GE/Token-07/2025-26

Amount

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc up to 10m height complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete.

M&L for rendering 10mm thick in CM 1:6 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete.

M&L for rendering 5 mm thick in CM 1:4 on ceiling other than fair faces of brick work or concrete surfaces finished without using extra cement complete.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specifed as direted by Engr-in-charge.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper over a 1-2 mm coat of wall care putty complete all as specified.

M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Complete removal of existing treatment by scraping, rubbing , brooming down,washing with water etc of old decorated surfaces plastered or unplastered surface of wall and applying two coat of oil bond distemper over one coat of putty on wall complete all as spcefied and as directed by Engr-in-charge.

M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing treatment by rubbing, brooming down,washing with water etc and applying two coat of cement based paint complete all as specified and directed.

M&L for Preparation of old surfaces (Plastered or un-plastered) of ceiling and applying two coats of oil white wash bound distemper complete all as specified.

M&L preparation of Old or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M & L for preparation of Old or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc., all as directed.

M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks,old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed.

Demolition Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premiseof stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

M & L for coloured non skid ceramic tiles of size 300x300x 7-8mm as in floors, set and jointed in neat cement slurry as per manufacturers instructions and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:6, complete all as specified.

M & L for coloured ceremic tiles of size 600 x 600 x 8-9 mm thick as in floor over 15mm thick screed bed 1:6 in cement mortar, set and jointed in white cement with pigment to match all as specified and directed.

M & L ceremic tiles coloured of size 600 x 100 mm x 8-9 mm thick on vertical surfaces as in skirting etc over 10mm thick backing coat in CM 1:4, set and jointed in white cement with pigment to match all as specified and directed.

M&L for glazed ceremic colour tiles (600x300x7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

Dismantling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2 1:3:6 (20mm graded aggreate)in sub base, filling and mass concrete.

S&F Endura colours paving tiles 300cm X 300cm x 15-20mm double charged digital printed with gloss, polished matt finished jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type and also taking down cement plaster on brick/concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified land as directed. Make: Asian Paints or equivalent in Sikka, Fosroc and STP Ltd. Note: The application shall be executed on any type of surface and on horizontal/Vertical areas.

M&L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary [coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile/fibre, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Notes for item Nos 27 and 28: (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator will be submitted by contractor immediately after placing of work order. (d) A guarantee amount of 5% of contract of work done for item Nos 27 & 28 of BOQ will be retained for 5 years of the completion of work.

M&L for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethelene and polyethylene ball including taking out existing unserviceable overhead tank of any description including fitting and fixtures complete all as specified.

M and L for rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and nipple fixed in position, with 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description.

M & L for PCC 40 mm thick (Avg thickness) type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in roof complete all as specified and directed.

Schedule of Credit

M/S GR construction compony (BID ID -3313458)

M/S MANINDER CONSTRUCTION CO. (BID ID -3314549)

M/S VERMA BUILDER (BID ID -3314449)

imran construction company (BID ID -3314487)

M/s M M BAHL (BID ID -3314541)

POONAM ENTERPRISES (BID ID -3314158)

a.k constructions (BID ID -3310575)