Work of attending break downs, Construction/Strengthening ,re arrangements, replacement and repairing of 11 K.V. and LT, O/H and U/G Lines and other as in tender Doc. against M and R Works under EUDC-I, Kesco, Kanpur.

Electrical work :

Strengthening of damaged pole by providing and welding of pipe or angle by over lapping in the place of damaged portion/Grouting of pole/Plinth of Pole

Laying of Aearial Bunched Cable of damage Line after laying stringing of LT Line

Loading carriage and Aearial Bunched Cable from store to work site and vice versa.

Laying of Aearial Bunched Cable for Erection of L.T. O/H Line

Re-sagging of conductor, on old line after erection of pole binding of conductor etc.

Opening of H.T. Jumpers from the existing 3 Phase 3 Wire H.T. O.H. line for erection work.

Opening of L.T. Jumpers from the existing L.T. O.H. line for erection work.

Fabrication and ercetion of distribution T/F fencing of frame size 3×2.4 Mtr. Including cost of M.S. angle size 40×40×5 and M.S. flat size 35×5, fixing of welded steel wire fabric on steel frams by welding of 10 SWG wire fabric, including Painting of two coats of paint on iron based surfaces with ready mixed Paint to give bus green shade including evening of oil & dust.

Repairing of Distribution Transformer Fencing with all material and painting.

Jumpering of H.T. Lines from existing H.T. O/H line.

Jumpering of L.T. Lines from existing L.T. O/H line.

Construction of T/F plinth, suitable for mounting of distribution transformer size of the plinth will be 1.2×1.2×1.2 meter solid with brick work. 75mm. Thick C.C. in ratioo 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75mm. Thick done on all the exposed sides to the plinth.

Repairing of transformer plinth size of plinth will be 1.2x1.2x1.2 mtr. solid with brick work. 75mm. Thick C.C. in ratioo 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75mm. Thick done on all the exposed sides to the plinth.

Kamadgeri Traders

S.A. Enterprises