Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.7 LAccepted-AOC A 4 TARINI APARTMENT PHASE I KILBURN COLONY HINOO DISTT RANCHI JHARKHAND 834002 | RANCHI | RANCHI | JHARKHAND | 834002 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹28.6 L+₹2.9 L (11.3%)Rejected-Finance RIDMALSAR PUROHITAN BIKANER RAJASTHAN 334022 | BIKANER | RAJASTHAN | 334022 | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹29.4 L+₹3.7 L (14.4%)Rejected-Finance | L3 | Rejected-Finance HIGHER |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
25 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE Amritsar pin 143001
REPAIR MAINTENANCE OF MES INSTALLATION INCLUDING CERTAIN BR WORKS AT DIFFERENT LOCATIONS OF EM INSTALLATIONS UNDER AGE BR-II AT GE AMRITSAR CANTT
2023_MES_606547_1
GE/ASR-33/2023-24
Open Tender
Civil Works
Works
180 days
GE Amritsar
Class D category a i
8 documents required · 8 mandatory
₹500
GE Amritsar
₹60,000
28 Oct 2024
28 Jun 2023
26 Jul 2023
28 Jun 2023
25 Jul 2023
12 Jul 2023
Amount
Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level) ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour Cement concrete 50 mm thick type C-1 (1:3:6) using 20 mm graded stone aggregate as in plinth protection & sub base etc ; Complete all as specified and directed by Engineer-in-Charge.
Dismantling floor hearth or ,wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for brushing neat cement slurry with 3Kg of cement per Sqm including roughening of surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc ; Complete all as specified and directed by Engineer-in-Charge.
Material and labour for light coloured ceramic tiles 400x400x7 thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles bedded over and including 15mm thick cement slurry, pigment to match the colour of screed in cement mortar 1:6 ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for ceramic glazed coloured printed tiles (some portion highlighted with contrast colour) of size 300 x450 x 7 mm thick on and incl 10mm thick Rendering in cm (1:4) set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match the colour of tiles on vertical surfaces of well as in skirting / dado ; Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing dark/light shade vitrified ceramic tiles 10mm thick (square/ rectangular )polished, area of each tiles not exceeding 0.36 sqm as in floor set jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including15mm thick bedding layer in cement mortar 1:6 ; Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing dark/light shade vitrified ceramic tiles 10mm thick (square/ rectangular )polished, area of each tiles not exceeding 0.36 sqm as in vertical surfaces set jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including15mm thick bedding layer in cement mortar 1:6 ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for 75 mm thick PCC ( 1:4:8) type D-2 using 40mm graded stone aggregate as in sub-base ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for sand filling 25mm thick for laying of interlocking block ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Cement concrete machine pressed interlocking pavour block any shape and size confirming to IS 1568-2006 in M-35 grade, tiles 60mm thick Jointed and pointed in neat cement slurry as in floors ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing precoated chequered cement concrete tile 20 cm x 20cm x 25 mm thk set,jointed & pointed in neat cement slurry with grey cement and pigment in floor including screed bed 20mm thick in CM 1:6 ; Complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat with shuttering (without taking off shutters from frame including grill & guard bars) size of shutter not exceeding 1.5 sqm each and removing from site ; Complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat with shuttering (without taking off shutters from frame including grill & guard bars) size of shutter exceeding 1.5 sqm each but not exceeding 4 Sqm. and removing from site ; Complete all as specified and directed by Engineer-in-Charge.
Taking down shutter of any description exc 1.00 sqm but n.exc 2 Sqm each ; Complete all as specified and directed by Engineer-in-Charge.
Taking down and refixing same opening shutter exc.1 sqm and not exc 2 sqm each ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double frame, comprises glazed and gauged skelton shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete including cutting holes, making good dismentled portion in PCC 1:2:4 type B-1, ; Complete all as specified and directed by Engineer-in-Charge. (a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window. (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf. (c) MS tower bolt 150mm long - 02 Nos/leaf. (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf. (e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf. Note 1 :- Wire guage, Guard bar, sheet glass and painting shall be measured and paid sperately. 2. Mode of measurement for this item shall be for window portion only excluding ventilator portion where ever shown in drawing.
All as per Serial Item No 17 above but single frame in ventilator fixed ; Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 35 mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both side ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 35 mm thick 2nd class hard wood glazed and skeleton shutter’s open rebated prepare to receive glass gauge etc edges of framing plain chamfered or rounded fitted with Cut and mitered bead’s for securing glass gauge etc size of marker of shutters as per SSR Part-I Section-8 clause 8.2 (a) ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tube, suppling & fixing in opening as per specifiaction & drawing ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing framed work as in doors, chowkhat, Grill and guard bars,gates of angle frame work as in cooler stand fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing complete.Fe 410-W (Gde-E- 250) quality-. ; Complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass any thickness, size, quality or description from wooden frames or metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exc 0.5 sqm in each pane ; Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 3mm thick figured glass pin head type and glazing with oil putty in squares not exc 0.50sqm in each pane ; Complete all as specified and directed by Engineer-in-Charge.
Supplying and fixing in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing butt hinges medium weight cold rolled mild steel complete size 100mm ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 125 mm alluminum handles, cast type, anodised etc ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 150mm alluminum anodised barrel tower bolts of extruded sections and fixed ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for providing PCC 1:2:4 type B-1 ( using 20 mm graded stone aggregate ) for fixing of hold fast ; Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing rotational moulded polythelene water storage tanks tripple layer( white colour) of capacity 1000 litres with and including 20mm dia float valve with brass fittings hoisted, fixed in position and making connection including dismantling of existing unserviceable tank ; Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing rotational moulded polythelene water storage tanks tripple layer of capacity 500 litres (white Colour) with and including 15mm (including reducer if required) with 15/20mm dia float valve with brass fittings hoisted, fixed in position and making connection including dismantling of existing unserviceable tank ; Complete all as specified and directed by Engineer-in-Charge.
Raking out joints/pointing to brick work or brick tiles, 30cmX15 cm laid flat, in floor , surface channels, roofs etc ; Complete all as specified and directed by Engineer-in-Charge.
Material and labour for flush pointing to brick 30cmX15 cm laid flat, brick on edges or brick tiles in paving in cement mortar 1:3 ; Complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing and connections of 15mm bore ; Complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing and connections of 20mm bore ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing of GI Tubing medium grade 15mm bore laid in trenches and as wall `complete including cuttings chases in walls and making good, cutting portion ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing of GI Tubing medium grade 20mm bore laid in trenches and as wall `complete including cuttings chases in walls and making good, cutting portion ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing for 15 mm Bib taps, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm bore and fixed in repairs ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed ; Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 15 mm bore, Angle valves, cast copper alloy, concealed, chromium plated with fancy type screwed down high pressure with crutch screwed both ends for iron pipe or for unions including taking down old unserviceable stop valve ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs concealed stop cock 15mm dia bore chromium plated cast copper alloy with long shank and cup (concealed type) ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs vitreous china squatting pan Orissa pattern size 580 x440mm white with integral footrest, including trap set and conection to trap, flushing pipe etc. complete including making good to floor ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs PVC valveless , syphonic action flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve , float and handle including brackets and PVC flush pipe complete all as specified.
Supply and Fixing in repairs 15mm dia PVC connection with PTMT nuts and PVC washers 45 cm long and connecting of water pipes ; Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs vitreous china urinal half stall type with CP spreader for fixing with 15mm dia pipe with grating and union for discharge pipe, including providing and fixing plugs with urinal spreader, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs vitreous china wash hand basin white flat back size 580 x 450mm incl waste, china & porcelain stopper incl brackets ; Complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on brick or stone or concrete surfaces of wall etc ,icluding raking out joints , hacking for key, scrubbing down with water etc ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) finished the surface for even and smooth without using extra cement ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished the surface for even and smooth with WPC @100 ml per 50 kg of cement or all as per manufacturing instruction ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Rendering 5mm thick in CM 1:3 to fair face of brick works or concrete surfaces of ceiling finished the surface for even and smooth without using extra cement ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for preparation of new plastering surfaces of walls and applying two coat of cement base paint over a coat of primer etc. ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for two coat of oil bound distemper over a coat of primer on newly plastered surface of wall incl preparation of surface ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Three coats of white washing on new plastered surfaces of ceiling , chajjas after preparation of surfaces ; Complete all as specified and directed by Engineer-in-Charge.
Demolition of brickwork built in cement mortar ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Brick work built CM 1:6 subclass B brick straight or curved on plan exc 6m mean radius ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Brick work but except bricks built CM 1:6 subclass B brick straight or curved on plan exc 6m mean radius ; Complete all as specified and directed by Engineer-in-Charge. Note:- Serviceable bricks obtained from dismantling of brick work shall be reused.
Material and Labour Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) as in boundary wall, drain etc ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for preparation of new steel surface and applying two coat of synthetic enamel paint over one coat of red oxide primer on new surface ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for preparation of new wood surface over 10 cm girth or width and apply two coat synthetic enamel paint over a coat of pink primer ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Preparation of old painted wooden surfaces of any description, exceeding 10 cm width or girth including cleaning, stopping and rubbing down etc and applying one coat of synthetic enamel paint ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Preparation of old painted steel surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint ; Complete all as specified and directed by Engineer-in-Charge.
Demolition of Reinfoced cement concrete for roofs, floors,(other than ground floors) beams , stair cases, landing,chajjaa and similar suspended work ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for RCC with type B0 (1:2:4) (using 12.50mm graded aggregate ) in Slabs supported on walls , beams and columns in floors , roofs ., landings, balconies , canopies, deck slabs and cover slab in shelves and the like ; Complete all as specified and directed by Engineer-in-Charge.
Formwork to the soffits of suspended slabs such as roof slabs , floor slabs , landings and similar work ; not exceeding 200 mm thick ( Horizontal or sloping ) and making flat rough finished surfaces of concrete ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for TMT bars 6 to 8 mm mm dia and over , cut to length , bent to shape required , including cranking , bending spirally for hooping ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips ; Complete all as specified and directed by Engineer-in-Charge.
Dismantling of Asbestos cement (corrugated,semi corrugated, etc.) sheets in roof coverings ; Complete all as specified and directed by Engineer-in-Charge.
Dismantling wooden fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section
Dismantling unframed timber scantling 40sqcm and over in section,in any position ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering fixed with self tapping screws / L type or J type hook complete all as specified and directed by Engr-in-Charge.
Supply and Fixing prepainted galvatume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering incudingl ridge fixed with self tapping screws / L type or J type hook ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. FE -290 Gde E-165 ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs110 mm bore PVC (SWR ) pipes single socketed, in any lenth with rubber ring fixed to wall ; Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 110 mm bore PVC (SWR) bends any radius with access door ; Complete all as specified and directed by Engineer-in-Charge.
Dismantling brick tiles or terracing tile, single/double layer on roof including mud phuska any thickness and leepng plaster, seggregating, cleaning and stacking servicable tiles for reuse ; Complete all as specified and directed by Engineer-in-Charge.
Demoliton of mud in roof any thickness including mud plastering and removing to distance exc 250m but n exc 500m ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for brick tiles but except brick tile, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and directed by Engineer-in-Charge. Note:-Old serviceable tiles shall be reused.
Material and Labour for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) averaging 50 mm thick as in roof padding mixed with WPC @ 100ml per 50 Kg cement finishing the surface even and smooth without using extra cement complete all as specified and directed .Note : WPC shall be measured and paid separately under relevant item of Sch 'A').
Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc ; Complete all as specified and directed by Engineer-in-Charge.
Material & Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces ; Complete all as specified and directed by Engineer-in-Charge.
Supply only water proofing compound liquid type (ISI Marked) ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing MS work as in gates, hook and pintle hinges large haspa and staples, chains hand made sliding bolts, clamps , hold fasts, wall ties , plate washers and similar small articles conforming to Fe 290 Gde E-165 including dismantling of old gate ; Complete all as specified and directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed by Engr-in-Charge.
Dismantling RCC fencing posts any section incl taking out embedded portion and making good distrubed ground (posts embededed in natural ground) ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. ; Complete all as specified and directed by Engineer-in-Charge. (each line wire to be measured)
Fixing only Chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining blots, etc. including provision of binding wire ; Complete all as specified and directed by Engineer-in-Charge.
Supply only MS galvanished chain link fencing using 4mm dia GI wire 40 x 40mm mesh as in fencing ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing and other steel section, drilled and countershunk, embedding in concrete and screwing etc post and struts in fencing inluding cutting tops to shape as directed, drilling holes, notching for wires etc flat iron fillets, round bar and nut/bolt (for securing wire mesh ) ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing mild steel bolts screw (machine made) with hexagonal or square head at one end and screw the other or screw both ends, each each screwed ends, to be fitted with washer and one hexagonal or squre nut exceeding 10cm and not exceeding 15 cm long and dia meter of shank 11 to 15mm, ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for mild steel round bars Fe 410- Gde E-250 around fencing hooking,welding and straining properly to fencing complete all as specified and directed by Engr-in-charge.
Material and Labour for PCC 1:3:6 type C-2(using 20mm graded stone aggregates) as in roof kerb or mud stops,rounded or chamfered on edges and like including weathering slight rounded and throating ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour cement concrete 100 mm thick (1:2:4) type B1 using 40 mm graded stone aggregate as in floor ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in drain covers ; Complete all as specified and directed by Engineer-in-Charge.
Material and Labour for forming fair finished drain or channel in cement concrete,using extra cement, including forms,moulds,mitred/stopped ends etc ; Complete all as specified and directed by Engineer-in-Charge.
Taking down rolling shutters including hood cover, adjusting all components, greasing/ oiling, replacement of defective/ unserviceable components all as directed for area not exc. 6 Sqm and refixing in the same opening including hood cover, making good disturbed surface of wall, beam, columns in CM 1:3 ; Complete all as specified and directed by Engineer-in-Charge.
Taking down rolling shutters including hood cover, adjusting all components, greasing/ oiling, replacement of defective/ unserviceable components all as directed for area exc 6 and not exc 12 Sqm and refixing in the same opening including hood cover, making good disturbed surface of wall, beam, columns in CM 1:3 ; Complete all as specified and directed by Engineer-in-Charge. Note: Spare components will be measured and paid separately under relevant items.
Supply and Fixing Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as complete:gear operated type with bevel gear box and crank handle ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing Safety lever locks mild steel with 4 levers for rolling shutters ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing Ball bearing for rolling shutters ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) front or back inlet including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and making good to floor complete as in repairs ; Complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs plastic water closet seat, white , closed patern withflat bottom and cover and mild steel chromium plated or aluminium hinging device ; Complete all as specified and directed by Engineer-in-Charge.
EM PORTION Supply and fixing in replacement HT cable route indicator of Cast iron not less than 100 mm dia fixed through welding angle iron supoort of size 35 mm x 35mmx5mm thick ,50 cm long including two coats of synthetic enamel paint over a coat of red oxide primer planted in a PCC block of size 45 cm( height) x30cm width x 10 cm thick (PCC 1:3:6) , The whole assembly of PCC iron will be planted in ground upto 30 cm ; Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement Danger notice plate for HT11 KV of 25 cm x 20 cm x 1.6mm thick mild steel sheet viterous enameled white, with letters figures and conventional skull and bones and written as "DANGER" in signal red colour and fixed MS clamps made out of MS flat 25 mm x 3mm, including nuts & bolts, including 2 coats of aluminium paint over a coat of red oxide primer ; Complete all as specified and directed by Engineer-in-Charge. Note:- Instructions are to be written in three languages viz.. Punjabi, Hindi and English.
Supply and fixing in replacement Battery bank with 2 Volts 120 AH battery maintenance free complete with connecting bus bars and connected wiring incl stanf anticorrosive ; Complete all as specified and directed by Engineer-in-Charge. Make- Exide/ Amar Raja/ Amron Note - The batteries will be procuured from AUth dealer and certificate to that issue will be submitted to the office for record
Supply and fixing in replacement fo PCC cable covers, MS chequred plates of suiatble size as per site requirement of thickness 7 mm incl drop down type Hook arrangement incl all supporting angles duly grouted in side wall or as required and ; Complete all as specified and directed by Engineer-in-Charge. ( Note - The rate quoted shall be inclusive of angle iorn work cuting welding etc required at site)
Supply and fixing FRP fencing made up with using FRP rod 12 mm dia,channel size 50 x 24 x 4 mm box section 50 x 25 mm 'I' section 38 x 15 x 3 mm and square box section 50 x 50 mm in post embeded in plain cement concrete (1:4:8) type D2 using 20 mm graded stone aggregate (45 cm x 45 cm x 45 cm) including necessary excavation and earthwork at 1.25 m C/C with height of fencing 2 m ( the panel shall be of size 2 mtr in height and 1 mtr in width) from GL including entrance gate of size 1m x 2m of same material.SS aldrop bolt 300 mm long,150 mm size pressed steel handles and 2 Nos tower bolts SS hinges as required etc complete all as specified directed by Eningeer-in-Charge.Make Sintex or equivalent as approved by GE Note:- Verticle posts and rail section shall be manufactured of fibre glass reinforcement min 45% and formulation of polyster based thermoset resins ( Note- Rate quoted shall be inclusive of excavation and earth work and PCC all as specified in the item )
Supply and spreading in electrical outdoor installation yard, stone aggregate of size 20 mm at 11KV substations / Near DP structures etc a ; Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing glyphosate 41% SL Glykol Herbicide to remove vegatation from E/M Installations complete all as specified and directed by Engr-in-Charge
Taking down the existing MS rolling shutters of area exceeding 2 sqm each and repair/ replacement of ball bearing, Springs top cover, anchoring rod, safety level locks, hasp and staple etc and make it functional to the entire satisfaction of the Engineer in charge and refixing the rolling shutter in the same opening including necessary greasing, oiling and painting with two coats of synthetic enemelled paint etc complete all as speciifed and as directed by Engineer -in-charge
Supply and fixing in replcement Anti-climbing device; spikes type fabricated out of M.S. bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole ; Complete all as specified and directed by Engineer-in-Charge.
S S CONSTRUCTION COMPANY
Saini Constructions
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .