Corrective electrical maintenance contract and overhauling etc. of 2 x 3.5 MLD ETP of Circular Railway near KOAA Station for 03 (Three) years.

1A-Non Schedule - ( Submersible sewage pumping set [MBH Pumps(Gujrat) Pvt.Ltd.] 3 Nos , Above/

Rewinding of motor with suitable insulated copper wire of similar size & gauge.

Replacement of motor bearing with similar new one.

Replacement of Oil Seal.

Replacement of pump bearing with similar new one.

Replacement of 'O' ring.

Welding, cutting, polishing, machining of impeller if required.

Welding, cutting, polishing, machining of shaft if required.

Replacement of thermostat.

Replacement of moisture sensor.

Replacement of nuts, bolts and washers.

Cleaning, overhauling, testing, fitting and painting of the pumping set

Lifting, lowering & commissioning of pumps. Unit

1B-1A-Non Schedule - (Submersible sewage pumping set [MBH Pumps(Gujrat) Pvt.Ltd.] 2 Above/

Rewinding of motor with suitable insulated copper wire of similar size & gauge.

Replacement of motor bearing with similar new one.

Replacement of Oil Seal.

Replacement of pump bearing with similar new one.

Replacement of 'O' ring.

Welding, cutting, polishing, machining of impeller if required.

Welding, cutting, polishing, machining of shaft if required.

Replacement of thermostat.

Replacement of moisture sensor.

Replacement of nuts,bolts and washers.

Cleaning, overhauling, testing, fitting and painting of the pumping set

Lifting, lowering & commissioning of pumps. Unit

1C-Non Schedule - (Submersible sewage pumping set [MBH Pumps(Gujrat) Pvt.Ltd.] 3 Nos , Above/

Rewinding of motor with suitable insulated copper wire of similar size & gauge.

Replacement of motor bearing with similar new one.

Replacement of Oil Seal.

Replacement of pump bearing with similar new one.

Replacement of 'O' ring.

Welding, cutting, polishing, machining of impeller if required.

Welding, cutting, polishing, machining of shaft if required.

Replacement of thermostat.

Replacement of moisture sensor.

Replacement of nuts,bolts and washers.

Cleaning, overhauling, testing, fitting and painting of the pumping set

Lifting,lowering & commissioning of pumps. Unit

2A-Non Schedule - (H S pump (Mather & Platt Pumps Ltd.) 3 Nos, Motor Make: ABB, Above/

Replacement of ball/ roller bearing with similar new one.

Replacement of sleeve bush.

Replacement of guide bush.

Replacement of Neck ring.

Replacement of water seal.

Replacement of coupling bolts & bush.

Replacement of check nut.

Painting, overhauling, servicing once in a year.

Lifting, lowering and commissioning of pump if required. Unit Above/

2B-Non Schedule - (Motor Capacity 20 HP)

Rewinding of motor with similar gauge of wire including heat varnishing etc. if required.

Replacement of motor bearing by similar new one.

Blowing, painting etc. once in a year. Unit

2C-Non Schedule - (Air Blower (Air Vac Industries & Project), 3 Nos, Mototr Make: ABB, Above/

Rewinding of motor with similar gauge of wire including heat varnishing etc.

Replacement of bearing by similar new one.

Blowing, painting etc. once in a year. Unit Above/

2D-Non Schedule - (H.S. Motor, 2 Nos, Motor Make: ABB, 3HP, Clarifaculator)

Rewinding of motor with similar gauge of wire including heat varnishing etc, if required.

Replacement of bearing by similar new one. Unit

2E-Non Schedule - (Replacement of starter contact, coil, Over Head Relay timer, preventor Above/

FASD Starter 3HP-2 nos

FASD Starter 10HP-3 nos

FASD Starter 12.5HP- 2 nos

FASD Starter 15HP-5 nos

FASD Starter 20HP-3nos

FASD Starter 40HP-3nos Unit

3F-Non Schedule - (Manning for operation & maintenance at ETP/KOAA- for three years)

Total man hours for Highly Skilled Staff (3 nos + 1 no Rest keeper) for 3 years [( 8 hrs per day x 3 nos 1 Highly-skilled x 7 days)= 168 man hours + (8 hrs per day x 1 no Rest keeper x 3 days)= 24 man hours; Total man hours for 7 days= 192, Hence Man hour for 1 day= 27.43. Total man hours for 1 year(365 days)= 10011.95 man hours. Hence Total man hours for 3 years= 30035.85]

Total man hours for Unskilled Staff (3 nos + 1 no Rest keeper) for 3 years [( 8 hrs per day x 3 nos un-skilled x 2 7 days)= 168 man hours + (8 hrs per day x 1 no Rest keeper x 3 days)= 24 man hours; Total man hours for 7 days= 192, Hence Man hour for 1 day= 27.43. Total man hours for 1 year(365 days)= 10011.95 man hours. Hence Total man hours for 3 years= 30035.85] Unit

3A1-Non Schedule - (Regular maintenance works for 03 years) (H.S Pump (Mathe & Platt

"Bi-monthly checking as per schedule below: a)Checking all nuts & Bolts, b)Replacement of Packing, c)Checking of abnormal sound." Unit

3A2-Non Schedule - (Air Blower (Air Vac Industries & Project), 3 Nos, Motor Make: ABB, Above/

Bi-monthly checking as per schedule below: a) Tightness of nuts & Bolts, b) Tightness of coupling bolts, c) Greasing/ oiling of bearing etc. Unit Above/

3B1-Non Schedule - (Motor)

Bi-monthly checking as per schedule below: a) Tightness of nuts & Bolts, b) Tightness of coupling bolts, c) Greasing/ oiling of bearing etc. Unit

3B2-Non Schedule - (Air Blower (Air Vac Industries & Project), 3 Nos, Motor Make: ABB, Above/

Bi-monthly checking, servicing, cleaning & tightening etc. Unit

3C1-Non Schedule - (H.s Motor, 2 Nos, Motor Make: ABB, Motor Load: 3HP, Capacity: 3HP, Above/

Bi-monthly checking as per schedule below: a) Tightness of nuts & Bolts, b) Tightness of coupling bolts, c) Greasing/ oiling of bearing etc. Unit

3C2-Non Schedule - (FASD Starter, 3HP=2nos, 10HP=3Nos, 12.5HP=2nos, Above/

Bi-monthly checking, cleaning, tightening etc of the above starter, 40HP/40A, 3Phase.

Bi-monthly checking, cleaning, tightening etc of the above starter, 20HP/15HP/12.5HP /10HP/ 3HP, 3 Phase. Unit

3E1-Non Schedule - (Submersible De-watering pumping set, 2 nos, Load: 10HP,415V, Above/

Rewinding of motor with suitable insulated copper wire of similar size & gauge.

Replacement of motor bearing with similar new one.

Replacement of Oil Seal.

Replacement of pump bearing with similar new one.

Replacement of 'O' ring.

Welding, cutting, polishing, machining of impeller if required.

Welding,cutting,polishing,machining of shaft if required.

Replacement of thermostat.

Replacement of moisture sensor.

Replacement of nuts,bolts and washers.

Cleaning,overhauling,testing,fitting and painting of the pumping set

Lifting,lowering & commissioning of pumps.