GE/PNH-58/2022-23

Amount

B/R PORTION: Cleaning of blockage of Indian / european type WC up to first manhole and making the drain pipe of any dia fully functional by flushing with water to entire satisfaction of Engr-in-Charge including disposal of sludge outside the periphery of defence land at his own arrangement where sanitary hazards do not take place as per directions/ instructions of civil authority and burried in excavated pits complete all as specified and directed. Note:- Unit rate quoted by tenderer shall include clearing blockage, taking out sludge(liquid/semi liquid/solid ) , excavation of borrow pits for dumping sludge ,removing including loading/unloading and transportation etc.

Cleaning of blockage of Floor/Nahni/vermin trap of Kitchen/ Bathroom/basin/sink/urinal etc upto & including gully trap by using hand pump with bucket or manually by rodding till clear flow of water is observed and removing the deposited sludge/solid/liquid material outside MOD land, complete all as specified and directed.

Cleaning of blockage of under ground sewer lines of any dia of pipe including manholes, gully traps etc. by means of cleaning by roding from manholes to manholes / inspection chamber to manholes / gully trap to inspection chamber and flushing after cleaning, taking out sludge collected in manholes, removing & depositing the same outside the periphery of defence land in the pit at a minimum distance of 50 m from nearby living accn and covering the sludge in pit with earth and finally spraying unslaked lime, dry, around the manholes and cover the pit, complete all as specified and directed. Note:-Cost of taking out sludge, transporting of sludge out side the defence land, earth work & deposition in the pit with & including removing of shrubs, grass, small roots etc around manhole, inspection chamber etc where required is deemed to be included in the unit rate to be quoted by tenderer.

Cleaning of blockage of under ground sewer lines of any dia of pipe by breaking / puncturing of pipe line including excavation in type of soil to depth upto 3mtr deep, removing the blockage and making good the pipe line bedding with PCC 1:3:6 and returing filling the earth excavated incl redressing with & including disposal of soil/foreign materials outside the periphery of defence land at his own arrangement complete all as specified and directed.

Opening of cover(of any description and size) of septic tanks and soakage wells/pits, desludging/dewatering of septic tanks and soakage wells/pits of any size and depth by Manually operated machine (where approach of veh is not feasible) making it fully functional to the entire satisfaction of Engr-in -Charge and removing sludge outside the periphery of defence land at bis own arrangement where sanitary hazards do not take place as per directions/instructions of civil authority and burried in excavated pits and covering the same including refixing covers after cleaning complete all as specified and directed. Note:- Unit rate quoted by tenderer shall include taking out sludge from line and manholes(liquid/semi liquid/solid) excavtion of borrow pits for dumping sludge, removing including loading/unloading and transportation etc

Opening of cover(of any description and size) of septic tanks and soakage wells/pits, desludging/dewatering of septic tanks and soakage wells/pits of any size and depth by Mechanical pumping truck mounted (having minimum storage capacity of 2500 ltrs) and making it fully functional to the entire satisfaction of Engr-in -Charge and removing sludge outside the periphery of defence land at bis own arrangement where sanitary hazards do not take place as per directions/instructions of civil authority and burried in excavated pits including spraying of lime over filling including refixing covers after cleaning complete all as specified and directed. Note:- Unit rate quoted by tenderer shall include taking out sludge from line and manholes(liquid/semi liquid/solid) excavtion of borrow pits for dumping sludge, removing including loading/unloading and transportation etc.

Cutting and demolition of exising SGSW sewer pipe in damaged portion alongwith concrete bedding including removing unsv materials from site as directed and providing SGSW drain pipe grade 'A' placed in position and jointed with existing sewer line in CM 1:1 including packing under and haunching against the sides of pipe with PCC 1:3:6 type C-2 using 40 mm graded stone aggregate for 100mm internal dia of sewer line, complete all as specified and directed. Note:- Earthwork like excavation, returning filling and removal required for the repair of said work shall be inclussived in the rate quoted by the contractor

All as per item No- 07 above but for 150mm dia pipes, complete all as specified and directed.

Repairs to Rat / mouse holes to the faces / surfaces of manhole by making good to wall surface, benching, drains / channel etc of sectional area not exc 150sqcm each and depth n.exc 25cm each and filling the same with plain cement Concrete 1:2:4 type-B-1 (using 20mm graded crushed stone aggregate) and finished the surfaces even and fair, complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified and directed.

Taking down cement plaster of any description on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces with mixing with water proofing compound as per manufacturer's instruction & finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note:- WPC shall be measured & paid seperately under relevent item.

Supply only liquid Integral water proofing compound confirming to SI: 2645-1975 specifiaction complete all as specified and directed. Make: Pidilite/Sika/Fosrock/IWL India Limited

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically described complete all as specified and directed.

M&L for cement concrete (1:2:4) using 20mm graded stone aggregate as in lintels upto 1.5 metre clear span, cills, steps, siesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, bed block, kneelers, apex stones, bed plates, roof kerbs round or chamfered on edges, water troughs and the like including weathering, slightly rounded or chamfered angles and throatings etc including necessary form work complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically described (reinforement cut as required to facilitate demolition), complete all as directed by Engineer-in-Charge.

M&L for precast reinforced cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:6) including necessary form work complete all as specified and directed by Engineer-in-Charge. Note:- Reinforecement shall be measured & paid seperately under relevent item.

M&L For RCC (Nominal Mix) 1:2:4 type B-1, 20mm graded aggregate,Slabs supported on walls beams and columns in floors, roofs,landings, balconies,canopies,deck slabs and in shelves complete all as specified and directed.

Formwork to soffits of suspended slabs,floor slabs,landings and similar work not exceeding 200mm thick on flat surfaces complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars, 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia, complete all as specified and directed.

E/M PORTION: Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

Taking down carefully unsv main switch / DBs alongwith MCBs any type / capacity and making good disturbed surface to match with the existing surface, complete all as specified and directed.

M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following:-

One light/fan point controlled by one way switch 6 Amp complete all as specified and directed.

One ligh point controlled by two, two way switch 6 Amp complete all as specified and directed.

One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.

One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.

All as per srl item No 25 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire complete all as specified and directed.

S&F in repair ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC/poly carbonate, insulated body, complete all as specified and directed.

S&F in repair switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.

S&F in repair switch piano flush type 6 Amp, two way, (ISI marked), complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin, 5 Amp flush type universal, complete all as specified and directed.

S&F in repair Switch socket multipurpose combination 2 in 1, 5 pin, 6 Amp flush type universal, complete all as specified and directed.

S&F in repair Switch socket outlet multipurpose combination 2 in 1, 6 pin, 5 and 15 Amp flush type universal, complete all as specified and directed.

S&F in repair Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed.

Supply and fixing Inverter LED batten 20 W with square profile and polycarbonate channel, lithium Ion battery with charging time 8 hours-10 hours and backup time upto 4 hours with driver holder including LED tube light connecting up with with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make - Havells Cat part No-LHEXACP7FN1W020 or equivalent make as specified in PS.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair surface mounted square LED panel of size 192mm x 192 mm x 23mm, aluminium die cast body with premium diffuser to ensure glare free & even distribution of light , of 18 watt capacity , lumen output 6000K, with pre-wired fitting complete all as specified and directed. Make : Havells cat part No. LHEAAWP7IL1WO18 or equivalent of make as mentioned in PS

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing in repair LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F in repair LED tube light 20 watt Glamax LED 20 Watt TW smart batten complete with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make - Havells Cat part No-LHLDAMNDUA8R020 or equivalent Make as specified in PS.

S&F in repair LED 9 watt inverter lamp (B22 CDL) with holder base, complete all as specified and directed. Make of LED lamp:- Havells cat part No LHLDEUEEML8R010 or Equivalent cat part of make as specified in P.S.

S&F sheet metal enclosure for DBs, vertical TPN double door (IP43), 4 ways built in bus bars suitable for 415 volts, AC, 50 Hz and suitable for FP MCCB as incommer and out going SP/TP MCBs complete all as specified and directed. Note:- MCBs shall be measured and paid separately.

S&F sheet metal enclosure for DBs, SPN double door (IP43), 4 ways built in bus bars suitable for 240 volts, AC, 50 Hz , including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F sheet metal enclosure for DBs, SPN double door (IP43), 8 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F sheet metal enclosure for DBs, SPN double door (IP43), 12 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F in repair MCB TPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed. Make:-Havells cat part No- DHMGCTNF040 - DHMGCTNF063 or Equivalent cat part of make as specified in P.S.

S&F in repair MCB SPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed. Make:-Havells cat part No- DHMGCSNF040 - DHMGCSNF063 or Equivalent cat part of make as specified in P.S.

S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed. Make:-Havells cat part No-DHMGCSPF006-032 or Equivalent cat part of make as specified in P.S.

S&F in repair of PVC counduit non matalic rigid, of size 25 mm dia (external) incl all accessories use for fixing of conduit on wall and ceiling etc, complete all as specified and directed.

S&F in repair PVC casing caping of size 25 mm incl all fixing accessories complete all as specified and directed.

S&F in repair Sub main wiring with single core cable 2x 6 Sqmm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including surface PVC casing caping medium grade alongwith 1x 6 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly, complete all as specified and directed. Note:-Three wire of 6 Sqmm and one run of pvc conduit/casing caping shall be measured as one unit.

S&F 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia GI suspension wire, one twin core cable flat or circular of size 6 Sqmm 2 core & including taking down old old unsv service cable connection, complete all as specified and directed.

S&F 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia GI suspension wire, one twin core cable flat of circular of size 10 Sqmm 2 core including taking down existing old service connection, complete all as specified and directed.

Repair and maintenance of unserviceable ceiling fan of 1200mm/1400mm sweep at contractor's work shop, incl dismantling complete the ceiling fan parts, inspecting serviceability of all the parts, refixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, bracket, rubber bush, connecting wire, PVC connector, aluminium clamp for rod, bracket, bush rod, greasing/oiling etc assembling, cleaning and testing of ceiling fan complete all as specified and directed. Note: (i) Unserviceable parts as above shall be measured and paid separately under relevant items No 55 to 62 of Sch 'A' as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'. (iii) Cost of minor part i.e. Cotter pin, screws shall be deemed to included in the cost of quoted rate.

Supply only bearing good quality for ceiling fan 1200mm/1400mm sweep ISI marked complete all as specified and directed.

Supply only Gun metal bush for ceiling fan 1200mm/1400mm sweep complete all as specified and directed.

Supply only capacitor 2.5 mfd ISI marked complete all as specified and directed.

Supply only brass bracket assy for hanging the ceiling fan 1200mm/1400mm sweep complete all as specified and directed.

Supply only stator shaft for ceiling fan complete all as specified and directed.

Supply only fan blade for ceiling fan 1200 mm sweep of existing make complete all as specified and directed.

Supply only fan blade for ceiling fan 1400 mm sweep of existing make complete all as specified and directed.

Supply only canopy (top/bottom) of ceiling fans any make /size of colour matching with existing canopy/ fan colour complete all as specified and directed.

M&L for removing of old burnt winding of any size , type and rewinding of stator winding with superior quality copper wire with insulation complete all as specified and directed.

Repair and maintenance of unserviceable exhaust fan of any cap and sweep by dismantling the exhaust fan parts, inspecting the serviceability of parts, refixing of serviceable parts after cleaning, replacement of unerviceable parts i.e. beaing, bush, capacitor, connecting wires, fan blade, locknut, rubber pad etc, oiling/greasing, cleaning and testing of exhaust fan complete all as specified and directed. Note: (i) Unserviceable parts replaced shall be measured and paid separately under relevant items No 65 to 67 of Sch 'A' as supply only. (ii) Rewinding of stator winding shall be measured & paid for separately under relevant item of Sch 'A'. (iii) Cost of minor part i.e. screws shall be deemed to included in the cost of quoted rate.

Supply only double ball bearing (ISI marked) for exhaust fan of 200 mm sweep to 450 mm sweep fan complete all as specified and directed.

Supply only gun metal bush for Exhaust fan of any capacity. complete all as specified and directed.

Supply only blade of exhuast fan of 200 mm sweep to 450 mm sweep as per existing make complete all as specified and directed.

M&L for rewinding of 450mm sweep exhaust fan motor with superior quality copper winding wire with insulation complete all as specified and directed.

M&L for rewinding of 300mm sweep exhaust fan motor with superior quality copper winding wire with insulation complete all as specified and directed.

M&L for preparation of painted surfaces of exhaust fan of any make and size by scrubbing old and applying one coat of synthetic enamel paint by spray painting complete all as specified and directed by Engr-in-Charge.

Disconnecting electric & water connection to geyser of capacity 25/35/50 litr, taking down from existing position, dismantling and inspecting all the parts for its serviciability, cleaning of serviceable parts i.e. heating element, base assembly, connecting lead, thermostat, electric contact, electric wiring, indicators, safety valves etc re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Notes: (i) The defective parts to be replaced shall be measured and paid separately under relevant item No 72 to 81 of Sch 'A' as supply only (ii) Cost of minor items i.e. screws, nuts, bolts etc shall be deemed to be included in this item

Supply only heating element of capacity 2 KW, ISI marked with rubber gasket suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply only heating element of capacity 1.5 KW, ISI marked with rubber gasket suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply only thermostat, ISI marked suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply only indicator lamp suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply only geyser safety valve suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply only aluminium/chromium type flecxible connection, heavy duty for inlet, outlet connection suitable to withstand the pressure and temperature complete all as specified and as directed.

Supply only inner tank made out of steel sheet conforming to IS, suitable for 25 litres capacity of geyser, vertical type complete all as specified and as directed.

Supply only inner tank made out of steel sheet conforming to IS, suitable for 35/50 litres capacity of geyser, vertical type complete all as specified and as directed.

Supply only new base assembly with inlet and outlet pipe made out of steel sheet with gasket and proper size of nuts, bolts and washer etc suitable for 25 litres capacity of geyser complete all as specified and as directed.

Supply only repair new base assembly with inlet and outlet pipe made out of steel sheet with gasket and proper size of nuts, bolts and washer etc suitable for 35/50 litres capacity of geyser complete all as specified and as directed.

Taking down old unsv street light fittings any type from pole/ wall/ other similar situation and refixing, re-connecting the same in existing position after carrying out necessary repair/ replacement of unsv accessories to make the fittings functional, complete all as speecified and directed. Note:-Accessories required to make the fittings functional shall be measured & paid seperately as supply only under relevent items No 83 to 87 to Sch 'A'.

Supply only LED driver for street light fittings of 25 to 35 watt capacity complete all as specified and directed.

Supply only LED driver for street light fittings of 40/45 watt capacity complete all as specified and directed.

Supply only LED driver for street light fittings of 60/70 watt capacity complete all as specified and directed.

Supply only LED driver for street light fittings of 90/120 watt capacity complete all as specified and directed.

Supply only Glass cover for street light fittings upto 120 watt capacity complete all as specified and directed.

S&F thermo plastic street light weather proof out door type junction box of size 200mmx 160mm x 98mm complete with 4 way connector-01 No, 6 Amps SP MCB-01 No, easily openable and having locking arrangement including incoming and out going cable holes with fixing MS clamp and water tight polymide cable gland for each connection with & including taking down old unsv junction box, complete all as specified and directed.

Excavation in trenches n.exc 1.5M wide and n.exc 1.50M in depth for taking up or laying of under ground cable in soft/loose soil and getting out complete all as specified and as directed.

Returning, filling soil in trenches including spreading levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removal excavated soil not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as specified and as directed.

Supply and laying in trenches or passing through pipe 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 25 Sqmm 3.5 core including taking down old/ unsv cable any type complete all as specified and directed.

All as per Item No 92 above but 16 Sqmm 2 core complete all as specified and directed.

All as per Item No 92 above but 10 Sqmm 2 core complete all as specified and directed.

Supply and laying sand river for cushioning with layers of sand 8 cm before laying of cable and 15 cm after laying of cable (total 23 cm) in trenches, duly punning to a thickness of 18 cm complete all as specified & directed. ( Note: Thickness after punning shall be measured for payment )

Supply and laying burnt best quality locally available bricks laid in trenches perpendicular to UG cable for cable protection complete all as specified and as directed.

S&F in repair 40mm bore galvanised steel water tubing, light grade including all fittings laid in trenches/ fixed to pole/ along wall/ floor etc for protection of cable/ strip including fixing to pole with M.S. clamp, nuts, bolts etc complete all as specified and as directed.

Supply & fix in repair PVC insulated, 1100 volts grade, stranded aluminium conductor cable 2.5 Sqmm, twin core, connecting from Street light junction box to light fittings including taking down old/ unsv cable any type complete all as specified and directed.

S&F in repair PVC conduit/pipes 20 mm dia and fixed with the pole by clamping / saddling for protection of connecting wires, connection from junction box to light fittings, including taking down old pipe any type complete all as specified and as directed.

S&F in repair decorative gate / garden light/post top lantern made up of high grade unbreakable polycarbonate material suitable for & including 20 watt LED lamp (B22) fixed with & including stand post of 40mm dia GI pipe light grade, 1 mtr long and making connection with three core copper flexible cable of suitable size to light fitting complete all as specified and directed. Make:- Havells Cat Part No. LHFXBON1TN5Q014 or Equivalent cat part of make as specified in PS.

S&F in repair Energy efficient LED street light fittings, 35 Watt, 230 volt AC out door type with high pressure die-cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP66 protection, with inbuilt surge protection device including taking down old us light fittings any type complete all as specified and as directed. Make: HAVELLS Cat Part No. ENDCITYLITPLAT+SL35WLED757SASYBOPCWOSPD or equivalent Cat part of Make as specified in PS.

S&F in repair Energy efficient LED street light fittings, 60 Watt, 230 volt AC out door type with high pressure die-cast aluminium housing and heat resistant complete with dirver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP66 protection, with inbuilt surge protection device including taking down old us light fittings any type complete all as specified and as directed. Make: Havells Cat Part No. ENDURAPEARLNEOSL60WLED757PASYTOPC or equivalent Cat part of Make as specified in PS.

S&F in repair Energy efficient LED street light fittings, 90 Watt, 230 volt AC out door type with high pressure die-cast aluminium housing and heat resistant complete with dirver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP66 protection, with inbuilt surge protection device including taking down old us light fittings any type complete all as specified and as directed. Make: Havells Cat Part No. ENDURAOMNIPLUSSL90WLED757SASYTOPC or equivalent Cat part of Make as specified in PS.

S&F in repair Energy efficient LED light fittings, 70 Watt, die-cast aluminium body flood light, with power LED and dirver complete all as specified and as directed.

S&F street light bracket made out of GI tubing 40mm bore, medium grade, 1.5 metre long bent to shape as directed, including suitable MS clamp of MS Flat with MS bolts, nuts and washer fixed to steel tubular pole/PCC pole duly painted with two coats of aluminium paint including taking down u/s bracket any type all as specified and as directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable flat or circular of size of aluminum conductor 6 sq mm stranded conductor including taking down old UNSV cable complete all as specified and directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable flat or circular of size of aluminum conductor 10 sq mm stranded conductor including taking down old UNSV cable complete all as specified and directed.

S&F Earthing in replacement for poles and other machinery/eqpt using GI strip as earth lead and MS galvanized steel earth plate electrode 600x600x 6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate is not less than 1.5 mtr below normal ground level connected to galvanized iron strips 32x6mm with GI pipe, nuts, bolts and washers complete upto and PCC pit of required size in PCC 1:2:4 type B1 and RCC cover with frame, charcoal, common salt15cm at round the earth plate watering pipe 20mm med grade/galvanized and 40mm dia GI pipe light grade for GI strip protected steel with funnel complete all as specified and directed as shown in electrical plate No 3 of SSR Part-I 2009.

S&F in repair of aluminium strip 25 x 3.15mm with saddles and fixing screws, insulators rawal plugs etc for conductor for roof and fixed on wall upto test point complete all as specified and directed.

S&F in repair of copper strip 20 x 3.15mm with saddles and fixing screws, insulators rawal plugs etc for conductor for roof and fixed on wall upto test point complete all as specified and directed.

S&F in repair of galvanized iron strip 32 x 6mm fixed with saddles & fixing screws, PVC dash fastners, insulators fixed from test point to earth on walls or burried in ground / drawn into hume pipe complete all as specified and directed.

S&F in repair of single pointed air termination aluminium rod 12mm dia, 300 mm long complete all as specified and directed.

S&F in repair of test point terminal block made of gun metal or phosphorous bronze 75 x 75 x 25mm of 6mm thickness drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head brass screws including box of size 90 x 90 x 90mm made of 1.6mm plain sheet and screwed to wall for protection of test point complete all as specified and directed.

Taking down old solar street light fittings of any type from pole and refixing, reconnecting the same at existing position after carrying out necessary repair/replacement of unsv accessories to make the fittings functional complete all as specified and directed. Note: Accessories required to make the fittings functional shall be measured & paid separately as supply only under relevent items No 115 & 116 of Sch 'A'.

Supply only LiFe P04 battery, 12.8 Volt, 24 AH suitable for solar street light fitting complete all as specified and as directed.

Supply only Mono crystalline SPV panel suitable for solar street light fitting complete all as specified and as directed.

NATIONAL TRADING COMPANY

M/S Chib Engineers