or new surface of table dressing ladies with mirror and as directed by Engineer-in-Charge

HAT STAND WITH MIRROR (FD-233/362)

M&L for taking down old unserviceable frame and S&F new frame of size 710x1000mm with 4mm thick teak face ply in front side and shall be covered with 4mm thick commercial ply on back side including 35x6mm thick beading all around & 2 Nos hanging hooks complete all as specified and as shown in drawings.

M&L for taking down old unserviceable mirror and teak wood beading and S&F new mirror of size 300x440x5mm and teak wood beading 10x12mm provided all around and shall be fixed on right hand side complete all as shown in drawings.

M&L for taking down old unserviceable metal pegs and S&F new Aluminum peg of size 75x120mm of best quality complete as specified in drawings and directed by Engineer-in-charge.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to hat stand with mirror to the required gloss and strictly through spray gun to old or new surface of had stand with mirror and as directed by Engr-in-Charge

SOFA SET 3/4/5 PERS/SEATERS WOODEN WITH DRRC (Drg No: FD-281)

M&L for taking out old unserviceable seat or back and S&F new seat or back of foam cushion of size 530x560x100mm 32-density duly covered with marking cloth and tapestry cloth of approved quality duly stiched complete all as specified in drawing and directed by Engr-in-charge. Note : Cost of Tapestry cloth shall not be less than Rs. 200/-per meter. Make of foam : SleepWell/Godrej/Splash.

M&L for taking out old unserviceable front legs and S&F new legs of size 530x70x35mm thick made of 1st class hard wood (teak), free from knots and cracks with permissible moisture content and of shape size as existing complete all as specified in drawing and directed by Engr-in-charge.

All as per serial item No. 19.02 above but rear leg as shown in drawing.

All as per serial item No. 19.02 above but arm as shown in drawing.

All as per serial item No. 19.02 above but side rail as shown in drawing.

All as per serial item No. 19.02 above but front rail of sofa set, three seater, as shown in drawing.

All as per serial item No. 19.02 above but wooden front rail of sofa set, single seater, as shown in drawing.

All as per serial item No. 19.02 above but wooden battens/support, as shown in drawing.

All as per serial item No. 19.02 above but wooden bearer/back frame support for sofa set of three seater, as shown in drawing.

All as per serial item No. 19.02 above but wooden bearer/back frame support of sofa set, single seater, as shown in drawing.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to Sofa Set 3/4/5 pers/seaters wooden with DRRC to the required gloss and strictly through spray gun to old or new surface of Sofa Set 3/4/5 pers/seaters wooden with DRRC and as directed by Engineer-in-Charge

Repair to Chair Dining Spl (TP)

M&L for removing of old seat and back upholstery and S&F new seat and back upholstery complete all as specified and directed by Engr-in-charge.

M&L for opening of joints from front leg and S&F new front leg made of 1st class hard wood teak, free from knots, cracks etc., of shape and size as existing complete all as specified and as direct by Engr-in-charge.

All as per serial item No 20.02 above but rear leg.

All as per serial item No 20.02 above but side rail

All as per serial item No 20.02 above but back support.

Hard PVC Rubber shoe with screw and washer.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to chair dining spl to the required gloss and strictly through spray gun to old or new surface of chair dining spl and as directed by Engineer-in-Charge

TABLE 900X600X760MM WITHOUT DRAWERS (FD-284)

M&L for removing of old broken components of table without drawers and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Leg as specified in the drawing.

Top long rail as specified in the drawing.

Top short rail as specified in the drawing.

Lower rail as specified in the drawing.

M&L for taking out old unserviceable top and S&F new top of table size 900x600mm, 18/19mm thick pre-laminated particle board, exterior grade conforming to IS-3087-1985, bonded with Phenol formaldehyde, with one side teak colour and other side white, including 4mm thick teak wood edging all around complete all as specified in drawing and directed by Engr-in-charge. Make : Novapan/ECO Board/Bhutan Board.

S&F Konia (wooden Bracket) of size 90x90 mm, 30 mm thick made of Ist class hard wood teak in between leg and short/long rail of the table fixed with screw to provide more strength complete all as specified in drawing and directed by Engr-in-charge.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to table without drawers to the required gloss and strictly through spray gun to old or new surface of table without drawers and as directed by Engineer-in-Charge

TABLE 900X900X760MM (Drg No: FD-291)

M&L for taking out old unserviceable top and S&F new Top table shall be made 18/19mm prelaminated partical board, (ISI Marked), exterior grade conforming to IS-3087-1985, bonded with Phenol formaldehyde with one side teak colour and other side white including 4mm thick teak wood edging all around complete all as specified in drawing and directed by Engr-in-charge. Make : Novapan/ECO Board/Bhutan Board.

M&L for taking down old unserviceable legs and S&F new legs 1st class seasoned teak wood free from knots, cracks etc., with permissible moisture content throughout and of shape and size as existing complete all as specified in drawing and directed by Engr-in-charge.

All as per serial item No. 22.02 above but top rail.

S&F Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and short/long rail of the table fixed with screw to provide more strength all as directed by Engr-in-Charge.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to table to the required gloss and strictly through spray gun to old or new surface of table and as directed by Engineer-in-Charge

Sofa Set 3 Pcs 5 Seated PU leather (TP)

M&L for taking down old unserviceable leather seat, back and S&F new leather seat, back with foam cushion of 32-density and spring of approved quality, fully covered, duly stiched complete all as specified and directed by Engr-in-charge. Make of foam : Sleep Well/ Godrej/ Splash.

Bed King Size (Double bed) (TP)

M&L for taking down old unserviceable plywood and S&F new plywood of size 6'.6" x 3' made 12mm thick ply wood commercial of size and shape as existing complete all as specified and directed by Engr-in-charge. Make of Plywood : Greenply / Kit ply / Centuryply.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to Bed King Size to the required gloss and strictly through spray gun to old or new surface of Bed King Size and as directed by Engineer-in-Charge

Table centre Glass Top (TP)

M&L for taking out old unserviceable leg and S&F new leg made 1st class hard wood teak free from knots,cracks etc., of shape and size as existing complete all as specified and directed by Engr-in-charge.

All as per serial item No. 25.01 above but long rail.

All as per serial item No. 25.01 above but short rail.

All as per serial item No. 25.01 above but stiffiner.

M&L for taking out old broken glass top and S&F new glass top of size 600x400mm made 8mm thick plain glass all as specified and directed by Engr-in-charge. Make of Glass: Modi Guard/Atul/Saint-Gobain.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to table centre glass top (TP) to the required gloss and strictly through spray gun to old or new surface of table centre glass top (TP) and as directed.

Bed Single (TP)

M&L for taking down old unserviceable plywood and S&F new plywood of size 6'.6"x3' made of 12mm thick plywood commercial, of size and shape as existing complete all as specified and directed by Engr-in-charge. Make of Plywood: Greenply / Kit ply / Centuryply.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to Bed Single (TP) to the required gloss and strictly through spray gun to old or new surface of Bed Single (TP) and as directed by Engineer-in-Charge

Table Bed Side (TP)

M&L for taking out old unserviceable knob/handle and S&F new decorative knob/handle complete all as specified and directed by Engr-in-charge.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to Table Bed Side (TP) to the required gloss and strictly through spray gun to old or new surface of Table Bed Side (TP) and as directed.

Table Dressing Ladies with Mirror (TP)

M&L for taking out old unserviceable foggi fadded looking mirror size 1200x380x5mm thick with frame and S&F new mirror of same size and shape as existing complete all as specified and directed by Engr-in-charge. Make of Mirror : ATUL/ Modi Guard/ Saint-Gobain.

M&L for taking out old U/S knob/handle and S&F new decarative knob/handle all as specified and directed by Engr-in-charge.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and French polish to Table dressing ladies with mirror (TP) to the required gloss and strictly through spray gun to old or new surface of Table dressing ladies with mirror (TP) and as directed by Engineer-in-Charge

Godara Construction and General Suppliers

L.BHIMSEN

BHARAT BUILDERS

M/S Dharam Chand Lal Chand Jain

SK INDUSTRIES