SPL REPAIR AND RE-WIRING OF GOVT MD ACCN BLDG NO P-19 (01 TO 12 QTRS) AT BHAGAT LINE UNDER AGE B/R-III OF GE(SOUTH) MEERUT CANTT

Amount

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed.

Taking down of shutter of any description exc 1 Sqm & n.exc 2 sqm each complete all as specified and directed.

Material and labour Solid PVC door frame plain colour of size 50mm x 47mm made out of 5mm PVC sheet reinforced with MS square fixed with rawl plug tube as per specification and drawing complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC, ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to get with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 178 of SSR 2020 (Part-II) .

Dismantling of steel windows from any location and in any position and removing from site complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply & fix steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetaied or welded including cutting holes and painting with one shop coat of zinc chromate primer including making good the disturbed surfaces. complete all as specified & directed.

Supply & fix steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including cutting holes and painting with one shop coat of zinc chromate primer including making good the disturbed surfaces and match with the existing surfaces by providing whitewash / colourwash / distempering / cement base paint complete all as specified & directed.

Material and labour Steel ventilators top hung shutter including with box type hinges, steel peg stay wiyh glazing bar all as specified & directed

Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and / or riveted or forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-290 Gde F-165 complete all as specified & directed.

Supply & fix galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

Supply and fix in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples in steel widows including removal of wire cloth from existing steel windows, providing new wire cloth and fixed with screws or rivets and provision of new flat iron beads of size 12x5mm complete all as specified and as directed. (Note : Removal of steel window incl refixing in same location where necessary will also included in quoted rate.)

Hacking out old broken glass (any thickness), size quality or description from wooden frames glazed with putty or fixed with beads complete all as specified and directed.

Material and labour 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square nexc 0.50sqm each pane complete all as specified and directed.

Supply and fix pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, etc profile of frame 105x60mm made out of 1.25mm MS sheets including one shop coat of primer complete all as specified and directed.

Supply and fix pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, etc profile of frame 125x60mm made out of 1.25mm MS sheets including one shop coat of primer complete all as specified and directed.

Material and labour 2nd class H.W panelled shutters 35mm thick (3 panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.

Supply & fix 35mm thick glazed and skeleton shutter (3 Panel) for doors of second class hard wood open rebated and prepared to receive glass, gauge etc with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/gauze etc. sizes of member of shutters as specified in SSR Part-I, clause 8.24 (a) complete all as specified & directed.

Supply and fix 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Material and labour 100mm long stainless steel butt hinges complete all as specified and directed.

Material and labour 150mm long extruded aluminium anodised handles fabricated type complete all as specified and directed.

Material and labour 200 mm long aluminium anodised barrel tower bolts of extruded section.all as specified & directed

Material & labour for two coat of synthetic enamel paint on old primed steel surface of any description over 10cm width or girth complete all as specified & directed.

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

Material and labour 150 mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified all as directed

Material and labour 150 mm Mild steel pressed handles, oval type, stove enamelled black complete all specified and directed

Material and labour butt hinges 100mm long medium weight cold rolled mild steel and fixed.all as specified & directed

Material and labour 150mm long MS helical spring fixed by welding with MS door frame complete all as specified and directed.

Material and labour 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Material and labour preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primerall as specified & directed

Material and labour preparation of old painted wooden surfaces of any description, not other wise described over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified & directed

Material and labour PCC(1:2:4) Type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.

Material and labour PCC(1:2:4) Type B-0 using 12.5mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.

Dismantling, floor tiling / kota stone flooring including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete of first floor n exc 15 cm in depth by electrically operated mechanical hammer or using drilling machine without damaging RCC slab specifically provided for.

Taking down / removal of wall tiling, terrazzo topping and kota stone from vertical surface any type incl cement mortar bedding upto brick surface for new tile work and removing rubbish off the premises complete all as specified & directed.

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified and directed.

Material and labour Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM (1:4) complete all as specified and directed. Make :- Kajaria, Johnson, Somany (Premium quality) Note:- The designer concept shall be approved by GE

Material and labour non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile of size 600 x 100mm made from 600 x 600mm tile in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 10mm thick screed bed in CM (1:3) complete all as specified and directed. Make :- Kajaria, Johnson, Somany (Premium quality) Note:- The designer concept shall be approved by GE

Material and labour for glazed ceramic coloured tiles (premium quality) of size 450X300X7 mm thick as in skirting/dado set, jointed in near cement slurry and pointed in white/coloured cement to match, laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Make :- Kajaria, Johnson, Somany (Premium quality) Note:- The designer concept shall be approved by GE

Material and labour for 16-18mm thick machine cut prepolished Udaipur green slab flooring on cooking platform over 15mm thick screed laid in cement mortar 1:4 screed laid and jointed with grey cement mioxed with pigment to match the shade of slab including moulding to exposed edges of slab complete all as specified and directed.

Material and labour for 18 to 20 mm thick black granite factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges,complete all as specified and directed.

Material and labour Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & mirror polishing complete over and including screed bed or bedding layer of mortor 15mm thick for laying floor finishes in CM 1:6 complete all as specified & directed.

Material and labour kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement over 10mm thick screed bed in CM(1:4) and jointed with grey cement slurry mixed with pigment to match including grinding and mirror polishing complete all as specified & directed.

Material and labour Machine cut kota stone slab flooring in single piece over steps of staircases 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & mirror polishing complete over and including screed bed or bedding layer of mortor 15mm thick for laying floor finishes in CM 1:6 complete all as specified & directed.

Material and labour Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.16sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM (1:4) as specified and directed. Make :- Kajaria, Johnson, Somany (Premium quality) Note:- The designer concept shall be approved by GE

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc. complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

Material & labour for half brick work built in CM 1:4 with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius complete all as specified and directed.

Material and labour in repair 20 mm dia PTMT ball valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Material and labour in repair long body bib taps brass cromium plated fancy type 15 mm bore size screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specfied and directed. Make - Cera Cat Part No- F-1014152, Pear Cat Part No-ARI-003, Hindware Cat Part No-F330011

Material and labour in repair 15 mm dia Concealed stop cock chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union fixed complete all as specfied and directed. Make-Crea Cat Part No F-1015362,PearlCat Part No ARI-009, Hindware cat Part No F-200007

Material and labour 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot and cold water screwed, fixing and connection to pipes complete all as specified and as directed. Make : Crea Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat part No F-740022

Material and labour 15mm dia chromium plated fancy type sink mixer with swinging spout (Wall mounted model,) fixing and connecting to pipes complete all as specified and as directed. Make : Crea Cat Part No F 2004501,Pearl Cat Part No ARI--011,Hindware Cat Part No F-330023

Material and labour brass chromium plated central hole wash basin mixture, fancy type with or without lettered 15mm for mixing 'Hot' or 'Cold' water with long screwed shanks and fly nut capstan head or unions and screwed to walls complete all as specified and as directed. Make : Cera Cat Part No F-2002461, Pearl Cat Part No ARI-013, Hindware Cat Part No F-740009

Material and labour Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Material and labour in repair 15 mm dia stop cock / angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union fixed complete all as specified and directed.

Supply and fixed in repair of PVC low level flushing cistern 10 litre capacity valveless syphonic action type white as approved incl ball alve float valve and handle,32 mm dia flush pipe complete all as specified and directed Make : Parryware, Cera, Hindware

Material and labour in repair 125mm size brass CP shower rose with or without swivel joints complete all as specified and as directed

Material and labour CP brass soap dish of 160x160x90 mm complete all as specified

Material and labour fancy type glass corner shelf made of not less than 5.5mm thick toughned glass of size 250mm x 250mm fixed with CP brackets complete all as specified and directed

Supply & fixing in repair PVC connections of 600mm long suitable for 15mm dia iron pipe incl PTMT nuts complete all as specified & directed.

Cutting chases in brick walls incl pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed.

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified and directed.

Material and labour tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all as specified and directed.

Material and labour tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20 mm bore complete all as specified and directed.

Supply and fix in repairs G.I tube any grade to wall ceiling or laying in floors for 15 mm bore pipe( Old G.I. tubes will be reused) complete all as specified and directed.

Supply and fix in repairs G.I tube any grade to wall ceiling or laying in floors for 20 mm bore pipe( Old G.I. tubes will be reused) complete all as specified and directed.

Material and labour triple layer 500 Ltrs capacity white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) including nipple nuts and washers for fixing inlet,outlet/washout pipes and air vent pipes and including dismantling or exesting water tanks of any type & removing complete all as specified and directed.

Material and labour in repair brass chromium plated towel rail D type 600 mm long as a approved quality.complete all as specified and directed.

Material and labour in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.

Supply & fixing in repairs vitreous china squatting pan 'Orissa' pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) and trap, including connections to trap, and to flush pipe, anti -syphonage pipe, etc. complete including making good to floor complete all as specified & directed.

Supply & fix in repair 25mm dia stainless steel curtain rod of approved finish of superior quality including fancy type knobs at both ends, fancy type brackets for supports etc complete all as specified and directed.

Material and labour for repair of overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish incl all necessary formwork complete all as specified and directed.(height of work to be considered above 3.5m and upto 7m from FFL of ground floor. Note : Wherever reinforcement is required the same is do be provided and will be paid separately under relevent item)

Dismantling of roof treatment including brick tiles and mud phuska and removing the debris from site complete and cleaning the roof with water complete all as specified and as directed.

Material & labour for cleaning of plastered surface of roof and applying priming coat using bituminous primer @ 0.30kg per Sqm followed evenly by a track coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen, over it laid with 3mm APP modified polymeric water proofing membrane minimum weight 3.60 kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it of tack coat using 85/25 grade industrial hot blown bitumen @ 1.20 kg per Sqm and finally finish the top by providing PCC tiles of size (200x200mm) and (20-22mm) thick machine made and laid on cement sand mortar (1:4) screed 12mm thick. The joint of the tiles shall be grouted and flush pointed with cement sand mortar (1:3) mixed with integral water profing compound complete all as specified & directed

Material and labour for 40 mm thick (average thickness) PCC 1:2:4 TYPE b-1 , USING 20 mm graded stone aggregate as in padding on roof finished the surface even and fair wothout using extra cement complete all as specified and directed

Material and labour for screed bed or bedding layer of mortar, 20mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with and using water proffing liquid @ 200ml per 50 kg of bag of cement including finish the surface even and smooth without using extra cement complete all as specified and directed. Note:- water proofing liquid shall be measured and paid separately.

Material & labour for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) Material & labour for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix of 32mm dia GI pipe medium grade, 450m long 9(for draining out the water) all as directed by engineer-in-Charge

Supply only liquid water proofing compound complete all as specified and directed

Material and labour rendering 10mm thick in CM 1:4 as in ceiling and finished even & smooth without using extra cement complete all as specified and directed.

Material and labour preparing newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed.

Material and labour 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.

Material and labour 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.

Material and labour for preparing newly plastered surfaces of walls and applying two coats of oil emulsion distemper using roller over one coat of wall care putty of 2mm thickness complete all as specified and directed.

Material and labour for preparing newly plastered surfaces of walls and applying two coats of exterior emulsion paint (weather proof) on newly plastered wall surface over a coat of primer over two coat of wall care puty of 1.00-1.50mm thick complete all as specified and directed. Note :- (Application will be done with rollers through authorised applicator of company)

Material and labour preparing newly plastered surfaces of walls and applying three coats of white wash on walls complete all as specified and as directed.

Material and labour for preparing old plastered surfaces of walls and applying two coats of exterior emulsion paint (weather proof) on newly plastered wall surface over a coat of primer over two coat of wall care puty of 1.00-1.50mm thick complete all as specified and directed. Note :- (Application will be done with rollers through authorised applicator of company)

Material and labour for preparing old plastered surfaces of walls and applying two coats of emulsion distemper using roller over one coat of wall care putty of 2mm thickness complete all as specified and directed.

Material and labour complete remaoval of existing treatment by mechanical and preparation of surface by two coat of oil emulsion distemper using roller on old plastered wall surface over a coat of primer over wall care putty of 2mm thickness complete all as specified and directed

Material and labour preparation of old decorated plastered surfaces of ceiling and applying one coat of white washing complete all as specified and directed.

Material and labour (in repairs) 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls with necessary fittings such as clamp etc. complete all as specified & directed.

Material and labour in repair PVC (SWR) bends of 110 mm bore dia complete all as specified & directed.

Material and labour in repair 110mm bore PVC (SWR) Junction single, (Single T) Equal or unequal complete all as specified and directed.

Supply & fix in repairs 75 mm bore PVC (SWR) pipe in any length fixed to walls with clamps and laid in floors etc. complete all as specified and directed.

Supply & fix in repairs PVC bends, any radius suitable for 75 mm dia PVC pipes complete all as specified and directed.

Material and labour in repair 75mm bore PVC (SWR) Junction single, (Single T) Equal or unequal complete all as specified and directed.

Material and labour PCC 50 mm th 1:3:6 type C-2 (using 40mm graded aggregate) as in plinth protection/Path paving surface finished even and smooth without using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete of any description & in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Material and labour mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required and depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc half brick but not exc. one brick complete all as specified and directed.

Material and labour MS framed work such as grills, gratings, etc. to be fixed with existing steel window with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including cutting holes and fixed with PCC (1:2:4) Type B-1 using 20mm graded stone aggregate complete all as specified and directed.

Material and labour mild steel CP grating 100/125mm dia incl waste hole where required at site complete all as specified and directed.

Material and labour Door viewer (Magic hole eye) 25 mm dia and not less than 40mm long suitable for 30mm/35mm thick door shutter of any description including fixing of wooden cleats, rubber washer if required complete all as specified and directed

Material & labour for 75mm bore PVC floor traps plain with grating fixed in repairs including jointing with solvent cement complete all as specified & directed.

Material and labour 1mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Material and labour 110mm dia PVC(SWR) vent cowl complete all as specified and directed.

Material and labour for coloured chequered cement concrete tiles 20cm x 20cm x 20mm thick, set on CM (1:4), 12mm thick screed grouted with cement sand mortar 1:3 mixed with water proofing compound as per manufactures instructions and pointed in neat cement slurry in floors with grey cement and no pigment complete all as specified and directed

Material and labour for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base floor/paving complete all as specified and directed

Material and labour Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of steel grade Fe-290, E-165.

Material and labour 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Material and labour Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

Material and labour Providing PCC(1:2:4) type B-1 using 20mm graded stone aggregate as in cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.

Material and labour for mild steel framed work with hollow rectangular section (Weight to be measured at site per Rm) as in framework for chajja / sun shade etc at any height incl all necessary welding and fixed to wall by fastener and rawl plug complete all as specified and directed.

Material and labour Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Material and labour RCC (1:2:4) Type B-1 using 20mm Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour one coat of weather coat paint of red colour Apex (Ultima) or equivalent after preparation of surface complete all as specified and as directed.

Material and labour in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and PVC waste pipe 50mm dia with pressure rating 6 Kgf/Sq cm including MS cantilever brackets of 40 x 40 x 6mm angle iron and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make : Nirali, Diamond, Blue Star, Silver Sine & Shakti Enterprises

Material and labour stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.63mm thick stainless steel sheet after taking down old one complete all as specified and directed.

Material and labour vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste but incluing brackets, CP waste couping , PVC Waste pipe 32mm dia and 60 cm long etc complete all as specified and directed. Make : Cera, Parryware, Hindware

Supply & fix in repairs 50 mm bore PVC (SWR) pipe in any length fixed to walls with clamps bends and laid in floors etc. complete all as specified and directed.

Material and labour for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm th with pressed steel shutter 1mm th Godrej pattern fixed to masaonary wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arragement painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of syntetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter including taking down old existing wooden cup board framed with shutter and macking good disturbed portion in cm 1:3 or pcc 1:2:4 complete all as specified & directed disturbed portionin cm 1:3 or pcc 1:2:4 complete all as specified &directed (precast rcc sheleve shall be measured and paid seperatly.

Material and labour mild steel frame work fixed in wall as in cooler stand 02 Nos in each qtrs, 12 Nos in GF and 12 Nos in FF embedded in PCC 1: 2: 4 Type B-1 using 20 mm graded stone aggregate incl cutting holes 4 Nos for each cooler stand complete all as directed by Engr-in-Charge.

Taking down carefully any type of battens or conduit point wiring with batten / conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed .

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly for One tube light/Bulb point controlled by one, one way switch 05/06 Amps complete all as specified and directed.

All as per serial item No 132.00 above but for one ceilling fan/exhaust point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 132.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 132.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 132.00 above but with One bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 Sqmm complete all as specified and driected.

All as per serial item No 132.00 above but with One two point controlled by two, two way switches 05/06 Amps complete all as specified and directed.

All as per serial item No 132.00 above but with 2.5 Sqmm Nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Supply and fix switch piano flush type, 5/6 Amp single pole, one way 240 volts complete all as specified and directed.

Supply and fixing socket outlet 2 in 1, 5 Pin 05/06 Amps flush type 240 volts complete all as specified and directed.

Supply and fix switch piano flush type, 15/16 Amp single pole, one way 240volts complete all as specified and directed.

Supply and fixing socket outlet 2 in 1, 3 Pin 05/06 Amps and 15/16 Amps flush type 240 volts complete all as specified and directed.

Supply and fix switch piano flush type, 5/6 Amp single pole, two way 240 volts complete all as specified and directed.

Supply and fix stepped type electronic fan regulator flush AC, 230 volts, with and including connector complete all as specified and directed .

Supply and fixing bell push flush type, 5 Amps, 240 volts , AC complete all as specified and directed.

Supply and fixing call bell ding dong AC, 230 volts single pole complete all as specified and directed.

Supply and fix lamp holder (Angular/Straight), insulated body, with back plate for batten fitting all as specified and directed.

Supply and fix decorative wall light fixture made up of polycarbonate, suitable for 9/10 W LED lamp B22 base including 9/10 W LED lamp and including all accessoires for fixing of fitting on wall all as specified and directed by Engr-in-Charge Make Havells Model No -Globe Ordering Code- LHFOFUE1T/Z1W012 or equivalent in Crompton /Bajaj

Supply and fixing LED lamp 9/10Watts, CDL, with star rating all as specified and directed Make- Havells Cat Part No : LHLDUEBML8R009 orequivalent to CG/Havells/Wipro

Supply and fix LED fitting 1x9W / 1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix decorative LED tube light fitting 1x20 Watt, with opal diffuser, environment friendly, energy efficient MS batten with retrofit T8 polycarbonate tube rod LED 20W, single side connection 01 No, complete with all accessories and fixing material complete all as specified and directed.

Supply and installed LED security light fitting 1x45 Watt luminaries , die cast aluminium housing comprising high power LEDs, enclosed with lens embedded PC cover with LED driver complete IP 65 protection including provision of 32 mm dia GI pipe light grade mounting bracklet,0.80 m long, bend to shape at 140 degree and fixed to wall with 02 Nos 40x 5mm Flat iron clamps . nuts, bolts and washer etc and including weather proof PVC insulated copper conductor cable size 23/0.0076 twisted of required length for making connection complete all as specified and directed.

Supply and fix of ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified & directed .

Taking down unserviceable sub main / service main wiring including all cutting/chases etc in wall, making good to walls etc including two coats of white/colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified and directed.

Material and labour for sub main wiring with 2x6.00 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS cable with and including continuous earth wire of size 6.00 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note : One meter of conduit along with 2x6.00 sqmm wire and one 6.00 sqmm earth shall be measured as one unit length )

Supply and fix sheet metal enclosure for DB's VTPN 4 way, double door, 415 volt AC, with provision to mount 100Amp MCCB 4 pole as in comer and SP/DP MCB as out going complete all as specified and directed. Note:- MCCB & MCBs to be fixed in this DB will be measured and paid separately under relevant items.

Supply and fix MCCB 4 pole 100 Amps 16 KA, 415 Volts, 50 Hz with adjustable thermal & magnetic release and suitable frame size as to be fixed in VTPN DB at serial No 156.00 above, asll as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth in soft/ loose soil for foundation n.exc 10 Sqm on plan, including levelling of bottom surface to required level getting out complete all as specified and directed.

Removing excavated materials to a distance not exc 50 m and deposited where directed at a level not exc 1.5 m above the starting point all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm thick in soft / loose soil complete all as specified and directed.

Supply/laying and fixing 40 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches/fixed on pole/wall for cable protection complete all as specified and directed.

Material and labour for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling and hard punning complete all as specified and directed.

Material and labour for contineous brick edging with width equal to the length of the brick of whole sub class 'B' bricks laid on edge for protection of cable complete all as specified and directed.

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white/colour washing/distempering etc to match the existing surfaces complete all as directed .

Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed .

Supply and fixing MCB, SP, AC, 240 volts "C" curve capacity of 06 to 32 Amps, 10kA and making connections testing and commissioning complete all as specified & directed.

Supply and fixing MCB, SP, AC, 240 volts "C" curve capacity of 40 Amps, 10kA and making connections testing and commissioning complete all as specified & directed.

Supply and fixing MCB, SPN, AC, 240 volts "C" curve capacity of 40 to 63 Amps, 10kA and making connections testing and commissioning complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer-in-Charge.

Material and labour XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 vots grade, cross-sectional area 25 Sqmm 3.1/2 core laid in trenches, fixing on wall/under road crossing through protection pipe etc complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. (Note- After completion of work if desired result of earthing is not obtained the earthing shall be redone without any extra cost to Govt.)

Taking out old UNSV LT cable any type or size complete all as specified and directed.

Baggay construction Company

vibha associates

Shikha Enterprises

Manglam Engineers and Construction Co

R.D.Builders