Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.9 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹50.0 L+₹2.1 L (4.34%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹52.6 L+₹4.7 L (9.74%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹53.6 L+₹5.7 L (11.9%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | Rejected-Technical | - | Rejected-Technical Required documents not submitted |
Tender Value
₹64 L
EMD Value
₹64,000
Closing Date
11 Mar 2020, 5:00 pmClosed
SE EWC, AYODHYA
Office of SE EWC, AYODHYA
CONSTRUCTION OF NEWLY PROPOSED 33/11 KV 1X5 MVA CAPACITY S/S SARKAURA IN DISTT SULTANPUR ON PARTIAL TURNKEY BASIS
2020_MVVNL_420598_3
28/SE/EWC/AYO/2019-20
Open Tender
Electrical Works
Item Wise
90 days
SULTANPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
SUPERINTENDING ENGINEER EWC, AYODHYA
₹64,000
16 Jun 2020
2 Mar 2020
12 Mar 2020
2 Mar 2020
11 Mar 2020
2 Mar 2020
Amount
Supply of Materials
MS Channel 100X50X2028mm (Dropper for TPMO & fuse set).with Dropper nuts & Bolt.
Top channel 100x50 mm 2240 mm (10.70kg/M) with clamp, nuts & bolts.
M.S. Angle Iron 65x65x6mm, 2700 mm bracing set complete with clamp
Grouting with concrete of Stay Set
G.I. Stay Set With Rod 16X1800 mm.
Stay Wire 7/10 SWG
11 kV Stay Clamp
11 kV Pin insulator
11 kV Pin with Nut
33KV Pin Insulator
33 kV Pin with Nut
Armour Rod with Ferrule for ACSR Dog Helical performed
Stone pad (300x300x75 mm)
11 kV SMC Danger board with clamp with N&B
11KV Disc. Insulators T &c type 45 KN
11 kV Disc. Fittings T &C type for Weasal Conductor
11 kV Disc Insulator B&S type 70 KN
11 kV Disc Fittings B&S type 70 KN for Dog
33 kV Post Insulator
Structure for 33 kV Post Insulator (3 nos.) with Plinth & foundation as per DRG. No. RES-39
11KV TPMO (As per Specification)
11KV Fuse Set
Structure for 33 kV Isolator(Line/Bus) with Plinth & foundation as per DRG. No.RES-39
33KV Lightning Arrestor
Structure for 33 kV Lightning Arrester with Plinth & foundation as per DRG. No.RES-39
Structure for 33 kV VCB with plinth & foundation
Structure 33 kV Single Phase CT (3 Nos.) with Plinth & foundation as per DRG. No.RES-39
24 Volt battery and battery charger with cabinet complete
Control cable 6x2.5 mm sq.
Control cable 4x2.5 mm sq.
Control cable 2x2.5 mm sq.
Earthing of substation complete as per specification (Indoor earthing) as per DRG No. RES-43 Including earth mat round bar 32 mm dia
Earthing of substation complete as per specification (Outdoor switchyard earthing/ Earth mat) as per DRG No. RES-43
11 KV Cable Stand with Plinth & foundation
11 KV Neutral Stand with Plinth & foundation
FRP fencing with gate/ switchyard (as per Specification) (30x25)x2
90 watt LED. Street Light With Fitting and .3.5 Core 16 sq mm PVC LT Cable From control bord to All lightes (Outdoor switchyard lighting in SS)
Painting of Structures in SS (two coats of red oxide primer and two coats of aluminium paint.)
T & P of Sub-Station & Switchgears (As per Specification)
4.5 Kg. CO2 fire extinguisher, portable type
5 kg. Dry chemical powder fire extinguisher, portable type
Fire buckets (4 nos.) with stand filled with dry sand
Rubber matting 20 sq. mm. thick size (1 X 2 mtr.)
S/S name board (SMC) with stand
Single line Diagram, Notice bord
SMC MCCB Distribution board (1 No. I/C & 3 No. O/G)
GI Pipe 4" Diameter
G.I. Barbed wire
Alluminium paint
Red Oxide paint
Pipe type earthing complete (20mtr or up to water level by B class G.I. pipe 50 mm dia And 50X6 mm G.I. earth strip for connection, clamps , bolts nut etc.)
Earthing of Pole/Rod by MS earthing rod of 20x2500 mm.etc.
Concreting of supports with plinth (0.268 Cu.m. each)
P.G. Clamp for Dog
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x300 Sq.mm. cable size (Outdoor termination kit)
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x300 Sq.mm. cable size (Indoor termination kit)
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x185 Sq.mm. cable size (Outdoor termination kit)
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x185 Sq.mm. cable size (Indoor termination kit)
LT Aluminium XLPE insulated armoured Cable of size 3.5x70 sqmm.
Copper L-Piece of size 400x50x6 mm for LT bushing Rod of transformer
90 lbs Rail pieces for transformer 44.64 Kg/M, 6.92 Mtr. long
Earth wire clamp with bolt and nuts
33 KV Cable Stand with Plinth & foundation
33 kV Main bus bar complete with structure, Plinth & foundation as per DRG No. RES-38
Stringing of 33KV Bay by using and laying of ACSR Dog Conductor including making Vertical/Horizontal jumper connection in "Y" shape through PG clamps and connecting all the equipments ( Bus isolator, P.I. , C.T. , VCB, L.A & T/F) with each other through connecting clamps. as per DRG No. RES 36(A)
Civil Material for Laying of 11 KV U/G cable (cost of sand and bricks)
Making of 4 no. water shoking chamber of size 0.75X0.75X1.2 Cu M with RCC cover in yard, connecting all chambers by 4" dia HDPE pipe to the roof of control room to collect the rain water.
Connector for L.I./B.I./L.A.
Erection of Following Materials
ST Pole 11 Mtr. SP-55
ST Pole 9 Mtr.
MS Channel 100X50X2028mm (Dropper for TPMO & fuse set).with Dropper nuts & Bolt.
Top channel 100x50 mm 2240 mm (10.70kg/M) with clamp, nuts & bolts.
M.S. Angle Iron 65x65x6mm, 2700 mm bracing set complete with clamp
Providing and erection of civil material for Grouting with concrete of Stay Set
G.I. Stay Set With Rod 16X1800 mm.
Stay Wire 7/10 SWG
11 kV Stay Clamp
11 kV Pin insulator
11 kV Pin with Nut
33KV Pin Insulator
33 kV Pin with Nut
Armour Rod with Ferrule for ACSR Dog Helical performed
Stone pad (300x300x75 mm)
11 kV SMC Danger board with clamp with N&B
11KV Disc. Insulators T &c type 45 KN
11 kV Disc. Fittings T &C type for Weasal Conductor
11 kV Disc Insulator B&S type 70 KN
11 kV Disc Fittings B&S type 70 KN for Dog
33 kV Post Insulator
Structure for 33 kV Post Insulator (3 nos.) with Plinth & foundation as per DRG. No. RES-39
11KV TPMO (As per Specification)
11KV Fuse Set
33KV Line Isolator
33KV Bus Isolator
Structure for 33 kV Isolator(Line/Bus) with Plinth & foundation as per DRG. No.RES-39
33KV Lightning Arrestor
Structure for 33 kV Lightning Arrester with Plinth & foundation as per DRG. No.RES-39
33 kV VCB (motorised)
Structure for 33 kV VCB with plinth & foundation
33 kV 1 Ph CT 200/100/1 Amp.
Structure 33 kV Single Phase CT (3 Nos.) with Plinth & foundation as per DRG. No.RES-39
33 KV C.T. 400/200/IA
33kV Control panel for double T/F with differential relay
33kV Control panel for single feeder without differential relay
11 KV VCB Switchgears with Incoming CTR 600/300/5A, 350 MVA
11 KV VCB Switchgears with Outgoing CTR 200/100/5A 250 MVA
24 Volt battery and battery charger with cabinet complete
Control cable 6x2.5 mm sq.
Control cable 4x2.5 mm sq.
Control cable 2x2.5 mm sq.
Earthing of substation complete as per specification (Indoor earthing) as per DRG No. RES-43 Including earth mat round bar 32 mm dia
Earthing of substation complete as per specification (Outdoor switchyard earthing/ Earth mat) as per DRG No. RES-43
11 KV Cable Stand with Plinth & foundation
11 KV Neutral Stand with Plinth & foundation
Cable trench (155mm width X 205mm depth ) (Providing and erection of civil material, steel items)
Control Cable Trench Cover (200 mm x 600 mm) (Providing and erection of civil material, steel items)
Toe Wall boundary of switchyard With foundation, brick work and plastering (30x25)x2 mm (as per Specification) (Providing and erection of civil material, steel items)
FRP fencing with gate/ switchyard (as per Specification) (30x25)x2
90 watt LED. Street Light With Fitting and .3.5 Core 16 sq mm PVC LT Cable From control bord to All lightes (Outdoor switchyard lighting in SS)
Painting of Structures in SS (two coats of red oxide primer and two coats of aluminium paint.)
T & P of Sub-Station & Switchgears (As per Specification)
4.5 Kg. CO2 fire extinguisher, portable type
5 kg. Dry chemical powder fire extinguisher, portable type
Fire buckets (4 nos.) with stand filled with dry sand
Rubber matting 20 sq. mm. thick size (1 X 2 mtr.)
S/S name board (SMC) with stand
Single line Diagram, Notice bord
SMC MCCB Distribution board (1 No. I/C & 3 No. O/G)
GI Pipe 4" Diameter
G.I. Barbed wire
Alluminium paint
Red Oxide paint
Pipe type earthing complete (20mtr or up to water level by B class G.I. pipe 50 mm dia And 50X6 mm G.I. earth strip for connection, clamps , bolts nut etc.)
Earthing of Pole/Rod by MS earthing rod of 20x2500 mm.etc.
Concreting of supports with plinth (0.268 Cu.m. each)
P.G. Clamp for Dog
ACSR Dog Conductor
11 KV 3 Core Al. XLPE Insulated Cable 3x300mm sq.
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x300 Sq.mm. cable size (Outdoor termination kit)
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x300 Sq.mm. cable size (Indoor termination kit)
11 KV 3 Core Al. XLPE Insulated Cable 3x185mm sq.
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x185 Sq.mm. cable size (Outdoor termination kit)
Heat Shrinkable jointing kit suitable for 11kV XLPE 3x185 Sq.mm. cable size (Indoor termination kit)
LT Aluminium XLPE insulated armoured Cable of size 3.5x70 sqmm.
5 MVA -33/11kV Power Transformer
11KV/0.433 KV, 3 Phase, 63 KVA Transformer (BEE standard, 3 star rating self protected type), Al. wound
Copper L-Piece of size 400x50x6 mm for LT bushing Rod of transformer
90 lbs Rail pieces for transformer 44.64 Kg/M, 6.92 Mtr. long
Power Transformer Plinth of size 3.46x4.46 Mtr. having 0.5 Mtr. below ground level and 0.4 Mtr. above ground level. (Providing and erection of civil material, steel items)
(Station T/F) Plinth with RCC Top 2x4x1.6 Mtr. (Providing and erection of civil material, steel items)
Fixing interlocking bricks in switch yard and approch road 18x45 (Providing and erection of civil material, steel items)
Earth wire clamp with bolt and nuts
Earth filling of soil including cartege from out Side
33 KV Cable Stand with Plinth & foundation
33 kV Main bus bar complete with structure, Plinth & foundation as per DRG No. RES-38
Stringing of 33KV Bay by using and laying of ACSR Dog Conductor including making Vertical/Horizontal jumper connection in "Y" shape through PG clamps and connecting all the equipments ( Bus isolator, P.I. , C.T. , VCB, L.A & T/F) with each other through connecting clamps. as per DRG No. RES 36(A)
Civil Material for Laying of 11 KV U/G cable (cost of sand and bricks)
Making of 4 no. water shoking chamber of size 0.75X0.75X1.2 Cu M with RCC cover in yard, connecting all chambers by 4" dia HDPE pipe to the roof of control room to collect the rain water.
Connector for L.I./B.I./L.A.
Safe Loading, Cartage and then safe unloading of the following material from Store Centre under EEESD Ayodhya to dump site proper stacking.
ST Pole 11 Mtr. SP-55
ST Pole 9 Mtr.
33KV Line Isolator
33KV Bus Isolator
33 kV VCB (motorised)
33 kV 1 Ph CT 200/100/1 Amp.
33 KV C.T. 400/200/IA
33kV Control panel for double T/F with differential relay
33kV Control panel for single feeder without differential relay
11 KV VCB Switchgears with Incoming CTR 600/300/5A, 350 MVA
11 KV VCB Switchgears with Outgoing CTR 200/100/5A 250 MVA
ACSR Dog Conductor
11 KV 3 Core Al. XLPE Insulated Cable 3x300mm sq.
11 KV 3 Core Al. XLPE Insulated Cable 3x185mm sq.
11KV/0.433 KV, 3 Phase, 63 KVA Transformer (BEE standard, 3 star rating self protected type), Al. wound
Kgn Construction And Distribution
DEVYANSH CONSTRUCTION AND DEVELOPERS PVT. LTD.
RAKESH ELECTRIC WORKS,ECID
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .