CA No CWE/PM/SP-19/2020-21

Amount

GENERAL SUMMARY (PART-I TO VIII)

Lump sum price worked out by the tenderer for Building Works as listed in Sch `A’ Part-I.

Lump sum price worked out by the tenderer for Earth work as listed in Sch `A’ Part -II.

Lump sum price worked out by the tenderer for Internal Water Supply as listed in Sch `A’ Part -III.

Lump sum price worked out by the tenderer for Internal Electrification as listed in Sch `A’ Part -IV.

Lump sum price worked out by the tenderer for External Electrification as listed in Sch `A’ Part -V.

Lump sum price worked out by the tenderer for External Water Supply as listed in Sch `A’ Part -VI.

Lump sum price worked out by the tenderer for Road/Path/Culvert as listed in Sch `A’ Part -VII.

Lump sum price worked out by the tenderer for Sewage Disposal as listed in Sch `A’ Part -VIII.

SCHEDULE 'A' PART-IX (MISCELLANEOUS ITEMS) Note: This Schedule is not pre-priced by MES and the pre-priced rate indicated as "0.00" under Column 6 signifies this fact only.

Internal Electrification S&F Lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting including LED Bulb of 5Watts complete, all as specified and directed by Engineer-in-Charge.

M&L for LED tube light fitting 1x20 watts, 230 Volts surface mounted complete with LED Driver, spring loaded bipin holders, connector block, etc complete with all accessories internally prewired with suitable cable size including 4 feet tube light rod (1x20 watts) and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.50 sqmm 3 core complete, all as specified and directed by Engineer-in-Charge.

M&L for LED tube light fitting 1x9 watts, 230 Volts surface mounted complete with LED Driver, spring loaded bipin holders, connector block, etc complete with all accessories internally prewired with suitable cable size including 2 feet tube light rod (1x9 watt) sand connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.50 sqmm 3 core all as required at site complete, all as specified and directed by Engineer-in-Charge.

S&F Wall mounted Bulk head fitting in die cast aluminium housing & frosted glass with 09 watt LED bulb complete, all as specified and directed by Engineer-in-Charge.

S&F ceiling fan 5 star rated (as per BEE recommendation)1200 mm sweep suitable to work on single phase AC 230 volts, 50 Hz supply complete with electronic regulator step type, Hum-free, suitable to control speed of fan 0 to 100% connecting electrically to ceiling rose or connector block using PVC insulated and overall sheathed 3 core cable of size 0.75 Sqmm with flexible copper conductor all as required at site complete, all as specified and directed by Engineer-in-Charge.

S&F wall mounted fan 5 star rated (as per BEE recommendation)300 mm sweep suitable to work on single phase AC 230 volts 50 Hz supply complete with electronic regulator step type, Hum-free, suitable to control speed of fan 0 to100% of connecting electrically to ceiling rose or connector block using PVC insulated and overall sheathed 3 core cable of size 0.75 Sqmm with flexible copper conductor all as required at site complete, all as specified and directed by Engineer-in-Charge.

S&F heavy duty exhaust fan 5 star rated (as per BEE recommendation) 300mm sweep single phase 230 volts, 50 Hz AC supply totally enclosed heavy duty motor with die cast aluminium rotor mounted on two ball bearings complete louvers including cutting chases for fixing fan, connecting electrically using 3 core 0.75Sqmm PVC insulated flexible copper conductor cable over all sheathed complete, all as specified and directed by Engineer-in-Charge.

S&F heavy duty exhaust PVC fan 5 star rated (as per BEE recommendation) 230mm sweep single phase 230 volts, 50 Hz AC supply totally enclosed heavy duty motor with die cast aluminium rotor mounted on two ball bearings complete louvers including cutting chases for fixing fan, connecting electrically using 3 core 0.75Sqmm PVC insulated flexible copper conductor cable over all sheathed all as required at site complete, all as specified and directed by Engineer-in-Charge.

M&L for MCB single pole 240 volts 6 to 32 Amps, with rupturing capacity 10 KA, "C" Curve type complete, all as specified and directed by Engineer-in-Charge.

M&L MCB single pole & neutral 240 volts 40 Amps,with rupturing capacity 10 KA "C" Curve type, complete, all as specified and directed by Engineer-in-Charge.

M&L MCB single pole & neutral 240 volts 10 to 32 Amps,with rupturing capacity 10 KA "C" Curve type complete, all as specified and directed by Engineer-in-Charge.

M&L for Earthing complete with galvanised steel earth plate electrode of size 600x600x6mm thick buried directly in the ground vertically to a depth not less than 2.25 Mtr below the ground level with the top edge of earth plate, not less than 1.5 Mtr below the ground level connected using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil removing surplus excavated material as specified in Electrical Plate No 3 of SSR part I 2009 complete, all as specified and directed by Engineer-in-Charge. Notes :- (i) 20 mm dia GI pipe medium grade for watering to be provided with a socket and plug and should be 30 cms above ground level. (ii) GI strip connecting upto HT panel is included in this item. (iii) GI pipe 15 mm dia light grade protection pipe shall be provided upto Ground level.

S&F street light fittings LED type, 1x25 Watts made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP66 protection and impact resistance IK07 and accessories complete and connecting electically using cable PVC insulated 1.5 Sqmm from DB to street light including GI bracket made of GI tubing 40mm, clamp, nuts & bolts required for fixing bracket complete, all as specified and directed by Engineer-in-Charge.

External Electrification S&F LED flood light revolving type 250 watt IP 66 single piece pressure die cast powder coated housing & lamp frame with toughened glass cover, equipped with secondary optical lens for superior light distribution, efficiency 100Lm/W in CCT 5700K including mounting and 360 degree rotating arrangement as per site requirement complete, all as specified and directed by Engineer-in-Charge.

S&F MCB, SP, 6-32A , 240 Volts, 10KA complete, all as specified and directed by Engineer-in-Charge.

S&F sheet metal enclosure for DP MCB suitable for DP complete, all as specified and directed by Engineer-in-Charge.

External Water Supply Cutting existing GI/CI tubing for alterations or additions (each cut measured) to existing GI tubing for alteration or addition to pipe line of GI 20/40 mm bore with new fitting, tee and fixtures complete, all as specified and directed by Engineer-in-Charge.

Screwing existing GI/CI tubing for alterations or additions of size 20 to 40 mm bore GI tubing (or lentherning screw on pipe to form connector) complete, all as specified and directed by Engineer-in-Charge.

Sewage Disposal S&F steel fibre reinforced (SFRC) manholes covers with frames (medium duty) of 560 mm dia or rectangular of equivalent area complete, all as specified and directed by Engineer-in-Charge.

Shivom Projects Private limited