Providng and laying Water Supply Pipeline Water Connecton and Distribution System and Construction of Inlet Channel at Water Supply Scheme Kangar Block Bhagta Bhaika at Bathinda District Bathinda

Item Wise Description :

Carriage of Surkhi, sand, bajri, ballast, stone, boulders, kankar, building rubbish Carriage of material excluding initial lead of 5 Km a) Jalalabad Sand (Av. Lead 130 Km) Up to 40 km CSR Item No. 5.2 (i)

41 km to 60 km (CSR Item No. 5.2 (i))

61 km to 130 km (CSR Item No. 5.2 (i))

(b) Gagger Sand (Av Lead 340 Km.) Up to 40 km (CSR Item No. 5.2 (i))

41 km to 60 km (CSR Item No. 5.2 (i))

61 km to 150 km (CSR Item No. 5.2 (i))

150 km to 340 km (CSR Item No. 5.2 (i))

(C ) Bajri (Av Lead 340 Km.) Up to 40 km (CSR Item No. 5.2 (i))

41 km to 60 km (CSR Item No. 5.2 (i))

61 km to 150 km (CSR Item No. 5.2 (i))

150 km to 340 km (CSR Item No. 5.2 (i))

Excavation in soil (any type) using Hydraulic Excavator CK 90 and Tippers with Disposal upto 450 metres. Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead up to 450m. (CSR Item No. 6.21)

Centring and shuttering for faces of wall partion, retaining wall (vartical or batering) including attched pillars etc. (CSR Item No. 9.2 )

Centring and shuttering for sides & soffits of beam, beams launchings, girders bressumers, lintels etc. (CSR Item No. 9.6)

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. (CSR Item No. 9.8)

Cement concrete 1:4:8 with stone aggregate 40mm gauge using concrete mixer volumetric type. (CSR Item No. 10.10 (b) ii)

Reinforcement cement concrete M -30 Mechanical batch mixed using batch type concreate mixer as per IS : 1791 and vibrator by needly vibrator but excluding steel reinforcement centering and shuttering in super structure. (CSR Item No. 10.23)

First Class brick work in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. (CSR Item No. 11.6)

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc. (CSR Item No. 13.13)

Providing and fixing cast iron 100mm dia, rain water pipe with screw and wooden plugs fixed on wall-face, including filling joints with spun yarn and cement mortar 1:2 excluding head and shoe etc. (CSR Item No. 13.41)

Providing and fixing cast iron head for rain water pipe on wooden plugs fixed on wall-face including filling the joints with spun yarn and cement mortar 1:2. (CSR Item No. 13.42)

Providing and fixing cast iron shoe for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2. (CSR Item No. 13.43)

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16. (CSR Item No. 13.45)

Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3. (CSR Item No. 13.51)

12.5mm C.P. 1:2. (CSR Item No. 15.7)

Cement rendering on plaster 1mm thick. (CSR Item No. 15.48)

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. (CSR Item No. 16.14)

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. b) With Ordinary Quality Paint (CSR Item No. 16.17)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. b) With Ordinary Quality Paint (CSR Item No. 16.18)

Wrought iron & mild steel ladder, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts & nuts or screws or welding rod, complete ficed in position (CSR Item No. 18.4)

Bolts and nuts of all sizes and length required. (CSR Item No. 18.15)

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete. (CSR Item No. 18.18)

Excavation by mechanical means (JCB) or Hydraulic excavator ) in trenches for pipe line with straight or open cutting in streets or open area including trimming and dressing sides, levelling of beds of trenches to correct grade, cutting joint holes, refilling; consolidation and watering including the cost of dewatering of rain water, diversion for traffic, night signals, providing & fixing caution boards, corrsing over trenches for access to the houses watching, fencing etc and removed of surplus soil out side/inside the town involving lead upto 15 meter complete in all respects. (a) Earth work upto 1.5 mtr depth for In all classes of soil except rocky. (CSR Item No. 28.2)

Suppling and fixing of ISI Marked CI D joint (Complete with nut bolts and rubber ring) as per IS : 8794 for repair of pipe line including cutting jointing and testing etc but excluding cost of excavation complete. a) 80 mm (CSR Item No. 28.10)

Providing, Laying,Fixing & Jointing of P.V. C Pipes as per ISI- 4985 (ISI marked with prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 6kgf. / sqcm 160 mm o/d (CSR Item No. 28.13 (xvi))

Providing, Stringing out, Cutting, jointing and testing of ISI marked DI Double flanged Pipes with screwed, flanged as per IS 8329-2000, Class K-9 and laying the same in trenches to correct alignment and gradients, jointed with nut bolts & rubber insertion joints fitted complete including all cartage. a) 80 mm i/d pipe lines laid complete (CSR Item No. 28.23 )

e) 200 mm i/d pipe lines laid complete (CSR Item No. 28.23 )

Providing & fixing CI/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts slucie valves ISI marked, 14846-2000, including jointing, testing & cost of Nut, bolt & insertion sheet all carriage complete (with the approval of Engineer-in-charge). A) Class PN-1 as per ISI a) 80mm i/d Sluice Valves Flanged (CSR Item No. 28.27)

Providing and fixing GI union coupling (of approved make with approval EIC ) as per IS 1879 in GI pipe lines complete in all respect e) 40 mm i/d GI union (CSR Item No. 28.40)

Construction of masonary Sluice Valve Chamber excluding sluice valve cover as per standard design & drawing of public health department. b) 0.90x 0.90 mtr. (CSR Item No. 28.66)

Providing and fixing S.S Pressure Gauge complete as required complete in all respects. a) Dial dia mater 150mm calibration 0-16 kg (CSR Item No. 28.121)

Providing and fixing in position Cast Iron Foot valves flanged ends with rubber sheat as per IS 4038 including cost of Nut Bolt , rubber insertion complete in all respect e) 150 mm i/d cast iron foot valves (CSR Item No. 28.131)

Proving & fixing 560mm ,500 mm,450 mm internal diameter circular or 450 mm x 600 mm clear inside opening rectangula RCC manhole cover & frame ISI marked as per IS 12592-2002 including carriage from the store of Engineer -in -charge to site of work loading unloading including stacking and setting the same to correct lines over manholes including cement conc copping (M20) around the frame etc dia of steel for lifting hook is 16 mm (for EHD and HD) A) 560 mm i/d RCC Mahole cover with frame b) Heavy Duty (CSR Item No. 29.36)

Wiring in PVC insulated copper conductor single core FRLS cable (ISI marked), 1100volts grade to be laid in heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked i) Wiring fan point with sheet metal fan box (shape hexagonal & sheet thickness not less than 1.60 mm) in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (socket size). (CSR Item No. 33.03)

ii) Wiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade. (CSR Item No. 33.03)

vi) Wiring 3 pin 16/20 amp. power plug control and switch. (CSR Item No. 33.03)

GALVANIZED IRON PIPES AND G.I. EARTHING: Supply & erection of G.I. pipe for wiring purposes including bends, inspection boxes etc., where necessary including painting as per PWD General Specifications 2010:- a) Earthing of Sheet metal/ iron clad Switches and metallic cases etc., with No. 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe partly recessed and partly on surface complete with 135cm long 50mm dia. G.I. earth pipe with G.I. reducing socket (50mm x 15mm) including erection of the same, 10 metre below ground level with necessary charcoal & salt mixture etc., up to 13 metre in length (including boring & refilling). (CSR Item No. 33.13 (ii))

Non Schedule Items NS) Supplying and fixing 200mm i/d Galvanized iron sheet floating arm 5.20 mtr long including sluice valve, survivel bend, floating drum, extended rod with hand wheel.

NS) Taking out & Washing Filter Media & Placing the same in filter Beds

NS) Providing. installing, testing of commissioning One No Electronically actuated Diaphragm operated .Metering system Chemical Doasing Chlorinator suitable for delivering 0.5 to 6 ltr of Bleaching Powder solution / Sodium Hyposolution per hour under maximum delivery pressure upto 7 kg cm 2 and sunction lift not less then 1.5 mtr as per DWSS standered

NS) Providing & Fixing 100mm i/d C.I. T - TYPE / Rose ventilator complete in all respects.

NS) Providing , installing and commissioning of 1 No. electrically centrifugal driven pump set capable of delivering 390 LPM against a head of 6 mtr. along with electric pannel board consisting of electric appliances such as automatic star delta push button or oil imersed starter, main switch bolt meter, Ampere meter, ELCB, shunt capactor, single phase preventor, indicating lamps, kit kat etc.including cost of electronic over current relay complete in all respects. a) Raw Water Pumping Set at Sump Discharge 390 LPM 6 mtr. Head

NS) Dismantling brick of flanged stone flooring without concrete base and recondition.

NS) Providing & fixing barbed wire fencing 3 ply rating with angle iron pickets with M.S. clips including labour for stretching of barbed wire & cost of clips.

NS) Provision for making Water Connection to house hold which fall on propesed/existing water supply pipe line i.e. Providing & fixing MS clamp, GM feerule, GI 20 mm i/d 2.50 mtr and specials. complete in all respects.

NS) Provision for connecting the Proposed pipe with Exising pipe line any size including the cost of Excavation, Bailing out water, upvc Tee, Bend/Elbow Socket/ pipe piece / D joint etc complete in all respects.

NS) Providing & Fixing C.I. assembly & flanged for CI sluice valves & CI bends complete in all respect i) 80 mm i/d

NS) Providing, Laying,Fixing & Jointing of P . V. C Pipes 6 Kg f/sqm ISI Marked as per ISI- 4985 along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.including specials & excavation for pipe line in trenches and pits upto required depth and cover on pipe minimum 1 mtr. with earth etc. complete in all respects. b) 90 mm o/d

NS) Provision for internal wiring for machinery with PVC insulated copper wire in PVC pipe.

NS) Provision for making foundation for raw water set.

NS) Providing & fixing Rubber Jain complete in all respects